Support for SR6 / HR6 about python-seabreeze HOT 5 CLOSED

Hi @tberezowski

Thank you for offering to contribute ❤️

Sadly there seem to be no developer datasheets publicly available anymore for the newer spectrometer models. But, if the SR6/HR6 use the same protocol as the ST, SR2, and SR4 it's possible that adding basic support is not too hard.

I recommend reading this issue: #185
And having a look at these PRs:

• #220
• #192
• #189

If you create a packet capture file .pcapng you can use this script: https://github.com/ap--/python-seabreeze/blob/main/dev/pretty_print_obp_pcapng.py to pretty print some of the USB communication for debugging.

Let me know if you need further information,
Andreas 😃

from python-seabreeze.

I am also trying to get SR6 support working. I was able to add two classes and udev rule as described in #220 which allowed me to read the spectrometer. However I just copied the SR4 classes and changed their names, and didn't change any of the device parameters.
I do not have an OceanView license unfortunately, is there another way I can pull the info you need?

from python-seabreeze.

@knaugh what I remember OceanView had some kind of a demo mode, but I am not sure if it is available in the recent version. Currently I havent start to work on this issue because my university is still in the process of buying the spectrometers... I should have them within one to two months and then I will post some update.

from python-seabreeze.

The demo version does not support the new spectrometers unfortunately, the demo is capped at 2.0.8 and the SR models need 2.0.12 as far as I can tell. I was able to get basic support working though, see PR #230

from python-seabreeze.

SR6 support available in v2.6.0

Thanks again everyone ❤️

from python-seabreeze.