Giter VIP home page Giter VIP logo

Comments (26)

dwyn avatar dwyn commented on May 24, 2024 2

I figured it out! Two things were at play:

  1. My Algolia trail expired. I needed to switch to a community plan, or a paid plan. My account was in limbo. (hence gatsby develop no longer working.)

  2. When I run gatsby develop my .env file is used.
    When I run gatsby build the app searches for a .env.production file, and I did not have one. Creating the .env.production and putting my credentials in that file did the trick.

Thanks for your help @Haroenv .

from gatsby-plugin-algolia.

Kn99HN avatar Kn99HN commented on May 24, 2024 2

Thanks @Isaac-Tait! We figured it out. Turns out that Netlify triggers another build on another account hence it fails on those builds because no env variables were set up in Netlify

from gatsby-plugin-algolia.

dwyn avatar dwyn commented on May 24, 2024 1

Hey @Haroenv, Thanks for getting back to me so quickly. Yes it does consistently fail. BUT I plugged the credentials directly into the gatsby-config file (instead of calling it from my .env file) and it worked!

  1. How would I go about logging the appid and apikey before instantiating the plugin?
  2. How would I go about debugging why gatsby isnt reading from my .env file?

Thanks for your patience - I am fairly new to all of this.

from gatsby-plugin-algolia.

lettie16 avatar lettie16 commented on May 24, 2024 1

Whether you're on the free version of Algolia or not doesn't make a difference @lettie16. Did you pass the environment variables to Gatsby cloud? Can you try logging out the values that you pass to the plugin to see if they're set?

I would imagine they would have been passed as we also have Contentful variables being passed. But I didn't set up the environment so not sure. Where do I need to look to see if they are being passed to Gatsby Cloud. They are definitely in the .env.production file

All sorted cheers. Although as a note should anyone else stumble upon this issue. Once the variables were added I still had errors with undefined. This was resolved by create Gatsby_ pre-fixed env vars which were needed for Gatsby Cloud to find them.

from gatsby-plugin-algolia.

lettie16 avatar lettie16 commented on May 24, 2024 1

@Isaac-Tait in netlify we have both the GATSBY_ prefix and the standard Algolia VARS set up and it is working fine. I think but I may be wrong you need the GATSBY_ ones so Gatsby can build it and the standard Algolia ones so it works when it's built. You would also need both in your .env file as well.

from gatsby-plugin-algolia.

Haroenv avatar Haroenv commented on May 24, 2024 1

the values of the environment is kept secret (which is good, don't post that publicly), but I assume the value isn't right

from gatsby-plugin-algolia.

Haroenv avatar Haroenv commented on May 24, 2024

Does this consistently fail? Can you log the appId & apiKey before instantiating the plugin?

from gatsby-plugin-algolia.

Haroenv avatar Haroenv commented on May 24, 2024 
// in Gatsby-config.js

console.log(process.env); // should show all registered env variables

from gatsby-plugin-algolia.

kelvinauta avatar kelvinauta commented on May 24, 2024

¡Me lo imaginé! Dos cosas estaban en juego:

  1. Mi rastro de Algolia expiró. Necesitaba cambiarme a un plan comunitario o un plan pagado. Mi cuenta estaba en el limbo. (Por lo tanto, gatsby developya no funciona).
  2. Cuando ejecuto gatsby developmi .envarchivo se utiliza.
    Cuando ejecuto gatsby buildla aplicación busca un .env.productionarchivo, y no tenía uno. Crear .env.productiony poner mis credenciales en ese archivo fue el truco.

Gracias por tu ayuda @Haroenv .

Hello, my site uses Netlify connected to github, obviously I cannot upload my credentials ".env.production" to github, you can see the environment variables to netlify. What is the solution?

from gatsby-plugin-algolia.

Haroenv avatar Haroenv commented on May 24, 2024

You put your environment variables in the Netlify control panel (build settings)

from gatsby-plugin-algolia.

lettie16 avatar lettie16 commented on May 24, 2024

Having the same issue as original poster. Checked .env variables are there for both production and development and I'm running the Alogolia Free version for testing and well within limits. Everything works fine in develop so do we know if the Free version would be effecting this in a production build on Gatsby Cloud?

from gatsby-plugin-algolia.

