Comments (9)
mcuee
commented on August 20, 2024
The problem seems to be related to the detection of libusb-1.0 which causes issue with libftdi.
-- DON'T HAVE libusb_1_0
from avrdude.
mcuee
commented on August 20, 2024
I will try out DragonFly BSD 6.4 version later.
Anyway, this should not block avrdude 7.3 release.
from avrdude.
mcuee
commented on August 20, 2024
Dragon BSD 6.2.2 comes with avrdude 7.0. It does not seem to support HIDAPI. And of course there is no libserialport support in avrdude 7.0 version.
mcuee@dragonfly622vm:~ % avrdude
Usage: avrdude [options]
Options:
-p <partno> Required. Specify AVR device.
-b <baudrate> Override RS-232 baud rate.
-B <bitclock> Specify JTAG/STK500v2 bit clock period (us).
-C <config-file> Specify location of configuration file.
-c <programmer> Specify programmer type.
-D Disable auto erase for flash memory
-i <delay> ISP Clock Delay [in microseconds]
-P <port> Specify connection port.
-F Override invalid signature check.
-e Perform a chip erase.
-O Perform RC oscillator calibration (see AVR053).
-U <memtype>:r|w|v:<filename>[:format]
Memory operation specification.
Multiple -U options are allowed, each request
is performed in the order specified.
-n Do not write anything to the device.
-V Do not verify.
-t Enter terminal mode.
-E <exitspec>[,<exitspec>] List programmer exit specifications.
-x <extended_param> Pass <extended_param> to programmer.
-v Verbose output. -v -v for more.
-q Quell progress output. -q -q for less.
-l logfile Use logfile rather than stderr for diagnostics.
-? Display this usage.
avrdude version 7.0, URL: <https://github.com/avrdudes/avrdude>
mcuee@dragonfly622vm:~ % ldd /usr/local/bin/avrdude
/usr/local/bin/avrdude:
libm.so.4 => /lib/libm.so.4 (0x8006cf000)
libusb.so.2 => /usr/lib/libusb.so.2 (0x8008fa000)
libftdi1.so.2 => /usr/local/lib/libftdi1.so.2 (0x8004c2000)
libreadline.so.8 => /usr/local/lib/libreadline.so.8 (0x8004d0000)
libc.so.8 => /lib/libc.so.8 (0x800b0c000)
libpthread.so.0 => /usr/lib/libpthread.so.0 (0x800e69000)
libncurses.so.6 => /usr/local/lib/libncurses.so.6 (0x800527000)
libtinfo.so.6 => /usr/local/lib/libtinfo.so.6 (0x800562000)
from avrdude.
mcuee
commented on August 20, 2024
Interestingly I have no issues building avrdude git main under DragonFly BSD 6.4 version (latest release). However the version does not seem to be correct. I will try again later.
libftdi support wil still not work due to the detection issue of libusb-1.0.
