Using a source volume and receiver volume. about crescendo-for-crestron HOT 2 OPEN

Assuming you are using the Crestron official Sonos Device module to control the variable volume level of a Port or Connect unit:

One simple solution is to connect the receiver's volume up/down/mute and level feedback to your TV's switcher \x71. Assign volume relative on this module.

Attach the Sonos volume up/down/mute and level feedback signals to your receiver's switcher module \x61. Assign volume relative on this module.

With this configuration the volume controls will be automatically mapped to the video switcher when a video source is in use. When an audio only source is in use the volume controls will map from the audio switcher. If Sonos is your only audio source, this solution is simple and should work well without requiring additional switchers for the room.

Another method is to use the room's Source_Is feedback with the analog_equate symbol to enable buffers for the volume controls. See image attached

.

from crescendo-for-crestron.

We offer personalized consulting and programming should you require it. Email me at [email protected] if you would like more information, and thank you for using the framework.

from crescendo-for-crestron.