Haroenv avatar Haroenv commented on May 24, 2024

Whether you're on the free version of Algolia or not doesn't make a difference @lettie16. Did you pass the environment variables to Gatsby cloud? Can you try logging out the values that you pass to the plugin to see if they're set?

from gatsby-plugin-algolia.

lettie16 avatar lettie16 commented on May 24, 2024

Whether you're on the free version of Algolia or not doesn't make a difference @lettie16. Did you pass the environment variables to Gatsby cloud? Can you try logging out the values that you pass to the plugin to see if they're set?

I would imagine they would have been passed as we also have Contentful variables being passed. But I didn't set up the environment so not sure. Where do I need to look to see if they are being passed to Gatsby Cloud. They are definitely in the .env.production file

from gatsby-plugin-algolia.

Haroenv avatar Haroenv commented on May 24, 2024

glad to hear you've sorted this, and thanks for letting everyone who bumps into this next of the solution @lettie16, I haven't used Gatsby cloud before, so didn't know about this limitation

from gatsby-plugin-algolia.

Isaac-Tait avatar Isaac-Tait commented on May 24, 2024

I am running into this issue as well.

When I run gatsby build I am returning this error:

 ERROR #11321  PLUGIN

"gatsby-plugin-algolia" threw an error while running the onPostBuild lifecycle:

Please provide an application ID. Usage: algoliasearch(applicationID, apiKey, opts)

  44 |   }
  45 |
> 46 |   const client = algoliasearch(appId, apiKey);
     |                  ^
  47 |
  48 |   setStatus(activity, `${queries.length} queries to index`);
  49 |

File: node_modules/gatsby-plugin-algolia/gatsby-node.js:46:18

  AlgoliaSearchError: Please provide an application ID. Usage: algoliasearch(applicationID, apiKey, opts)

AlgoliaSearchCore.js:50 AlgoliaSearchNodeJS.AlgoliaSearchCore
    [gatsby-fallfish-tenkara-blog]/[algoliasearch]/src/AlgoliaSearchCore.js:50:11

  - AlgoliaSearch.js:11 AlgoliaSearchNodeJS.AlgoliaSearch
    [gatsby-fallfish-tenkara-blog]/[algoliasearch]/src/AlgoliaSearch.js:11:21

  - AlgoliaSearchServer.js:17 AlgoliaSearchNodeJS.AlgoliaSearchServer
    [gatsby-fallfish-tenkara-blog]/[algoliasearch]/src/server/builds/AlgoliaSearchServer.js:17:17

  - node.js:83 new AlgoliaSearchNodeJS
    [gatsby-fallfish-tenkara-blog]/[algoliasearch]/src/server/builds/node.js:83:23

  - node.js:68 algoliasearch
    [gatsby-fallfish-tenkara-blog]/[algoliasearch]/src/server/builds/node.js:68:10

  - gatsby-node.js:46 Object.exports.onPostBuild
    [gatsby-fallfish-tenkara-blog]/[gatsby-plugin-algolia]/gatsby-node.js:46:18

  - api-runner-node.js:485 runAPI
    [gatsby-fallfish-tenkara-blog]/[gatsby]/src/utils/api-runner-node.js:485:22

  - api-runner-node.js:636 Promise.catch.decorateEvent.pluginName
    [gatsby-fallfish-tenkara-blog]/[gatsby]/src/utils/api-runner-node.js:636:13

  - debuggability.js:384 Promise._execute
    [gatsby-fallfish-tenkara-blog]/[bluebird]/js/release/debuggability.js:384:9

  - promise.js:518 Promise._resolveFromExecutor
    [gatsby-fallfish-tenkara-blog]/[bluebird]/js/release/promise.js:518:18

  - promise.js:103 new Promise
    [gatsby-fallfish-tenkara-blog]/[bluebird]/js/release/promise.js:103:10

  - api-runner-node.js:634
    [gatsby-fallfish-tenkara-blog]/[gatsby]/src/utils/api-runner-node.js:634:16