mcuee@dragonflybsdvm:~/build/avrdude % ./build.sh
-- The C compiler identification is GNU 8.3.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found Git: /usr/local/bin/git (found version "2.41.0")
-- Found FLEX: /usr/bin/flex (found version "2.6.4")
-- Found BISON: /usr/local/bin/bison (found version "3.8.2")
-- Looking for libelf.h
-- Looking for libelf.h - not found
-- Looking for libelf/libelf.h
-- Looking for libelf/libelf.h - not found
-- Looking for usb.h
-- Looking for usb.h - found
-- Looking for lusb0_usb.h
-- Looking for lusb0_usb.h - not found
-- Looking for libusb.h
-- Looking for libusb.h - found
-- Looking for libusb-1.0/libusb.h
-- Looking for libusb-1.0/libusb.h - not found
-- Looking for hidapi/hidapi.h
-- Looking for hidapi/hidapi.h - not found
-- Looking for ftdi_tcioflush
-- Looking for ftdi_tcioflush - not found
-- Configuration summary:
-- ----------------------
-- DO HAVE libelf
-- DO HAVE libusb
-- DON'T HAVE libusb_1_0
-- DO HAVE libhidapi
-- DO HAVE libftdi (but prefer to use libftdi1)
-- DO HAVE libftdi1
-- DO HAVE libreadline
-- DO HAVE libserialport
-- DISABLED doc
-- DISABLED parport
-- DISABLED linuxgpio
-- DISABLED linuxspi
-- ----------------------
-- Configuring done (0.8s)
-- Generating done (0.0s)
-- Build files have been written to: /home/mcuee/build/avrdude/build_dragonfly
[ 1%] Generating avrdude.conf
[ 1%] Built target conf
[ 2%] [FLEX][Parser] Building scanner with flex 2.6.4
[ 3%] [BISON][Parser] Building parser with bison 3.8.2
[ 5%] Building C object src/CMakeFiles/libavrdude.dir/arduino.c.o
[ 6%] Building C object src/CMakeFiles/libavrdude.dir/avr.c.o
[ 7%] Building C object src/CMakeFiles/libavrdude.dir/avr910.c.o
[ 9%] Building C object src/CMakeFiles/libavrdude.dir/avrcache.c.o
[ 10%] Building C object src/CMakeFiles/libavrdude.dir/avrftdi.c.o
In file included from /home/mcuee/build/avrdude/src/avrftdi.c:42:
/home/mcuee/build/avrdude/src/avrftdi_private.h:22:2: warning: #warning No libftdi or libusb support. Install libftdi1/libusb-1.0 or libftdi/libusb and run configure/make again. [-Wcpp]
#warning No libftdi or libusb support. Install libftdi1/libusb-1.0 or libftdi/libusb and run configure/make again.
^~~~~~~
[ 11%] Building C object src/CMakeFiles/libavrdude.dir/avrftdi_tpi.c.o
In file included from /home/mcuee/build/avrdude/src/avrftdi_tpi.c:14:
/home/mcuee/build/avrdude/src/avrftdi_private.h:22:2: warning: #warning No libftdi or libusb support. Install libftdi1/libusb-1.0 or libftdi/libusb and run configure/make again. [-Wcpp]
#warning No libftdi or libusb support. Install libftdi1/libusb-1.0 or libftdi/libusb and run configure/make again.
^~~~~~~
[ 13%] Building C object src/CMakeFiles/libavrdude.dir/avrintel.c.o
[ 14%] Building C object src/CMakeFiles/libavrdude.dir/avrpart.c.o
[ 15%] Building C object src/CMakeFiles/libavrdude.dir/bitbang.c.o
[ 17%] Building C object src/CMakeFiles/libavrdude.dir/buspirate.c.o
[ 18%] Building C object src/CMakeFiles/libavrdude.dir/butterfly.c.o
[ 19%] Building C object src/CMakeFiles/libavrdude.dir/ch341a.c.o
[ 21%] Building C object src/CMakeFiles/libavrdude.dir/config.c.o
[ 22%] Building C object src/CMakeFiles/libavrdude.dir/confwin.c.o
[ 23%] Building C object src/CMakeFiles/libavrdude.dir/crc16.c.o
[ 25%] Building C object src/CMakeFiles/libavrdude.dir/dfu.c.o
[ 26%] Building C object src/CMakeFiles/libavrdude.dir/dryrun.c.o
[ 27%] Building C object src/CMakeFiles/libavrdude.dir/fileio.c.o
[ 28%] Building C object src/CMakeFiles/libavrdude.dir/flip1.c.o
[ 30%] Building C object src/CMakeFiles/libavrdude.dir/flip2.c.o
[ 31%] Building C object src/CMakeFiles/libavrdude.dir/ft245r.c.o
/home/mcuee/build/avrdude/src/ft245r.c:89:2: warning: #warning No libftdi or libusb support. Install libftdi1/libusb-1.0 or libftdi/libusb and run configure/make again. [-Wcpp]
#warning No libftdi or libusb support. Install libftdi1/libusb-1.0 or libftdi/libusb and run configure/make again.
