Comments (5)
function3d
commented on August 31, 2024
When you upload the firmware for the first time, the Wemos D1 starts a WIFI access point called PETALOT, you connect to this WIFI and navigate to the ip 192.168.1.4, here you put a free ip in your netword for the Wemos D1 as well as the parameters of your local wifi, your SSID, your WIFI password, your gateway and 255. 255.255.0 in the subnet mask, submit the form and if all goes well the Wemos D1 will connect to your WIFI and you will be able to access it through the ip you assigned in the previous step.
from petalot.
NickGreen98
commented on August 31, 2024
The WeMos D1 broadcasted the local network called petalot. None of my
devices would connect to the network to fill out the form.
…On Sun, Dec 18, 2022, 7:40 AM function3d ***@***.***> wrote:
When you upload the firmware for the first time, the Wemos D1 starts a
WIFI access point called PETALOT, you connect to this WIFI and navigate to
the ip 192.168.1.4, here you put a free ip in your netword for the Wemos D1
as well as the parameters of your local wifi, your SSID, your WIFI
password, your gateway and 255. 255.255.0 in the subnet mask, submit the
form and if all goes well the Wemos D1 will connect to your WIFI and you
will be able to access it through the ip you assigned in the previous step.
—
Reply to this email directly, view it on GitHub
<#6 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A4RYRHW5K4REWFFGUSYBW7LWN4O6FANCNFSM6AAAAAASTBXPTY>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
from petalot.
function3d
commented on August 31, 2024
working on a version that works directly by loading the firmware without the need to enter wifi data and with the possibility to configure the device from the terminal via serial communication.
from petalot.
function3d
commented on August 31, 2024
The new version is uploaded, if you decide to try it, to configure the device you can use the serial monitor of arduino IDE, after uploading the firmware, open arduino IDE and its serial monitor and restart the wemos, in the serial monitor you will see a JSON with the configuration, copy and edit it complete and paste it complete, once edited, in the serial monitor input, press enter, the device will use your edited JSON input as new configuration and will restart so it will start the process of trying to connect to your WIFI if you have entered the WIFI/network data in the new configuration.
from petalot.
function3d
commented on August 31, 2024
Hi,
FS.h is part of the core of Arduino ESP framework, did you installed it ?
https://github.com/esp8266/Arduino
"ssid":"YourWifi","password":"YourWifiPassword","LocalIP"
:"192.168.0.100","Subnet":"255.255.255.0","Gateway":"YourIpGateway"
These parameters are from your current WIFI, with these parameters the
electronics works as a client of your WIFI network instead of as an access
point.
Regards
Raul, function.3d
El mié, 4 ene 2023 a las 21:32, NickGreen98 ***@***.***>)
escribió:
… Hello,
I am still not able to connect. I am able to upload the binary using
esphome-flasher, but I am still unable to upload using arduino IDE. It is
missing the FS.h header file mentioned in conf.hpp, and I don't know what
library that came from.
As for using the serial monitor to get the ssid and pass in, here is my
output, I took out the ssid and password for safety:
To:Temperature Vo:Speed Tm:Maximum Temperature Kp:Kp Ki:Ki Kd:Kd R1:R1
Max:Maximum value for MOSFET (0-255) ssid:SSID password:SSID Password
LocalIP:IP address Subnet:Subnet Gateway:Gateway ifttt_event_name:IFTTT
Event Name ifttt_api_key:IFTTT API Key
{"To":220,"Vo":40,"Tm":250,"Kp":23,"Ki":0.043,"Kd":160,"Max":210,"ssid":"SSID","password":"PASSWORD","LocalIP":"192.168.0.100","Subnet":"255.255.255.0","Gateway":"0.0.0.0","R1":10000,"ifttt_event_name":"","ifttt_api_key":""}
...................AP Ready
—
Reply to this email directly, view it on GitHub
<#6 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A2GTVH53CCM6FCMJND2TDJ3WQXM55ANCNFSM6AAAAAASTBXPTY>
.
You are receiving this because you modified the open/close state.Message
ID: ***@***.***>
from petalot.
Related Issues (20)
- Wemos D1 Mini (4mb) fried HOT 1
- Just a little doubt HOT 4
- Heatblock not heating HOT 3
- Stepper motor doesnt spin HOT 3
- d1 mini does not create wifi network HOT 6
- compilation ide
- Which board to use in Arduino IDE? HOT 1
- machine the hotend HOT 1
- What filament did you use to print the parts? HOT 5
- Wood specs HOT 1
- Include original project files
- end of course question! HOT 4
- Length of the 6mm threaded rod. HOT 1
- Dead links to AliExpress HOT 2
- Configs! HOT 1
- Size bolts HOT 1
- Nema 17 HOT 7
- Include ESPHome config file HOT 6
- Need of deactivating the 3g/4g connection before trying to conect to the "petalot" ssid HOT 3
- Nothing shows up after connection to the "petalot" ssid
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from petalot.