low on remote doesn't work about ithowifi HOT 6 CLOSED

Ok, that is kinda strange... does changing the speed through the webinterface slider or API effectively change the speed to low?

from ithowifi.

Yes, everything else is working fine.

from ithowifi.

Debug level 2:

2021-04-09T18:00:31.813Z: RemoteID=116,216,207 / Command=timer3
Device type?: 22 - CMD: 142,34,243,3,99,0,30,168,127,255,118,115,205,167,132,239,51,175,245,201
2021-04-09T18:00:29.047Z: RemoteID=116,216,207 / Command=timer2
Device type?: 22 - CMD: 139,34,243,3,99,0,20,181,127,255,247,126,161,45,169,29,249,147,214,171
2021-04-09T18:00:26.154Z: RemoteID=116,216,207 / Command=timer1
Device type?: 22 - CMD: 137,34,243,3,99,0,10,193,127,255,186,142,97,51,104,132,236,19,238,12
2021-04-09T18:00:24.797Z: RemoteID=116,216,207 / Command=medium
Device type?: 22 - CMD: 136,34,241,3,99,3,4,199,127,255,187,142,252,235,183,6,206,51,44,200
2021-04-09T18:00:21.675Z: RemoteID=116,216,207 / Command=high
Device type?: 22 - CMD: 135,34,241,3,99,4,4,199,127,255,115,159,187,53,79,28,173,56,115,143
2021-04-09T17:58:42.754Z: RemoteID=116,216,207 / Command=low
Device type?: 22 - CMD: 134,34,241,3,99,2,4,202,127,255,57,248,187,253,15,8,250,72,68,164

2021-04-09T17:57:25.850Z: RemoteID=116,216,162 / Command=timer3
Device type?: 22 - CMD: 127,34,243,3,99,0,30,228,127,255,52,72,121,141,191,241,5,56,59,108
2021-04-09T17:57:25.114Z: RemoteID=116,216,162 / Command=timer2
Device type?: 22 - CMD: 126,34,243,3,99,0,20,239,127,255,191,152,199,14,23,90,21,214,0,191
2021-04-09T17:57:15.508Z: RemoteID=116,216,162 / Command=timer1
Device type?: 22 - CMD: 122,34,243,3,99,0,10,253,127,255,63,171,141,63,135,142,136,66,138,88
2021-04-09T17:56:56.769Z: RemoteID=116,216,162 / Command=medium
Device type?: 22 - CMD: 121,34,241,3,99,3,4,3,127,255,114,158,162,207,120,106,17,71,220,219
2021-04-09T17:56:52.914Z: RemoteID=116,216,162 / Command=high
Device type?: 22 - CMD: 120,34,241,3,99,4,4,3,127,255,49,253,173,92,238,225,121,114,247,17
2021-04-09T17:56:45.089Z: RemoteID=116,216,162 / Command=low
Device type?: 22 - CMD: 119,34,241,3,99,2,4,6,127,255,63,115,125,175,34,55,81,64,248,60

from ithowifi.

I'm really scratching my head here on this issue. The code that translates a remote command (low, med, high) to a speed setting on the itho unit is one and the same function.
Just to start of clean:

1. could you please install the just released rc2 firmware
2. on the debug page trigger a file system format
3. after completion reboot the add-on
4. do not setup anything yet but activate RF support, reboot and pair the remotes to the add-on
5. test if everything works or if there are still issues
6. if everything works setup wifi, mqtt etc. and test if it then still works

This way I can rule out config issues, something on the network influencing the result etc.

from ithowifi.

Hi Arjen,
That fixed the problem. Thanks for the help

from ithowifi.

Your welcome!

from ithowifi.