^~~~~~~
[ 32%] Building C object src/CMakeFiles/libavrdude.dir/jtagmkI.c.o
[ 34%] Building C object src/CMakeFiles/libavrdude.dir/jtagmkII.c.o
[ 35%] Building C object src/CMakeFiles/libavrdude.dir/jtag3.c.o
[ 36%] Building C object src/CMakeFiles/libavrdude.dir/leds.c.o
[ 38%] Building C object src/CMakeFiles/libavrdude.dir/linuxgpio.c.o
[ 39%] Building C object src/CMakeFiles/libavrdude.dir/linuxspi.c.o
[ 40%] Building C object src/CMakeFiles/libavrdude.dir/lists.c.o
[ 42%] Building C object src/CMakeFiles/libavrdude.dir/micronucleus.c.o
[ 43%] Building C object src/CMakeFiles/libavrdude.dir/par.c.o
[ 44%] Building C object src/CMakeFiles/libavrdude.dir/pgm.c.o
[ 46%] Building C object src/CMakeFiles/libavrdude.dir/pgm_type.c.o
[ 47%] Building C object src/CMakeFiles/libavrdude.dir/pickit2.c.o
[ 48%] Building C object src/CMakeFiles/libavrdude.dir/pindefs.c.o
[ 50%] Building C object src/CMakeFiles/libavrdude.dir/ppi.c.o
[ 51%] Building C object src/CMakeFiles/libavrdude.dir/ppiwin.c.o
[ 52%] Building C object src/CMakeFiles/libavrdude.dir/serbb_posix.c.o
[ 53%] Building C object src/CMakeFiles/libavrdude.dir/serbb_win32.c.o
[ 55%] Building C object src/CMakeFiles/libavrdude.dir/ser_avrdoper.c.o
[ 56%] Building C object src/CMakeFiles/libavrdude.dir/ser_posix.c.o
[ 57%] Building C object src/CMakeFiles/libavrdude.dir/ser_win32.c.o
[ 59%] Building C object src/CMakeFiles/libavrdude.dir/serialadapter.c.o
[ 60%] Building C object src/CMakeFiles/libavrdude.dir/serialupdi.c.o
[ 61%] Building C object src/CMakeFiles/libavrdude.dir/stk500.c.o
[ 63%] Building C object src/CMakeFiles/libavrdude.dir/stk500v2.c.o
[ 64%] Building C object src/CMakeFiles/libavrdude.dir/stk500generic.c.o
[ 65%] Building C object src/CMakeFiles/libavrdude.dir/strutil.c.o
[ 67%] Building C object src/CMakeFiles/libavrdude.dir/teensy.c.o
[ 68%] Building C object src/CMakeFiles/libavrdude.dir/term.c.o
[ 69%] Building C object src/CMakeFiles/libavrdude.dir/updi_link.c.o
[ 71%] Building C object src/CMakeFiles/libavrdude.dir/updi_nvm.c.o
[ 72%] Building C object src/CMakeFiles/libavrdude.dir/updi_nvm_v0.c.o
[ 73%] Building C object src/CMakeFiles/libavrdude.dir/updi_nvm_v2.c.o
[ 75%] Building C object src/CMakeFiles/libavrdude.dir/updi_nvm_v3.c.o
[ 76%] Building C object src/CMakeFiles/libavrdude.dir/updi_nvm_v4.c.o
[ 77%] Building C object src/CMakeFiles/libavrdude.dir/updi_nvm_v5.c.o
[ 78%] Building C object src/CMakeFiles/libavrdude.dir/updi_readwrite.c.o
[ 80%] Building C object src/CMakeFiles/libavrdude.dir/updi_state.c.o
[ 81%] Building C object src/CMakeFiles/libavrdude.dir/urclock.c.o
[ 82%] Building C object src/CMakeFiles/libavrdude.dir/usbasp.c.o
[ 84%] Building C object src/CMakeFiles/libavrdude.dir/usb_hidapi.c.o
[ 85%] Building C object src/CMakeFiles/libavrdude.dir/usb_libusb.c.o
[ 86%] Building C object src/CMakeFiles/libavrdude.dir/usbtiny.c.o
[ 88%] Building C object src/CMakeFiles/libavrdude.dir/update.c.o
[ 89%] Building C object src/CMakeFiles/libavrdude.dir/wiring.c.o
[ 90%] Building C object src/CMakeFiles/libavrdude.dir/xbee.c.o
[ 92%] Building C object src/CMakeFiles/libavrdude.dir/__/lexer.c.o
[ 93%] Building C object src/CMakeFiles/libavrdude.dir/__/config_gram.c.o
[ 94%] Linking C static library libavrdude.a
[ 94%] Built target libavrdude
[ 96%] Building C object src/CMakeFiles/avrdude.dir/main.c.o
[ 97%] Building C object src/CMakeFiles/avrdude.dir/developer_opts.c.o
[ 98%] Building C object src/CMakeFiles/avrdude.dir/whereami.c.o
[100%] Linking C executable avrdude
[100%] Built target avrdude
Build succeeded.
