VM can't get IP on Grizzly Multinode about openstack-grizzly-install-guide HOT 4 CLOSED

Check if br-tun and br-int is up and running on both control/network and compute nodes.

From: mgilank [mailto:[email protected]]
Sent: Friday, June 21, 2013 3:22 AM
To: mseknibilel/OpenStack-Grizzly-Install-Guide
Subject: [OpenStack-Grizzly-Install-Guide] VM can't get IP on Grizzly Multinode (#86)

Hi, i am new in this

Have setup multinode, and vm can build from dashboard, but dhcp from network node is not working, i have check with
#ps faux | grep dnsmasq
and it show that they are already inject into VM (am i right ?) like this

dnsmasq --no-hosts --no-resolv --strict-order --bind-interfaces --interface=tap1a8f1ea3-54 --except-interface=lo --pid-file=/var/lib/quantum/dhcp/5b4619d2-198b-453a-8ab6-b1c5545edb1f/pid --dhcp-hostsfile=/var/lib/quantum/dhcp/5b4619d2-198b-453a-8ab6-b1c5545edb1f/host --dhcp-optsfile=/var/lib/quantum/dhcp/5b4619d2-198b-453a-8ab6-b1c5545edb1f/opts --dhcp-script=/usr/bin/quantum-dhcp-agent-dnsmasq-lease-update --leasefile-ro --dhcp-range=set:tag0,10.10.30.0,static,120s --conf-file= --domain=openstacklocal

i am stuck at this, what can i check again? please give me some clue
thanks

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/86.

from openstack-grizzly-install-guide.

Hello, its solved, the problem is i used unmanaged switch to connect from network to compute node, then i put it to directly connect as it configure for p2p
but i've got another question, what if i add another compute node? does it must to tunnel like before? if i used switch, am i must configure it to vlan? as my switch is unmanaged.
Thanks

from openstack-grizzly-install-guide.

The instructions are for GRE mode, so the new compute node will also be configured in the same way. No vlan.

From: mgilank [mailto:[email protected]]
Sent: Sunday, June 23, 2013 7:33 PM
To: mseknibilel/OpenStack-Grizzly-Install-Guide
Cc: Gangur, Hrushikesh (HP Converged Cloud - R&D - Sunnyvale)
Subject: Re: [OpenStack-Grizzly-Install-Guide] VM can't get IP on Grizzly Multinode (#86)

Hello, its solved, the problem is i used unmanaged switch to connect from network to compute node, then i put it to directly connect as it configure for p2p
but i've got another question, what if i add another compute node? does it must to tunnel like before? if i used switch, am i must configure it to vlan? as my switch is unmanaged.
Thanks

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/86#issuecomment-19886411.

from openstack-grizzly-install-guide.

So, that's mean it will connected to network node, does it possible to use switch instead of direct connect to network node?

from openstack-grizzly-install-guide.