PMSX003 Sleep mode about iaq_board HOT 3 CLOSED

Hi,

Actually it's there, but commented:

There is a switch pms_set which is always on, but you can uncomment this setting and tweak it. If you uncomment it it will run for 10s each 60s. However keep in mind that the fan needs to work sometime in order to get correct data. I think 10s is enough. But I don't use it on any of my devices. You can tweak it and rebuild the binary if you want to turn it on and off. Also by having this pms_set switch you can turn it on demand by the home assistant (like only when you need to know the PM values).

P.S. you have very good hearing, or the PMS sensor is faulty. :) I had a device 40cm from my head and I do not hear it during the night.

from iaq_board.

Ohhh nice! Will give it a try. Thanks so much!

from iaq_board.

Alright, I got it working. I don't have the full device just a few sensors connected through dupont cables on the breakout board. Looking at the schematics there's a pms_set that also needs to be connected but I guess in that case I will have to use the other connectors and not the dupont! :(

from iaq_board.