Status: Feature Complete - Beta Testing
Upcoming: V1.0 Beta 2
LH Stinger is a no-compromise cartesian 3D Printer designed for speed and precision.
It is created as a long-lasting platform for those who like to push quality or speed to the extreme.
The project intends to become a community-driven project, not a brand.
Contents:
- BOM / Parts List / Sourcing Guide
- STL Files and Printing Instructions
- CAD Source Files
- Klipper Configuration
- Wiki / Assembly Guide (In Progress)
- Build Log / Media
- Videos
- Lightweight bed carriage assembly with carbon fiber components
- Cross Frame design focused on stiffness and stability
- Low center of gravity
- AWD stepper configuration for the Y-axis
- Optional conversion for X-axis AWD setup
- 235 mm^2 x 200mm maximum build volume (easily expandable to other sizes)
- 200 mm^2 carbon fiber bed for high-speed setup
- 235 mm^2 aluminium bed for a larger volume
- Optimized for daily print speeds of 400-600 mm/s with 20.000 mm/s^2 acceleration (Test A) (Test B) (Test C)
- Motion system capable of 1.000 mm/s speed with 100.000 mm/s^2 acceleration (Test)
- Maximum volumetric flow rate: ~55-60 mm^3/s (Test)
- Built using 30 series T-slotted extrusions with parts up to 3090
- All bracket assembly
- Genuine high-quality motion system components
- Entire motion system based on high preload MGN12H linear guide rails
- Fully belt-driven with minimal belt paths
- 9mm 2GT belt in symmetrical configuration for the Y-axis
- 6mm 2GT belts for the rest of the axis
- Independent Z stepper motors with Z Tilt capability for the X-axis
- Lightweight dual plate carbon fiber bed carriage with integrated tensioner and compatible with different bed sizes and carriage configurations
- Rigid bed mount
- Bearing supported Y-axis stepper motor shafts in double shear mounts
- High torque LDO-42STH48-2504AC stepper motors supplied with 36V for the X and Y-axis
- Dual power supply supporting 24V and 36V power standards (easily configurable for 48V)
- Driven by the Octopus Pro 1.1 board with TMC2240 drivers
- Running Klipper firmware
- Easily serviceable external electronic box with good airflow, and support for multiple power supplies, SSRs, RPi and large controller boards.
- Good cable management with a quick disconnect system between the printer and ebox
- Toolhead based on the Dragon HF hotend and HF extender
- Custom thick silicon sock mold available for RTV casting
- LDO Orbiter 2.0 direct drive extruder
- Dual 5015 fan setup for part cooling
- Adopts the Annex Engineering Quickdraw Probe
- Minimalistic printed parts design focused on strength and easy printability
- Printed in ASA, providing high temperature resistance
- Easily enclosed, with the main electronic components outside of the build chamber.
- The 200 mm^2 bed configuration can be fully enclose up to the frame bounding box. No extra space is needed for the bed movement.
Please consult the CAD Source Files for assembly instructions, and the following Wiki pages:
Build Log
Wiki / Assembly Guide (In Progress)
For support please join us on the LH Stinger Discord)
lemurshaze @ gmail.com
@LH on LH Stinger Discord
- Custom Polyimide Heater Flex PCB (In progress)
- Breakout PCB and Wire Harness
- Documentation and Assembly Guide (In progress)
- Polycarbonate EBox design
- Lightweight Toolhead based on 2510 and 3515 Delta axials
Inspired by the Annex Engineering team and community, along with the Klipper community, RatRig and all the crazy people that continue to push bed slingers to the limits. 💜
-Toolhead evolved from an amazing design by Dalegaard
-Silicon sock mold based on Renátó Kulman
-Wago 221 mounts by fns720
-SSR protection cover based on Technoturk
-3030 extrusion Cable clip based on Arthur_C
-3030 t-nut clip based on John_S
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike