Compilation fatal error: pico/stdio.h: No such file or directory about picozoom HOT 5 CLOSED

Are you using this one?

This project doesn't use the official Arduino installation (the mbed one)

Installin through the Arduino IDE you'll have to choose this one

from picozoom.

Thanks for your answer. I tried both one and it does a similar problem on the stdio and stdlib libraries

from picozoom.

I tried several board and this was the last one I choose. But it keep the same error on both boards as I mentioned

from picozoom.

I reinstalled the environment and it seems that the error regarding the Adafruit Tiny USBLibrary. It looks that the custom library is conflicting with the RP2040 one.

Any idea how to solve it? Thanks!

E:\Users\Jungle Boy\Documents\Arduino\libraries\PicoZoom-main\src\beta\beta.ino: In function 'void poll_midi_host_rx()':
E:\Users\Jungle Boy\Documents\Arduino\libraries\PicoZoom-main\src\beta\beta.ino:771:10: error: 'tuh_midi_configured' was not declared in this scope; did you mean 'tuh_configure'?
771 | if (!tuh_midi_configured(midi_dev_addr)) {
| ^~~~~~~~~~~~~~~~~~~
| tuh_configure
E:\Users\Jungle Boy\Documents\Arduino\libraries\PicoZoom-main\src\beta\beta.ino:777:9: error: 'tuh_midih_get_num_rx_cables' was not declared in this scope
777 | if (tuh_midih_get_num_rx_cables(midi_dev_addr) < 1) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
E:\Users\Jungle Boy\Documents\Arduino\libraries\PicoZoom-main\src\beta\beta.ino:781:5: error: 'tuh_midi_read_poll' was not declared in this scope; did you mean 'tud_midi_read'?
781 | tuh_midi_read_poll(midi_dev_addr);
| ^~~~~~~~~~~~~~~~~~
| tud_midi_read
E:\Users\Jungle Boy\Documents\Arduino\libraries\PicoZoom-main\src\beta\beta.ino: In function 'void midi_host_task()':
E:\Users\Jungle Boy\Documents\Arduino\libraries\PicoZoom-main\src\beta\beta.ino:790:5: error: 'tuh_midi_stream_flush' was not declared in this scope; did you mean 'tud_midi_stream_write'?
790 | tuh_midi_stream_flush(midi_dev_addr);
| ^~~~~~~~~~~~~~~~~~~~~
| tud_midi_stream_write
E:\Users\Jungle Boy\Documents\Arduino\libraries\PicoZoom-main\src\beta\beta.ino: In function 'void send_sysex(uint8_t*, int)':
E:\Users\Jungle Boy\Documents\Arduino\libraries\PicoZoom-main\src\beta\beta.ino:878:5: error: 'tuh_midi_packet_write' was not declared in this scope; did you mean 'tud_midi_packet_write'?
878 | tuh_midi_packet_write(midi_dev_addr, packet);
| ^~~~~~~~~~~~~~~~~~~~~
| tud_midi_packet_write
E:\Users\Jungle Boy\Documents\Arduino\libraries\PicoZoom-main\src\beta\beta.ino: In function 'void tuh_midi_rx_cb(uint8_t, uint32_t)':
E:\Users\Jungle Boy\Documents\Arduino\libraries\PicoZoom-main\src\beta\beta.ino:930:11: error: 'tuh_midi_packet_read' was not declared in this scope; did you mean 'tud_midi_packet_read'?
930 | if (tuh_midi_packet_read(dev_addr, packet)) {
| ^~~~~~~~~~~~~~~~~~~~
| tud_midi_packet_read
Multiple libraries were found for "Adafruit_TinyUSB.h"
Used: E:\Users\Jungle Boy\Documents\Arduino\libraries\Adafruit_TinyUSB_Arduino-master
Not used: C:\Users\Jungle Boy\AppData\Local\Arduino15\packages\rp2040\hardware\rp2040\3.1.1\libraries\Adafruit_TinyUSB_Arduino
Using library MIDI Library at version 5.0.2 in folder: E:\Users\Jungle Boy\Documents\Arduino\libraries\MIDI_Library
Using library Pico PIO USB at version 0.5.2 in folder: E:\Users\Jungle Boy\Documents\Arduino\libraries\Pico_PIO_USB
Using library Adafruit TinyUSB Library at version 2.0.3 in folder: E:\Users\Jungle Boy\Documents\Arduino\libraries\Adafruit_TinyUSB_Arduino-master
Using library Adafruit GFX Library at version 1.11.5 in folder: E:\Users\Jungle Boy\Documents\Arduino\libraries\Adafruit_GFX_Library
Using library Adafruit BusIO at version 1.14.1 in folder: E:\Users\Jungle Boy\Documents\Arduino\libraries\Adafruit_BusIO
Using library Wire at version 1.0 in folder: C:\Users\Jungle Boy\AppData\Local\Arduino15\packages\rp2040\hardware\rp2040\3.1.1\libraries\Wire
Using library SPI at version 1.0 in folder: C:\Users\Jungle Boy\AppData\Local\Arduino15\packages\rp2040\hardware\rp2040\3.1.1\libraries\SPI
Using library Adafruit SSD1306 at version 2.5.7 in folder: E:\Users\Jungle Boy\Documents\Arduino\libraries\Adafruit_SSD1306
exit status 1

Compilation error: 'tuh_midi_configured' was not declared in this scope; did you mean 'tuh_configure'?

from picozoom.

A wise man told me to use the search and I realized that I had the same isse as issue #1

Now it is compiling and thank you once again!

from picozoom.