  - util.js:16 tryCatcher
    [gatsby-fallfish-tenkara-blog]/[bluebird]/js/release/util.js:16:23

  - reduce.js:166 Object.gotValue
    [gatsby-fallfish-tenkara-blog]/[bluebird]/js/release/reduce.js:166:18

  - reduce.js:155 Object.gotAccum
    [gatsby-fallfish-tenkara-blog]/[bluebird]/js/release/reduce.js:155:25

  - util.js:16 Object.tryCatcher
    [gatsby-fallfish-tenkara-blog]/[bluebird]/js/release/util.js:16:23


not finished onPostBuild - 0.194s

I have the following in my .env.production file:

GATSBY_ALGOLIA_APP_ID=xxxx
GATSBY_ALGOLIA_SEARCH_KEY=xxxxxx
GATSBY_ALGOLIA_INDEX_NAME=xxxx
ALGOLIA_ADMIN_KEY=xxxxxx

I have also added the above fields to Netlify -> Site settings -> Build & Deploy (but without the prepended GATSBY_)

I read over the Gatsby docs re: @lettie16 suggestion and I believe I have implemented Gatsby Enviroment Variables correctly...

from gatsby-plugin-algolia.

Haroenv avatar Haroenv commented on May 24, 2024

what about your Gatsby config @Isaac-Tait ?

from gatsby-plugin-algolia.

Isaac-Tait avatar Isaac-Tait commented on May 24, 2024

@Haroenv

require("dotenv").config({
  path: `.env.${process.env.NODE_ENV}`,
})

const BlogQuery = `
  {
    {
      allMarkdownRemark {
        nodes {
          frontmatter {
            description
            tags
            title
          }
          internal {
            content
          }
        }
      }
    }
`;

const queries = [
  {
    query: BlogQuery,
    transformer: ({ data }) => data.allMarkdownRemark.nodes, // optional
    settings: {
      // optional, any index settings
      // Note: by supplying settings, you will overwrite all existing settings on the index
    },
    matchFields: ['slug', 'modified'],
  }
]

<the rest of my config>

    {
      // This plugin must be placed last in your list of plugins to ensure that it can query all the GraphQL data
      resolve: `gatsby-plugin-algolia`,
      options: {
        appId: process.env.ALGOLIA_APP_ID,
        // Use Admin API key without GATSBY_ prefix, so that the key isn't exposed in the application
        // Tip: use Search API key with GATSBY_ prefix to access the service from within components
        apiKey: process.env.ALGOLIA_API_KEY,
        indexName: process.env.ALGOLIA_INDEX_NAME, // for all queries
        queries,
        chunkSize: 10000, // default: 1000
        settings: {
          // optional, any index settings
          // Note: by supplying settings, you will overwrite all existing settings on the index
        },
        enablePartialUpdates: true, // default: false
        matchFields: ['slug', 'modified'], // Array<String> default: ['modified']
        concurrentQueries: false, // default: true
        skipIndexing: false, // default: false, useful for e.g. preview deploys or local development
      },
    },

from gatsby-plugin-algolia.

Isaac-Tait avatar Isaac-Tait commented on May 24, 2024

@lettie16 In my .env.production file I have the Algolia variable pre-pended with GATSBY_. In the gatsby-config.js file though I have left the variables as is from the Algolia Gatsby plugin README.md doc

The plugin docs also specify that the:

Use Admin API key without GATSBY_ prefix, so that the key isn't exposed in the application

Are you saying that you changed the apiKey and the indexName from:

        apiKey: process.env.ALGOLIA_API_KEY,
        indexName: process.env.ALGOLIA_INDEX_NAME,

to

        apiKey: process.env.GATSBY_ALGOLIA_API_KEY,
        indexName: process.env.GATSBY_ALGOLIA_INDEX_NAME,

???

Thank you for your response. I am not sure what I am doing wrong to cause this or if it is a bug...

from gatsby-plugin-algolia.

