关于.log 文件生成的问题 about tfusion HOT 13 CLOSED

你好，rank-reid/pretrain/路径下的pair_transfer.py 怎么没有呢？可以上传上去吗？

from tfusion.

Log(actually they are experiment results) are generated by rank-reid/rank-reid.py calledy by TrackViz/ctrl/transfer.py. Actually, you only need to modify the pathes, pretrain models using rank-reid/pair_train.py, then run ctrl transfer.py. Details are instructed in TFusion README.

from tfusion.

模型训练好了，路径也改了，运行transfer.py，只有cuhk_market-train,,cuhk_market-test这些文件夹，但里面是空的，没有保存的.log文件。

from tfusion.

• renew_pid.log and renew_ac.log are produced in rank-reid project when called by TrackViz/ctrl/transfer.py. Read the code in the hyper link and you will understand the schedule.

• pair_transfer.py isn't used in the release code, so we remove it.

from tfusion.

十分感谢！！！

from tfusion.

不好意思，再请教一下，cross_filter_pid.log是哪个文件生成的？

from tfusion.

You can search cross_filter_pid.log in the project to understand the generation procedure.

from tfusion.

查看了所有的程序，只有读，没有写入。不知道怎么解决？

from tfusion.

我也遇到了这个问题，生成不了log文件。

from tfusion.

@ahangchen
你好，cross_filter_pid.log 这个文件是什么意思？ 怎么生成的，找不到 谢谢

from tfusion.

@Huangdai Look at these lines and make sure they are the same with the TrackViz @ 5a5c8a0

@houzhenzhen you can search in TrackViz, it's defined in profile/fusion_param.py

Attention: make sure you are using the repos with commit id specified in TFusion. You should use TrackViz@5a5c8a0 and rank-reid@b228897 because the master branches of TrackViz and rank-reid are under developing, so you will meet some errors if you use other version repos.

from tfusion.

作者你好，我也在仿真你的代码，可是按你的操作实践起来很困难，比如log文件缺失，但你也并没有在readme.md中写明如何生成log文件，真的很不友好~

from tfusion.

@YuehuaZhu 如果你按照readme的流程操作是不会有文件缺失的问题的，文档不能包含所有的细节，在这个issue里我已经补充过这些文件的来源了。

from tfusion.