Run
sudo cmake --build build_dragonfly --target install
to install.
mcuee@dragonflybsdvm:~/build/avrdude % git diff
mcuee@dragonflybsdvm:~/build/avrdude % sudo cmake --build build_dragonfly --target install
Password:
[ 1%] Built target conf
[ 94%] Built target libavrdude
[100%] Built target avrdude
Install the project...
-- Install configuration: "RelWithDebInfo"
-- Installing: /usr/local/bin/avrdude
-- Set runtime path of "/usr/local/bin/avrdude" to ""
-- Installing: /usr/local/lib/libavrdude.a
-- Installing: /usr/local/include/libavrdude.h
-- Installing: /usr/local/etc/avrdude.conf
-- Installing: /usr/local/share/man/man1/avrdude.1
mcuee@dragonflybsdvm:~/build/avrdude % avrdude
Usage: avrdude [options]
Options:
-p <partno> Specify AVR device; -p ? lists all known parts
-p <wildcard>/<flags> Run developer options for matched AVR devices,
e.g., -p ATmega328P/s or /S for part definition
-b <baudrate> Override RS-232 baud rate
-B <bitclock> Specify bit clock period (us)
-C <config-file> Specify location of configuration file
-C +<config-file> Specify additional config file, can be repeated
-N Do not load config file
-c <programmer> Specify programmer; -c ? and -c ?type list all
-c <wildcard>/<flags> Run developer options for matched programmers,
e.g., -c 'ur*'/s for programmer info/definition
-A Disable trailing-0xff removal for file/AVR read
-D Disable auto erase for flash memory; implies -A
-i <delay> ISP Clock Delay [in microseconds]
-P <port> Connection; -P ?s or -P ?sa lists serial ones
-r Reconnect to -P port after "touching" it; wait
400 ms for each -r; needed for some USB boards
-F Override invalid signature or initial checks
-e Perform a chip erase
-O Perform RC oscillator calibration (see AVR053)
-t Run an interactive terminal when it is its turn
-T <terminal cmd line> Run terminal line when it is its turn
-U <memstr>:r|w|v:<filename>[:format]
Carry out memory operation when it is its turn
Multiple -t, -T and -U options can be specified
-n Do not write to the device whilst processing -U
-V Do not automatically verify during -U
-E <exitsp>[,<exitsp>] List programmer exit specifications
-x <extended_param> Pass <extended_param> to programmer, see -xhelp
-v Verbose output; -v -v for more
-q Quell progress output; -q -q for less
-l logfile Use logfile rather than stderr for diagnostics
-? Display this usage
avrdude version 7.2-20230720, https://github.com/avrdudes/avrdude
mcuee@dragonflybsdvm:~/build/avrdude % head /usr/local/etc/avrdude.conf
# $Id$ -*- text -*-
#
# AVRDUDE Configuration File
#
avrdude_conf_version = "7.2-20240201 (571a8063)";
# This file contains AVRDUDE's default configuration data describing
# programming hardware pinouts and part definitions. Normally, it
# requires AVRDUDE be of the same or higher version than above string
from avrdude.
mcuee
commented on August 20, 2024
Hmm, I can not get it build with a fresh git checkout.
mcuee@dragonflybsdvm:~/build % git clone https://github.com/avrdudes/avrdude.git
Cloning into 'avrdude'...
remote: Enumerating objects: 19848, done.
remote: Counting objects: 100% (343/343), done.
remote: Compressing objects: 100% (187/187), done.
remote: Total 19848 (delta 182), reused 302 (delta 154), pack-reused 19505
Receiving objects: 100% (19848/19848), 11.59 MiB | 15.14 MiB/s, done.