Haroenv avatar Haroenv commented on May 24, 2024

you should leave the process variables the same in the config, without GATSBY (since otherwise you leak them to the frontend), but you need to make sure that they're set in netlify too, in there I only see the GATSBY_ prefixed ones in your post @Isaac-Tait

from gatsby-plugin-algolia.

Isaac-Tait avatar Isaac-Tait commented on May 24, 2024

@Haroenv This is what I have in Netlify...

Screen Shot

Just to clarify I have not pre-pended the variables with GATSBY in gatsby.config, just the .env.production file...

Here is a link to my repo if it may be helpful

from gatsby-plugin-algolia.

Haroenv avatar Haroenv commented on May 24, 2024

I'm not sure what's going on without looking at the exact values you are passing into the plugin are by console.logging in the Gatsby config you're using on netlify. Unfortunately this is very hard to debug without having access to the configurations

from gatsby-plugin-algolia.

Isaac-Tait avatar Isaac-Tait commented on May 24, 2024

Thank you for walking me through this @Haroenv... Looking at my Deploy Logs on Netlify I am getting this:

7:06:55 AM: [Algolia] 1 queries to index
7:06:55 AM: [Algolia] Running 1 query for index ****...
7:06:55 AM: error failed to index to Algolia
7:06:55 AM: 
7:06:55 AM: 
7:06:55 AM:   GraphQLError: Syntax Error: Expected Name, found {
7:06:55 AM:   
7:06:55 AM:   - graphql-runner.ts:88 GraphQLRunner.parse
7:06:55 AM:     [repo]/[gatsby]/src/query/graphql-runner.ts:88:34
7:06:55 AM:   
7:06:55 AM:   - graphql-runner.ts:161 GraphQLRunner.query
7:06:55 AM:     [repo]/[gatsby]/src/query/graphql-runner.ts:161:27
7:06:55 AM:   
7:06:55 AM:   - create-graphql-runner.ts:59 
7:06:55 AM:     [repo]/[gatsby]/src/bootstrap/create-graphql-runner.ts:59:8
7:06:55 AM:   
7:06:55 AM:   - gatsby-node.js:381 getObjectsMapByQuery
7:06:55 AM:     [repo]/[gatsby-plugin-algolia]/gatsby-node.js:381:24
7:06:55 AM:   
7:06:55 AM: 
7:06:55 AM: not finished onPostBuild - 0.352s
7:06:55 AM: npm ERR! code ELIFECYCLE
7:06:55 AM: npm ERR! errno 1
7:06:55 AM: npm ERR! [email protected] build: `gatsby build`
7:06:55 AM: npm ERR! Exit status 1
7:06:55 AM: npm ERR!
7:06:55 AM: npm ERR! Failed at the [email protected] build script.
7:06:55 AM: npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
7:06:55 AM: npm ERR! A complete log of this run can be found in:
7:06:55 AM: npm ERR!     /opt/buildhome/.npm/_logs/2021-03-04T15_06_55_822Z-debug.log
7:06:55 AM: ​
7:06:55 AM: ────────────────────────────────────────────────────────────────
7:06:55 AM:   "build.command" failed                                        
7:06:55 AM: ────────────────────────────────────────────────────────────────
7:06:55 AM: ​
7:06:55 AM:   Error message
7:06:55 AM:   Command failed with exit code 1: npm run build
7:06:55 AM: ​
7:06:55 AM:   Error location
7:06:55 AM:   In Build command from Netlify app:
7:06:55 AM:   npm run build
7:06:55 AM: ​
7:06:55 AM:   Resolved config
7:06:55 AM:   build:
7:06:55 AM:     command: npm run build
7:06:55 AM:     commandOrigin: ui
7:06:55 AM:     environment:
7:06:55 AM:       - ALGOLIA_ADMIN_KEY
7:06:55 AM:       - ALGOLIA_API_KEY
7:06:55 AM:       - ALGOLIA_APP_ID
7:06:55 AM:       - ALGOLIA_BASE_URL
7:06:55 AM:       - ALGOLIA_INDEX_NAME
7:06:55 AM:     publish: /opt/build/repo/public
7:06:55 AM:   plugins:
7:06:55 AM:     - inputs: {}
7:06:55 AM:       origin: ui
7:06:55 AM:       package: '@algolia/netlify-plugin-crawler'
7:06:56 AM: Caching artifacts

Would this help at all?

from gatsby-plugin-algolia.

