NO SOUND AFTER ENCODE!! about ifme HOT 19 CLOSED

can you try with 5.1.9?
I tell IFME, found any Windows Media format, will be force to AAC even set to pass-through.

from ifme.

Just checked 5.1.9 with following settings
http://grab.by/Mk2C
File has no sound.

from ifme.

if WMA audio, I test using bundled files that ship with windows, is there...

can you run:
ffmpeg -i file.wmv 2> video_data.txt

let me know what inside

from ifme.

if I run this command sound in output file works:

ffmpeg -i t.wmv tt.wmv 2> data.txt

ffmpeg version N-75275-gd13a2df Copyright (c) 2000-2015 the FFmpeg developers
built with gcc 4.9.3 (GCC)
configuration: --disable-static --enable-shared --enable-gpl --enable-version3 --disable-w32threads --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libdcadec --enable-libfreetype --enable-libgme --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-lzma --enable-decklink --enable-zlib
libavutil 55. 2.100 / 55. 2.100
libavcodec 57. 1.100 / 57. 1.100
libavformat 57. 0.100 / 57. 0.100
libavdevice 57. 0.100 / 57. 0.100
libavfilter 6. 3.100 / 6. 3.100
libswscale 4. 0.100 / 4. 0.100
libswresample 2. 0.100 / 2. 0.100
libpostproc 54. 0.100 / 54. 0.100
[wmv3 @ 000000000061b200] Extra data: 8 bits left, value: 0
Guessed Channel Layout for Input Stream #0.1 : mono
Input #0, asf, from 't.wmv':
Metadata:
WM/ToolName : Machete 4.1
WMFSDKVersion : 12.0.7601.17514
WMFSDKNeeded : 0.0.0.0000
IsVBR : 0
DeviceConformanceTemplate: L2
Duration: 00:00:24.02, start: 0.000000, bitrate: 3159 kb/s
Stream #0:0(pol): Video: wmv3 (Main) (WMV3 / 0x33564D57), yuv420p, 960x540, 3112 kb/s, 25 fps, 25 tbr, 1k tbn, 1k tbc
Stream #0:1(pol): Audio: wmav2 (a[1][0][0] / 0x0161), 22050 Hz, 1 channels, fltp, 16 kb/s
[wmv3 @ 000000000061c9e0] Extra data: 8 bits left, value: 0
Output #0, asf, to 'tt.wmv':
Metadata:
WM/ToolName : Machete 4.1
WMFSDKVersion : 12.0.7601.17514
WMFSDKNeeded : 0.0.0.0000
IsVBR : 0
DeviceConformanceTemplate: L2
WM/EncodingSettings: Lavf57.0.100
Stream #0:0(pol): Video: msmpeg4v3 (msmpeg4) (MP43 / 0x3334504D), yuv420p, 960x540, q=2-31, 200 kb/s, 25 fps, 1k tbn, 25 tbc
Metadata:
encoder : Lavc57.1.100 msmpeg4
Stream #0:1(pol): Audio: wmav2 (a[1][0][0] / 0x0161), 22050 Hz, mono, fltp, 128 kb/s
Metadata:
encoder : Lavc57.1.100 wmav2
Stream mapping:
Stream #0:0 -> #0:0 (wmv3 (native) -> msmpeg4v3 (msmpeg4))
Stream #0:1 -> #0:1 (wmav2 (native) -> wmav2 (native))
Press [q] to stop, [?] for help
frame= 100 fps=0.0 q=31.0 size= 626kB time=00:00:04.14 bitrate=1235.9kbits/s
frame= 202 fps=201 q=31.0 size= 1117kB time=00:00:08.14 bitrate=1123.3kbits/s
frame= 299 fps=198 q=31.0 size= 1610kB time=00:00:12.04 bitrate=1095.2kbits/s
frame= 407 fps=202 q=31.0 size= 2038kB time=00:00:16.55 bitrate=1009.0kbits/s
frame= 511 fps=203 q=31.0 size= 2545kB time=00:00:20.45 bitrate=1019.3kbits/s
frame= 600 fps=203 q=31.0 Lsize= 2964kB time=00:00:24.00 bitrate=1011.6kbits/s
video:2499kB audio:374kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 3.146681%

from ifme.

