Changing M365 firmware issue about m365_dashboard HOT 6 CLOSED

I have only basics of Arduino, but after first check the code, seems easy to implement. I will try to add that feature and post the result. If throttle > 150 at startup, dissable the UART and enter into infinite loop until next repowering.

from m365_dashboard.

I have done it in my branch: NetBUG@f4529d9
One thing is that I made a special PCB instead of tiny Arduino + dedicated screen, so the pin mapping for the display differs from the original one by @augisbud.

I have a button and an LED on the board, so the previous commit adds the code to handle button press.

from m365_dashboard.

Nice, but what about to use a new menu item for that or maybe a booting test... IE: if arduino boots with the throttle pushed set the UART pins as inputs (hi impedance state) and goto sleep until next reboot?

from m365_dashboard.

Done. Seems to works fine:
#50

from m365_dashboard.

merged

from m365_dashboard.

Now that I have a switch? :)
You guys are great,Thanks

from m365_dashboard.