play in signal to a network about andes HOT 11 CLOSED

Hi @1rashiid ,

This feature is not currently supported but worth doing. I will assign an enhancement label for the issue.

Does Powerworld or PSS/E allow replaying any variable data or a specific set (say, voltages, frequency among others)?

from andes.

I found the slides at https://www.wecc.org/Reliability/Wkshp_ATC_Playback_Model_Validation.pptx. Is it the PLBVFU1 model that specifically implements the requested function?

from andes.

Yes. The concept is known as "playback event" and it is used for model validation and calibration. The PMU catches the dynamic of the system. Then, voltage, and voltage phase (or frequency) are play into the model and real and reactive are computed and compared with the P and Q which capture with PMU. This function is "plbvfu1" in PSSE. There are some paper which explain this concept also:
1- Response-Surface-Based Bayesian Inference for Power System Dynamic Parameter Estimation
2- Calibrating Parameters of Power System Stability Models Using Advanced Ensemble Kalman Filter
3- PMU Measurement Based Generator Parameter Calibration by Black-Box Optimization with A Stochastic Radial Basis Function Surrogate Model

from andes.

I found the slides at https://www.wecc.org/Reliability/Wkshp_ATC_Playback_Model_Validation.pptx. Is it the PLBVFU1 model that specifically implements the requested function?

Yes exactly.

from andes.

Yes. The concept is known as "playback event" and it is used for model validation and calibration. The PMU catches the dynamic of the system. Then, voltage, and voltage phase (or frequency) are play into the model and real and reactive are computed and compared with the P and Q which capture with PMU. This function is "plbvfu1" in PSSE. There are some paper which explain this concept also:
1- Response-Surface-Based Bayesian Inference for Power System Dynamic Parameter Estimation
2- Calibrating Parameters of Power System Stability Models Using Advanced Ensemble Kalman Filter
3- PMU Measurement Based Generator Parameter Calibration by Black-Box Optimization with A Stochastic Radial Basis Function Surrogate Model

Thanks for pointing to these references. Let me look into adding this feature to ANDES.

from andes.

I found the slides at https://www.wecc.org/Reliability/Wkshp_ATC_Playback_Model_Validation.pptx. Is it the PLBVFU1 model that specifically implements the requested function?

Yes exactly.

Great. I don't have a clear timeline for finishing the feature though. Expect to be in a couple of months given my current workload.

from andes.

Working on this currently:
[x] define a TimeSeries model to read time-series data from a xlsx file

• define a generator to represent the voltage behind the impedance
• develop the PLBVFU1 model to use the data from the .plb file.

from andes.

A PLBVFU1 model has been implemented. It supports per unit values only for now. See the docs for limitations.

An example can be found in andes/cases/ieee14_plbvfu1.xlsx.

from andes.

Please report back and reopen the issue if needed. Thanks.

from andes.

Thanks for adding this feature to the package.

from andes.

from andes.