Isaac-Tait avatar Isaac-Tait commented on May 24, 2024

I removed the prepended GATSBY_ from the variables in my .env.production file. Now the error is gone but the onPostBuild is failing... When I put GATSBY_ before the variable names the error returns:

 ERROR #11321  PLUGIN

"gatsby-plugin-algolia" threw an error while running the onPostBuild lifecycle:

Please provide an application ID. Usage: algoliasearch(applicationID, apiKey, opts)

  44 |   }
  45 |
> 46 |   const client = algoliasearch(appId, apiKey);
     |                  ^
  47 |
  48 |   setStatus(activity, `${queries.length} queries to index`);
  49 |

File: node_modules/gatsby-plugin-algolia/gatsby-node.js:46:18



  AlgoliaSearchError: Please provide an application ID. Usage: algoliasearch(applicationID, apiKey, opts)

For experimentation sake I changed the gatsby.config file to (even though the docs say not to):

    {
      resolve: `gatsby-plugin-algolia`,
      options: {
        appId: process.env.GATSBY_ALGOLIA_APP_ID,
        apiKey: process.env.GATSBY_ALGOLIA_SEARCH_KEY,
        indexName: process.env.GATSBY_ALGOLIA_INDEX_NAME,
        queries,
        chunkSize: 1000,
      },
      enablePartialUpdates: true,
      matchFields: ['slug', 'modified'],
    },

and the onPostBuild still failed.

I have reverted to removing all GATSBY_ prependings from the .env.production and gatsby-config files.

from gatsby-plugin-algolia.

Isaac-Tait avatar Isaac-Tait commented on May 24, 2024

I found this closed issue and tried "adding the modified field into both queries and adding the matchFields setting to the plugin settings passing modified in the array." and that did not resolve the onPostBuild failure.

I have all the variables found in the .env.production listed within Netlify -> Build & deploy -> Variables (which I have read if those are missing can cause the onPostBuild to fail...).

from gatsby-plugin-algolia.

Kn99HN avatar Kn99HN commented on May 24, 2024

Hi,

We are currently running in the same problem with the Algolia and Netlify build. Some of the builds are failing while the some are working properly. I'm wondering if anyone has a pointer how to resolve this. The error log is:

