PiShock compatible? about shockies HOT 4 OPEN

Hi there @jae1911
The wip_new_collar branch actually contains support for transmitting to both PiShock collar types. There's a few bugs I still need to work out, I've just been working on other things.

That branch also moves away from arduino IDE to using VSCode/PlatformIO since that's a bit easier to maintain.

Feel free to give it a try and let me know if it works for you.

from shockies.

@jae1911
I cleaned a few things up and merged the wip_new_collar branch into master, and made a release with v1.4.0 containing those fixes.

https://github.com/Aerizeon/Shockies/releases has the firmware files, if you have a new enough firmware that allows for updating via the web. You will need to rename it to Shockies.ino.bin and Shockies.spiffs.bin to update (and will need to do them one at a time)

Let me know if you run into any issues.

For reference, the newer PiShock collar is the same as the FunniPets collar, and the old PiShock collar is the same as the Petrainer collar

from shockies.

I vaguely recall the new ones being based on the ESP platform - if so, it would definitely be possible, although I would have to change the pinout. Do you happen to own one of those devices?

I misread the question here - it was about the shocker instead of the ESP hardware. Yes, it's possible (and has been implemented in a newer version)

from shockies.

I do have one of those devices, so I will soon be able to test anything (some parts are still in shipping).
Not sure about the model of that thing, tho, but from what I've gathered, it's a newer model.

from shockies.