installing on PI 2 and choosing arcade 6 button , after reboot PI input doesnt work about adafruit-retrogame HOT 8 CLOSED

Tested against both Nov 2016 Raspbian and latest Retropie. Buttons, keyboard and network all continue to function.

Confirm that /boot/retropie.cfg corresponds to your actual button/stick wiring, using Broadcom GPIO pin numbers, and that these are not shared with any other GPIO-attached hardware.

from adafruit-retrogame.

i have 0 connections to any gpio pins, which pi are you testing on , im on a pi 2 with just a usb keyboard connected.

i use win32imager to put either retropie image or raspian , boot up and everything is fine. i run

cd
curl -O https://raw.githubusercontent.com/adafruit/Raspberry-Pi-Installer-Scripts/master/retrogame.sh
sudo bash retrogame.sh

and i choose 6 button and it asks me to reboot. once i reboot no network connection and no keyboard working.

from adafruit-retrogame.

Tested on v 1.1 and 1.2 Pi 2 hardware. USB keyboard, Ethernet and HDMI connected. Still can't reproduce. Anything else unique about the setup?

from adafruit-retrogame.

just have the pi attached to hdmi , usb keyboard , cat5 for network, nothing on the gpio pins
retropie-4.1-rpi2_rpi3.img on a sony sd card. its only after i run the script that everything fails after reboot. no network, no usb

from adafruit-retrogame.

are you testing on pi2?

from adafruit-retrogame.

yes he tested on a pi 2

from adafruit-retrogame.

would the code work on a model B or would you have to change alot of code?

from adafruit-retrogame.

it should work on any pi

from adafruit-retrogame.