Powerwall & Car Issue: Values appear to not be updating unless integration is reloaded about tesla HOT 20 CLOSED

I have the same issue.

As far as a I can tell commands that are sent are actioned, but the status is not being updated in response to these commands or any changes made via the Tesla App, unless you reload the integration.

e.g. I can set my Powerwall to Self Powered Mode, either using the integration, or the Tesla App but this change is not reflected in the integration status, it still says Time Based.

As above this seems to have happened since my Powerwall had a firmware update last Thursday (to 24.4.0 0fe780c9)

from tesla.

I can see on my stats that this also stopped getting updated at the same time as the %age issue arose (for powerwall) #919

from tesla.

Seeing the same behaviour here. Also using the controls like changing the Backup Reserve or changing the Operation Mode (Self-Powered, Time-Based Control, etc) aren’t working at all 😢

Are there any known workarounds for this?

Many thanks,

David

EDIT: Ok it seems to be working now, at least my overnight automations which set the operation mode and backup reserve are working ... not sure why using the controls in real-time didn't work, but I'm not going to touch anything now in case it breaks again 😆

from tesla.

Same issue here

from tesla.

I have the same issue.

As far as a I can tell commands that are sent are actioned, but the status is not being updated in response to these commands or any changes made via the Tesla App, unless you reload the integration.

e.g. I can set my Powerwall to Self Powered Mode, either using the integration, or the Tesla App but this change is not reflected in the integration status, it still says Time Based.

As above this seems to have happened since my Powerwall had a firmware update last Thursday (to 24.4.0 0fe780c9)

It may be early days but I think the workaround from here

#919 (comment)

Seems to make my data update again

from tesla.

Seems that car part is updating again correctly but not PW part still. I haven't made any changes.

from tesla.

I also have the same issue, none of the sensors appear to be working, battery, battery remaining, load power, solar power etc This seems to have happened since installing HA core 2024.3.1 to 2024.3.3 yesterday.

from tesla.

I also have the same issue, none of the sensors appear to be working, battery, battery remaining, load power, solar power etc This seems to have happened since installing HA core 2024.3.1 to 2024.3.3 yesterday.

Not sure if you saw my post further up, but doing this workaround seems to have resolved the values not updating for me.

I decided to move over to the HA inbuilt Powerwall Integration for monitoring the battery level and reserve until the custom integration is updated and works again.

#922 (comment)

from tesla.

from tesla.

Is this integration going unavailable at all for you? Or is it just not updating?

from tesla.

Is this integration going unavailable at all for you? Or is it just not updating?

It doesn't update unless you make the changes listed above.
#919 (comment)

from tesla.

Is this integration going unavailable at all for you? Or is it just not updating?

It doesn't update unless you make the changes listed above. #919 (comment)

Both. I'm seeing them not update and also all sensors go unavailable after a certain amount of time. I'm catching up and trying to figure out if it's related to this issue, fleet api (I only have powerwall), or something else. I just commented out line 94 per that workaround.

from tesla.

Same problem here. Powerwall data will only update if the integration is reloaded. Spent an hour with Tesla tech support and they claimed nothing changed on their end, but not sure I buy that.

from tesla.

I also have the same issue, none of the sensors appear to be working, battery, battery remaining, load power, solar power etc This seems to have happened since installing HA core 2024.3.1 to 2024.3.3 yesterday.

My integration worked for me last week following a Tesla update, however, since I applied the HA core update yesterday all values are now greyed out, current Tesla firmware is 23.36.3 aa269d35, HA core is now 2024.4.0

from tesla.

I've seen this consistently now for the last week and half, but wasn't sure if it was related to this issue per my comments above since I only have Powerwalls and do not have cars. Either way, #937 confirmed this is the same issue.

Commenting out line 94 did not work for me as the sensors report values after a reload/reboot, but then stop after a period of time and become unavailable.

Does this mean it needs to use the FleetAPI? Even though there are no cars?

from tesla.

I also have the same issue, none of the sensors appear to be working, battery, battery remaining, load power, solar power etc This seems to have happened since installing HA core 2024.3.1 to 2024.3.3 yesterday.

I think I’ve seen this as well. I updated HA yesterday and the sensors have stopped reporting. It looks like changing the battery reserve is however still working . For reference I only have a powerwall no car.

from tesla.

As per above

“It doesn't update unless you make the changes listed above. https://github.com/alandtse/tesla/issues/919#issuecomment-2019693873”

this did not work for me. The values do update once when it’s reloaded but don’t refresh after that.

from tesla.

Is this still an issue? There have been some changes around this area that might have resolved it.

from tesla.

from tesla.

Now resolved by recent integration updates.

from tesla.