RGBW about esp-mqtt-json-digital-leds HOT 12 OPEN

I have the exact same question... But no answer...

from esp-mqtt-json-digital-leds.

FastLED does not support RGBW at this time. Hence no. RGBW will not be supported.

from esp-mqtt-json-digital-leds.

Seems that RGBW is possible now: FastLED/FastLED#482 (comment)

Anyone of you already used RGBW, yet?

from esp-mqtt-json-digital-leds.

Does anyone have RGBW working. I've tried using DotNetDann/ESP8266-MQTT-JSON-SK6812RGBW-HomeAssistant fork however I can't get it to work correctly. The switch in home assistant just doesn't work correctly

from esp-mqtt-json-digital-leds.

@Reflectin88 You should post an issue in DotNetDann's repo if that's the one you're using. My guess is you'll probably get better help there since he is more likely to respond there.

from esp-mqtt-json-digital-leds.

@Reflectin88 I just checked and noticed that he is not allowing issues on his fork. My mistake.

How is the switch in Home Assistant not working correctly?

from esp-mqtt-json-digital-leds.

So when I turn the switch off it turns the strip off however the switch after a couple of seconds changes back.

from esp-mqtt-json-digital-leds.

@pacobyte I have tested with bruh's code and it works however the colors are obviously wrong as im using a neo pixel rgbw ring

from esp-mqtt-json-digital-leds.

Finally worked it out, the off packet was larger then the max that pubsub could send

from esp-mqtt-json-digital-leds.

Would you please share the fix? Having the same issue.

Did you change MQTT_MAX_PACKET_SIZE ?

Regards

from esp-mqtt-json-digital-leds.

@kurniawan77 I have lost the code, I'm going to have a look at doing it again as I need the code and if I get it working ill post it here.

from esp-mqtt-json-digital-leds.

Did you already redo the code? I wanted to program a controller for my sk6812 rgbw neopixel ring and don't understand how to implement the warmwhite.

from esp-mqtt-json-digital-leds.