Resolving deltas: 100% (14307/14307), done.
mcuee@dragonflybsdvm:~/build % cd avrdude
mcuee@dragonflybsdvm:~/build/avrdude % ./build.sh
-- The C compiler identification is GNU 8.3.0
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: /usr/bin/cc - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Found Git: /usr/local/bin/git (found version "2.41.0")
-- Found FLEX: /usr/bin/flex (found version "2.6.4")
-- Found BISON: /usr/local/bin/bison (found version "3.8.2")
-- Looking for libelf.h
-- Looking for libelf.h - not found
-- Looking for libelf/libelf.h
-- Looking for libelf/libelf.h - not found
-- Looking for usb.h
-- Looking for usb.h - found
-- Looking for lusb0_usb.h
-- Looking for lusb0_usb.h - not found
-- Looking for libusb.h
-- Looking for libusb.h - found
-- Looking for libusb-1.0/libusb.h
-- Looking for libusb-1.0/libusb.h - not found
-- Looking for hidapi/hidapi.h
-- Looking for hidapi/hidapi.h - not found
-- Looking for ftdi_tcioflush
-- Looking for ftdi_tcioflush - not found
-- Configuration summary:
-- ----------------------
-- DO HAVE libelf
-- DO HAVE libusb
-- DON'T HAVE libusb_1_0
-- DO HAVE libhidapi
-- DO HAVE libftdi (but prefer to use libftdi1)
-- DO HAVE libftdi1
-- DO HAVE libreadline
-- DO HAVE libserialport
-- DISABLED doc
-- DISABLED parport
-- DISABLED linuxgpio
-- DISABLED linuxspi
-- ----------------------
-- Configuring done (0.7s)
-- Generating done (0.0s)
-- Build files have been written to: /home/mcuee/build/avrdude/build_dragonfly
[ 1%] Generating avrdude.conf
[ 1%] Built target conf
[ 2%] [FLEX][Parser] Building scanner with flex 2.6.4
[ 3%] [BISON][Parser] Building parser with bison 3.8.2
[ 5%] Building C object src/CMakeFiles/libavrdude.dir/arduino.c.o
[ 6%] Building C object src/CMakeFiles/libavrdude.dir/avr.c.o
[ 7%] Building C object src/CMakeFiles/libavrdude.dir/avr910.c.o
[ 9%] Building C object src/CMakeFiles/libavrdude.dir/avrcache.c.o
[ 10%] Building C object src/CMakeFiles/libavrdude.dir/avrftdi.c.o
In file included from /home/mcuee/build/avrdude/src/avrftdi.c:42:
/home/mcuee/build/avrdude/src/avrftdi_private.h:16:10: fatal error: ftdi.h: No such file or directory
#include <ftdi.h>
^~~~~~~~
compilation terminated.
gmake[2]: *** [src/CMakeFiles/libavrdude.dir/build.make:143: src/CMakeFiles/libavrdude.dir/avrftdi.c.o] Error 1
gmake[1]: *** [CMakeFiles/Makefile2:128: src/CMakeFiles/libavrdude.dir/all] Error 2
gmake: *** [Makefile:136: all] Error 2
Build failed.