11:58:29 PM: Please provide an application ID. Usage: algoliasearch(applicationID, apiKey, opts)
11:58:29 PM:   45 |   }
11:58:29 PM:   46 |
11:58:29 PM: > 47 |   const client = algoliasearch(appId, apiKey, { timeout: 30_000 });
11:58:29 PM:      |                  ^
11:58:29 PM:   48 |
11:58:29 PM:   49 |   setStatus(activity, `${queries.length} queries to index`);
11:58:29 PM:   50 |
11:58:29 PM: 
11:58:29 PM: 
11:58:29 PM:   AlgoliaSearchError: Please provide an application ID. Usage: algoliasearch(app  licationID, apiKey, opts)
11:58:29 PM:   
11:58:29 PM:   - AlgoliaSearchCore.js:50 AlgoliaSearchNodeJS.AlgoliaSearchCore
11:58:29 PM:     [repo]/[gatsby-plugin-algolia]/[algoliasearch]/src/AlgoliaSearchCore.js:50:1    1
11:58:29 PM:   
11:58:29 PM:   - AlgoliaSearch.js:11 AlgoliaSearchNodeJS.AlgoliaSearch
11:58:29 PM:     [repo]/[gatsby-plugin-algolia]/[algoliasearch]/src/AlgoliaSearch.js:11:21
11:58:29 PM:   
11:58:29 PM:   - AlgoliaSearchServer.js:17 AlgoliaSearchNodeJS.AlgoliaSearchServer
11:58:29 PM:     [repo]/[gatsby-plugin-algolia]/[algoliasearch]/src/server/builds/AlgoliaSear    chServer.js:17:17
11:58:29 PM:   
11:58:29 PM:   - node.js:83 new AlgoliaSearchNodeJS
11:58:29 PM:     [repo]/[gatsby-plugin-algolia]/[algoliasearch]/src/server/builds/node.js:83:    23
11:58:29 PM:   
11:58:29 PM:   - node.js:68 algoliasearch
11:58:29 PM:     [repo]/[gatsby-plugin-algolia]/[algoliasearch]/src/server/builds/node.js:68:    10
11:58:29 PM:   
11:58:29 PM:   - gatsby-node.js:47 Object.exports.onPostBuild
11:58:29 PM:     [repo]/[gatsby-plugin-algolia]/gatsby-node.js:47:18
11:58:29 PM:   
11:58:29 PM:   - api-runner-node.js:434 runAPI
11:58:29 PM:     [repo]/[gatsby]/src/utils/api-runner-node.js:434:22
11:58:29 PM:   
11:58:29 PM:   - api-runner-node.js:585 Promise.catch.decorateEvent.pluginName
11:58:29 PM:     [repo]/[gatsby]/src/utils/api-runner-node.js:585:13
11:58:29 PM:   
11:58:29 PM:   - debuggability.js:384 Promise._execute
11:58:29 PM:     [repo]/[bluebird]/js/release/debuggability.js:384:9
11:58:29 PM:   
11:58:29 PM:   - promise.js:518 Promise._resolveFromExecutor
11:58:29 PM:     [repo]/[bluebird]/js/release/promise.js:518:18
11:58:29 PM:   
11:58:29 PM:   - promise.js:103 new Promise
11:58:29 PM:     [repo]/[bluebird]/js/release/promise.js:103:10
11:58:29 PM:   
11:58:29 PM:   - api-runner-node.js:583 
11:58:29 PM:     [repo]/[gatsby]/src/utils/api-runner-node.js:583:16
11:58:29 PM:   
11:58:29 PM:   - util.js:16 tryCatcher
11:58:29 PM:     [repo]/[bluebird]/js/release/util.js:16:23
11:58:29 PM:   
11:58:29 PM:   - reduce.js:166 Object.gotValue
11:58:29 PM:     [repo]/[bluebird]/js/release/reduce.js:166:18
11:58:29 PM:   
11:58:29 PM:   - reduce.js:155 Object.gotAccum
11:58:29 PM:     [repo]/[bluebird]/js/release/reduce.js:155:25
11:58:29 PM:   
11:58:29 PM:   - util.js:16 Object.tryCatcher
11:58:29 PM:     [repo]/[bluebird]/js/release/util.js:16:23
11:58:29 PM:   
11:58:29 PM: 
11:58:29 PM: not finished onPostBuild - 0.166s
11:58:29 PM: not finished index to Algolia - 0.138s
11:58:29 PM: ​
11:58:29 PM: ────────────────────────────────────────────────────────────────
11:58:29 PM:   "build.command" failed                                        
11:58:29 PM: ────────────────────────────────────────────────────────────────
11:58:29 PM: ​
11:58:29 PM:   Error message
11:58:29 PM:   Command failed with exit code 1: gatsby build
11:58:29 PM: ​
11:58:29 PM:   Error location
11:58:29 PM:   In Build command from Netlify app:
11:58:29 PM:   gatsby build
11:58:29 PM: ​
11:58:29 PM:   Resolved config
11:58:29 PM:   build:
11:58:29 PM:     command: gatsby build
11:58:29 PM:     commandOrigin: ui
11:58:29 PM:     environment:
11:58:29 PM:       - REVIEW_ID
11:58:29 PM:     publish: /opt/build/repo/public
11:58:30 PM: Caching artifacts

from gatsby-plugin-algolia.

Isaac-Tait avatar Isaac-Tait commented on May 24, 2024

If you are building with Gatsby @Kn99HN I had the same error when I prepended the .env variables with GATSBY_. When I removed it the error cleared up... If it may be helpful, I blogged about it here.

from gatsby-plugin-algolia.

Related Issues (20)

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.