Issues with iClass and Omnikey 5321 running on Win10? about iclass HOT 6 OPEN

I got this working successfully on a 32-bit Windows 10 machine with all the latest updates. Since Windows 10 now has a built-in driver for both the Omnikey 5321 and the 6321, you have to manually point Windows to the driver installed by the package in this repository. Once you do that, it should work like a charm!

from iclass.

@dronenb That's pretty interesting! Think you could grab some screenshots pointing out how to switch drivers?

from iclass.

First, you must install the driver provided in the repo.

In device manager, you should see your Omnikey listed under "Smart card readers"
Right click on the Omnikey, then select "Properties"

In the properties for the Omnikey, click the "Drivers" tab

In the drivers page, click "Update Driver"

Click on "Browse my computer for driver software"

Click on "Let me pick from a list of available drivers on my computer"

Click on "Have Disk..."

Click on "Browse"

Click on "This PC"
Then select you C:\ drive

Click on the folder entitled "OMNIKEY"

Click on the folder entitled "5x21_V1_2_0_14"

Click on the folder entitled "W32"

Click on the file called "cxru0wdm"
Click "Open"

Click "OK" in the "Install From Disk" window

Click "Next" in the update drivers window

Now if you go back into the properties of your Omnikey, you should see that the driver has been downgraded, so it should now work with the software provided in this repo!

from iclass.

Has anyone managed to get this running with a 64-bit machine?

from iclass.

I haven't tried it with a 64 bit machine.... not sure if it'd work or not.

from iclass.

I gave it a shot, and the 2009 driver is not compatible with 64-bit Windows 10 (HID's website mentions a 64-bit version of this driver exists, but I can't find it - @Supercodegames may have a copy). The instructions above work like a charm on 32-bit Windows 10 though!

from iclass.