Advertising interval not honored about atc_mithermometer HOT 9 CLOSED

Ok thanks @atc1441 I'll keep an eye on it

Of 8 sensors, an average value of 80% in two weeks. It may be the expected normal battery discharge.

from atc_mithermometer.

Hi,

currently the advertising is limited to 3 minutes maximum but should work for 1 minute fine.

also it does notify when a change greater than 0.5°C or 5% data is happening then it does notify instantly, you can change that behavior with the web flasher.

from atc_mithermometer.

Hello @atc1441 so setting to 10s does not work correct? I also tried to set FC01 to notify at 0.1ºC change, but does not seems to work!

Tks

from atc_mithermometer.

Hey. Both thinks should work fine

from atc_mithermometer.

I'm using esphome to grab the changes. I do it with "Mi Like", the 10s passes and no update, also I blow hot air to the sensor, I see the value changing in the lcd, but no report.

Thank You

from atc_mithermometer.

It is possible that esphome has it blocking for faster updates?!

from atc_mithermometer.

mmc only advertises every 10min but multiple times shortly

try with platform xiaomi_cgg1

from atc_mithermometer.

Hi,

currently the advertising is limited to 3 minutes maximum but should work for 1 minute fine.

also it does notify when a change greater than 0.5°C or 5% data is happening then it does notify instantly, you can change that behavior with the web flasher.

@atc1441 Is it possible to increase the Advertising interval above 3 minutes?. The battery is draining fast. Using the FEFF command wouldn't be useful, would it?

Thanks for your amazing work !!

from atc_mithermometer.

The battery should not drain faster, it is doing the same thing even with short interval.

in general the battery is shown lower as it is as 100% is 3.1V and not 3.0V in my firmware to see how much overhand there is

from atc_mithermometer.