Additional item E1745 TRADFRI Motion Sensor about tradfri-hacking HOT 4 CLOSED

The Draco module is used in all new TRÅDFRI products. I have seen it in the new remote and in the signal repeater. When programming it there is no difference.

See also: https://wiki.iptables.dk/TR%C3%85DFRI_wall_switch#Extract_the_TR.C3.85DFRI_ZigBee_module

from tradfri-hacking.

Is it possible to change the code on the E1745 TRÅDFRI motion sensor to have it work with Philips Hue?

from tradfri-hacking.

It seems that this is the ICC-1-A module that I now have described in the README.md as well.

The only difference I found (so far), is that PF3 is now unavailable, and used to power the SPI NOR Flash.

from tradfri-hacking.

What component actually controls the time setting on the E1745? I'd love to flash a custom firmware on that thing with just a 2-5 second "ON" state when there's movement, not 3 minutes minimum. I've already added the sensor to my Zigbee2MQTT network and read data from it via Home Assistant but the 3 minute timer doesn't allow me to play around with it much.
I've taken one of the sensors apart but I doubt I have the required hardware to read the contents of the Zigbee module... Not a "hacker" myself in that regard, max. I got is a serial to USB adapter :P

from tradfri-hacking.