Applying the following patch does not help.
mcuee@dragonflybsdvm:~/build/avrdude % git diff
diff --git a/CMakeLists.txt b/CMakeLists.txt
index bde9304b..58735422 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -163,7 +163,7 @@ if(HAVE_LIBUSB_1_0)
endif()
# FreeBSD's library 'libusb' supports both the libusb-0.1 and libusb-1.0 API.
-if (HAVE_LIBUSB AND CMAKE_SYSTEM_NAME STREQUAL "FreeBSD")
+if (HAVE_LIBUSB AND CMAKE_SYSTEM_NAME STREQUAL "FreeBSD|DragonFly")
set(HAVE_LIBUSB_1_0 ${HAVE_LIBUSB})
endif()
from avrdude.
mcuee
commented on August 20, 2024
@stefanrueger and @MCUdude
#1656 (comment)
You can see that I have produce an avrdude executable with the version listed as avrdude version 7.2-20230720 but the version of avrdude.conf is correct. This time it is under DragonFly BSD.
I have ecountered same issue with MSYS2 mingw64 build but I can always sorted out the issue by deleting the git repo and carry out the building process again.
This time it is different as I can not build with a fresh checkout. Strange.
from avrdude.
mcuee
commented on August 20, 2024
Assuming the successful build is correct, it does not seem to work well with the tests. So maybe there are deeper problems.
mcuee@dragonflybsdvm:~/build/avrdude/tools % ldd /usr/local/bin/avrdude
/usr/local/bin/avrdude:
libm.so.4 => /lib/libm.so.4 (0x8008a5000)
libelf.so.0 => /usr/local/lib/libelf.so.0 (0x800698000)
libusb.so.2 => /usr/lib/libusb.so.2 (0x800ad0000)
libhidapi.so.0 => /usr/local/lib/libhidapi.so.0 (0x8006ad000)
libftdi.so.1 => /usr/local/lib/libftdi.so.1 (0x8006b6000)
libftdi1.so.2 => /usr/local/lib/libftdi1.so.2 (0x8006bd000)
libreadline.so.8 => /usr/local/lib/libreadline.so.8 (0x8006cb000)
libserialport.so.0 => /usr/local/lib/libserialport.so.0 (0x800723000)
libncurses.so.6 => /usr/local/lib/libncurses.so.6 (0x800730000)
libc.so.8 => /lib/libc.so.8 (0x800ce2000)
libintl.so.8 => /usr/local/lib/libintl.so.8 (0x80076b000)
libpthread.so.0 => /usr/lib/libpthread.so.0 (0x801040000)
libiconv.so.2 => /usr/local/lib/libiconv.so.2 (0x800780000)
libtinfo.so.6 => /usr/local/lib/libtinfo.so.6 (0x80125a000)
mcuee@dragonflybsdvm:~/build/avrdude/tools % head /usr/local/etc/avrdude.conf
# $Id$ -*- text -*-
#
# AVRDUDE Configuration File
#
avrdude_conf_version = "7.2-20240201 (571a8063)";
# This file contains AVRDUDE's default configuration data describing
# programming hardware pinouts and part definitions. Normally, it
# requires AVRDUDE be of the same or higher version than above string.
mcuee@dragonflybsdvm:~/build/avrdude/tools % ./test-avrdude -p "-c dryrun -p m4809"
Testing avrdude version 7.2-20230720
Prepare "-c dryrun -p m4809" and press 'enter' or 'space' to continue. Press any other key to skip
❌ 0.102 s: fuse access: clear, set and read eesave fuse bit (failed command below)
$ avrdude -qq -c dryrun -p m4809 -l /tmp/test-avrdude.log.WAsCVF -T "config eesave=0; config eesave=1; config eesave"
❌ 0.100 s: fuse access: set eesave fusebit to delete EEPROM on chip erase (failed command below)
$ avrdude -qq -c dryrun -p m4809 -l /tmp/test-avrdude.log.WAsCVF -T "config eesave=ee*erased"
✅ 0.105 s: chip erase
✅ 0.103 s: flash -U write/verify holes_rjmp_loops_49152B.hex
❌ 0.105 s: flash -T write/verify holes_rjmp_loops_49152B.hex (failed command below)
$ avrdude -qq -c dryrun -p m4809 -l /tmp/test-avrdude.log.WAsCVF -T "write flash ./test_files/holes_rjmp_loops_49152B.hex:a"
