Comments (14)
@zirill Thank you for a well worded description of your issue.
Instead of installing the latest release, I would suggest installing the 16.03 release.
I am fairly sure the 16.06 release is having issues.
http://builds.96boards.org/releases/dragonboard410c/qualcomm/android/16.03/
Besides this, your process looks fine. The fact that the User LED 4 turns on and then turns off during boot is also a good sign. Once the LED turns off, a few moments later you should see an Android screen pop up on your display (please provide a minute or two).
If you are still experiencing issues with the 16.03 release, please let me know. Please also report back if you are successful in the install.
Thanks! Happy New Year!
from documentation.
Thank you.
I installed dragonboard410c_sdcard_install_android-99.zip. Reboot and I waited(after LED off) more than 10 minutes, but nothing happened ((
The monitor has not lighted
Happy New Year!
from documentation.
@zirill Happy New Year,
I am sorry you are still having issues. Would you be able to stop by OpenHours this week?
4:00p UTC / 8:00a PST - starting time is at the end of the countdown...
from documentation.
Please write the steps you need to do.
from documentation.
@zirill Can you try fastboot method here?
from documentation.
I've not run Android in ages but on DB410C there is no bootloader splash screen and the main video stack does not start until the first-boot optimizations are complete. Thus it takes a very long time for an image to appear on the first boot (>2 minutes I think).
If you have waits "a long time" already then the other issue is that, compared to the Debian images, Android is significantly more fussy regarding the display device. IIRC it makes no attempt to probe the monitor to discover what video modes are supports and it outputs full HD (1080p60) by default.
Personally I doubt the problem is causes by a failed installation. We know the installer works because we could use it to install Debian. It is much more likely to be one of the issues above.
from documentation.
- i switch on DragonBoard™ 410c must be set to ‘0-0-0-0’. All switches should be in “off” position
- I connected to the TV(FHD) and it worked
PS: monitor(FHD) for some reason did not want to
from documentation.
how to get access to "adb"?
from documentation.
sudo apt-get install android-tools-adb
from documentation.
ADB write that without access to the device:
console: "???????????? no permission"
also with cable connection, lock the mouse
from documentation.
Try sudo with the adb commands, or refer to Section 3.2 of https://developer.qualcomm.com/qfile/28828/lm80-p0436-2_sw-build-and-install_gd_linux_android.pdf.
You can only use the microusb or (regular) usb one at a time so if you have an active adb connection on the board, any mouse or keyboard connected to it will not work. See http://www.96boards.org/forums/topic/android-on-96boards-faq/#post-14462 for details. Sorry :(.
from documentation.
@zirill I would like to close this issue.
Are you still having problems when flashing Android to your 96Boards?
from documentation.
I need help! currently i am doing work from windows10 and downloaded Debian image file from https://www.96boards.org/documentation/consumer/dragonboard410c/downloads/debian.md.html and trying to boot it from SD card but i am not able get a dialogue box for installing operating system in Dragonboard410c. I had properly wrote the image file into SD card(8GB) through win32diskimager. While flashing through SD card on board ,i am getting a command saying linaro username and password .What should i do next .Please help me fast ,if anyone knows the solution.
from documentation.
@Ankitaasharmaa this issue section is for issues related to only the documentation section of our website. Any issues related to the software running on any of our boards or issues related to the hardware itself need to be asked on our forum: https://discuss.96boards.org
from documentation.
Related Issues (20)
- -i96/hardware-docs/README.md
- Problem with _documentation/consumer/ultra96/ultra96-v2/installation/board-recovery.md
- Problem with _documentation/consumer/dragonboard/qualcomm-robotics-rb5/downloads/open-embedded.md
- db820c board specific guide links to db410c
- Problem with booting OPTEE on HiKey board HOT 6
- Problem with building OPTEE with benchmark HOT 1
- Problem with documentation for MIPI Camera Mezzanine for 96Boards
- Problem with _documentation/consumer/ultra96/ultra96-v2/README.md
- Edit on github links are broken
- RB5 install docs do not mention OpenEmbedded/RPB
- Add Stinger96 "getting started" document
- Links for Hikey 620 recovery files not found HOT 3
- Instructions to enable spidev on DB410C no longer work with 21.12 (and later) releases
- Problem with "/documentation/consumer/dragonboard/dragonboard845c/hardware-docs/files/rb3-hardware-user-manual.pdf"
- Add a new 96 board
- Problem with _documentation/iot/orangepi-i96/downloads/README.md
- Add a new board: RS-G2L100
- Missing Produkt Link in Documentation HOT 1
- Problem with _documentation/consumer/hikey/hikey970/downloads/aosp.md HOT 1
- Problem with _documentation/consumer/dragonboard/dragonboard845c/installation/board-recovery.md
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from documentation.