Sorry man but I lost too much time already on bugs in version 5. I'm returning to v4, it worked better.
No I cant even convert WMV with sound, Passthrough option doesn't work either.
Hope you'll test version 5 thoroughly and then I can switch to it.

from ifme.

I guess problem with encoding audio lies in Bit Rate/Level - If I set it to 192 there is no sound, but at 128 sound is back, but I want higher sound quality than 128...
Have you tried Freeware Advanced Audio Coder on different bitrates ? For me it works only with 128

from ifme.

• it's because version 4 and 5 work differently...
• Audio bit-rate, you need to know that your file is 16kbps increasing makes no different

This data from Windows 7 bundled video, the Audio Id is same wmav2 (a[1][0][0] / 0x0161)

ffprobe version N-75275-gd13a2df Copyright (c) 2007-2015 the FFmpeg developers
  built with gcc 4.9.3 (GCC)
  configuration: --disable-static --enable-shared --enable-gpl --enable-version3 --disable-w32threads --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libdcadec --enable-libfreetype --enable-libgme --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-lzma --enable-decklink --enable-zlib
  libavutil      55.  2.100 / 55.  2.100
  libavcodec     57.  1.100 / 57.  1.100
  libavformat    57.  0.100 / 57.  0.100
  libavdevice    57.  0.100 / 57.  0.100
  libavfilter     6.  3.100 /  6.  3.100
  libswscale      4.  0.100 /  4.  0.100
  libswresample   2.  0.100 /  2.  0.100
  libpostproc    54.  0.100 / 54.  0.100
Input #0, asf, from 'C:\Users\Public\Videos\Sample Videos\Wildlife.wmv':
  Metadata:
    SfOriginalFPS   : 299700
    WMFSDKVersion   : 11.0.6001.7000
    WMFSDKNeeded    : 0.0.0.0000
    comment         : Footage: Small World Productions, Inc; Tourism New Zealand | Producer: Gary F. Spradling | Music: Steve Ball
    title           : Wildlife in HD
    copyright       : © 2008 Microsoft Corporation
    IsVBR           : 0
    DeviceConformanceTemplate: AP@L3
  Duration: 00:00:30.09, start: 0.000000, bitrate: 6977 kb/s
    Stream #0:0(eng): Audio: wmav2 (a[1][0][0] / 0x0161), 44100 Hz, 2 channels, fltp, 192 kb/s
    Stream #0:1(eng): Video: vc1 (Advanced) (WVC1 / 0x31435657), yuv420p, 1280x720, 5942 kb/s, 29.97 fps, 29.97 tbr, 1k tbn, 1k tbc

from ifme.

I test many wmv files, all work just fine @_@
I had no idea which is not working~

from ifme.

make sure your file is not broken. in past i used to have similar issues with Mpeg and real player formats. i also needed to fix some avi files... when stream or ccontainer is broken these videos won't work. sometimes loading via directshow helps because with avisynth it handles input differently.

from ifme.

FFmpeg suppose able to read all kind of format, maybe use AviSynth to by pass FFmpeg

from ifme.

Trying 5.1.10

FLAC audio track is not copied after encode.

Fonts and chapters look in tact.

CLI only mentions audio track in ffmpeg input but nowhere else. it is not included in muxing or mapping later. Muxed output file has no audio track.

I will fall back to 5.1.9 and report again.

from ifme.

5.1.9:

Audio, chapters, sub and fonts are OK

These lines about flac didn't appear on 5.1.10 CLI but show on 5.1.9:

from ifme.

show me Audio Tab and temp folder

from ifme.

I don't know... I keep testing various format, this FLAC just work fine...

from ifme.

If got value at Audio Tab, means it's ok...

from ifme.

your screenshot shows v5.2, my problem was with 5.1.10. Actually 5.1.9 also copy flac with np.

from ifme.

Okay, I installed 5.1.11 and loaded queue. Then I opened temp folder. This time it is AAC sound but symptoms are the same. When I click start button, 5.1.9 extracts everything in into temp folder including an audio file. But 5.1.10 and 5.1.11 starts encoding video without an audio file in temp folder. Here are 2 screen-shots to compare. (Btw 5.1.9 shows track info in audio tab. I forgot to highlight in screen-shot. So problem is something else.)

from ifme.

I guess there is also "ASS" problem with 5.1.11 there but that is irrelevant now.

from ifme.

Take note that if you load queue file, is no longer valid, API is changed,
every version change, API is changed

from ifme.