❌ 0.117 s: flash -T write/verify rjmp_loops_for_bootloaders_49152B.hex (failed command below)
$ avrdude -qq -c dryrun -p m4809 -l /tmp/test-avrdude.log.WAsCVF -T "write flash ./test_files/rjmp_loops_for_bootloaders_49152B.hex:a"
✅ 0.096 s: eeprom check whether programmer can flip 0s to 1s
✅ 0.102 s: eeprom -U write/verify holes_pack_my_box_256B.hex
❌ 0.097 s: eeprom -T write/verify holes_{the_five_boxing_wizards,pack_my_box}_256B.hex (failed command below)
$ avrdude -qq -c dryrun -p m4809 -l /tmp/test-avrdude.log.WAsCVF -T "write eeprom ./test_files/holes_the_five_boxing_wizards_256B.hex:a" -T flush -T "write eeprom ./test_files/holes_pack_my_box_256B.hex:a"
❌ 0.101 s: eeprom -T write/verify lorem_ipsum_256B.srec (failed command below)
$ avrdude -qq -c dryrun -p m4809 -l /tmp/test-avrdude.log.WAsCVF -T "write eeprom ./test_files/lorem_ipsum_256B.srec:a"
✅ 0.111 s: chip erase and spot check flash is actually erased
✅ 0.116 s: spot check eeprom is erased, too
❌ 0.117 s: usersig -T/-U write/read random_data_64B.bin (failed command below)
$ avrdude -qq -c dryrun -p m4809 -l /tmp/test-avrdude.log.WAsCVF -T "erase usersig; write usersig ./test_files/random_data_64B.bin" -T flush -U usersig:r:/tmp/test-avrdude.tmp.L8gokN:r -U usersig:v:/tmp/test-avrdude.tmp.L8gokN:r -T "erase usersig" -T flush -U usersig:v:./test_files/0xff_64B.hex:i
One or more AVRDUDE "-c dryrun -p m4809" tests failed. Do you want to retry this particular test? (y/n): n
from avrdude.
mcuee
commented on August 20, 2024
BTW, DragonFly BSD 6.4 has avrdude 7.1, it does not support hidapi and libserialport.
mcuee@dragonflybsdvm:~/build/avrdude_bin % ldd ./avrdude71
./avrdude71:
libm.so.4 => /lib/libm.so.4 (0x80071b000)
libusb.so.2 => /usr/lib/libusb.so.2 (0x800946000)
libftdi1.so.2 => /usr/local/lib/libftdi1.so.2 (0x80050e000)
libreadline.so.8 => /usr/local/lib/libreadline.so.8 (0x80051c000)
libc.so.8 => /lib/libc.so.8 (0x800b58000)
libpthread.so.0 => /usr/lib/libpthread.so.0 (0x800eb6000)
libncurses.so.6 => /usr/local/lib/libncurses.so.6 (0x800574000)
libtinfo.so.6 => /usr/local/lib/libtinfo.so.6 (0x8005af000)
from avrdude.
mcuee
commented on August 20, 2024
Move this to discussion for now. We may have to rely on people who are interested to help out.
from avrdude.
Related Issues (20)
- Add support for libgpiod v2+ API HOT 2
- "jtag2 is not a unique start of a programmer name"
- `-F` option not honored
- Add support for more AVR-DU parts HOT 2
- Add support for emscripten HOT 6
- Trouble with Raspberry pi 5 HOT 13
- linuxgpio sysfs fallback improvement to deal with shifted GPIO numbering in new kernel version HOT 1
- usbasp_write_byte in TPI mode; all writes have to be done at page level HOT 15
- cmake enabling LINUXGPIO on ubuntu 20.04 fails HOT 4
- arduino uno atmga328p HOT 2
- macOS github action failed. HOT 9
- CMake improvement -- using pkg-find to find the libraries HOT 1
- format mismatch warnings HOT 3
- Misleading error message: cannot find programmer id
- custom programmer broken in v7.3 HOT 4
- ATtiny11 does not have EEPROM
- Misleading error message when specifying wrong AVR-Ex part HOT 11
- Multi-memory files HOT 13
- AVRDUDE fails to return -1 on certain write byte errors
- UPDI with AtmelICE, how to? HOT 6
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from avrdude.