Flow Chart is showing wrong value (of entity)[BUG] about power-flow-card-plus HOT 5 OPEN

@UDicke you are right, "override_state: true" also solved my issue.
Thanks for figuring this out!

The RTFM approach probably leads to success more often than I would like to admit ;)

from power-flow-card-plus.

I believe that I have found the solution for this problem today!
@Surfer2010, @dynamicpete would you please check this and confirm that your cards are also working with this.
I have read the dokumentation, go to the end...
https://github.com/flixlix/power-flow-card-plus?tab=readme-ov-file#home-configuration

So I modified "home" like this:
** home:
entity: sensor.leistung_haus_errechnet
color_value: true
name: Haus
color_icon: true
subtract_individual: true
override_state: true
individual:
- entity: sensor.2kw_laden_power
name: E-Auto 2kW
icon: mdi:car**

substract_individual: true
as this parameter reads, the individual consumptions like cars or so are substracted from home.
I'm very happy with this! Thanks again to @flixlix :-)
The result to looks like this:

from power-flow-card-plus.

Not sure if my comment is helpful, but I can confirm that for me too:
the card always shows a bit greater values than the entity itself.

from power-flow-card-plus.

Seems to get worse. Now HOME is always the same as Solar Production:
(values are the same as list on the right side)

from power-flow-card-plus.

I observe the same issue! The wrong display of entity values applies only to "home" as far as I see.
2 examples


A second card (testing) should show the same value for "Home", but does'nt. Note that the refered marked entities are always "sensor.leistung_haus_errechnet". "Solar" shows the correct value for "sensor.leistung_haus_errechnet". Both "power-flow-pus-card"s are showing wrong values for "Home". They also refer to the entity "sensor.leistung_haus_errechnet"

in addition: I am wondering where the name "Zuhause" in the 2.Card ist coming from. I never entered this name into the card.

Next day, sun is shining. "2.Card" has only the basic configuration, no car. The displayed value for "Home" is to high, in the other card the value is to low.

from power-flow-card-plus.