Make footprints easier to hand solder about cellphone2hw HOT 2 OPEN

Thanks for the feedback! When I revise the board next I'll see about incorporating these suggestions.

BTW, did you order all the parts / circuit board yourself? Or was this part of a workshop or similar?

from cellphone2hw.

Hi, I participated in the pre/test workshop done by Tricia and David at
Stpln in Malmö, Sweden last weekend. Here are some info from Tricia
http://wpmu.mah.se/m11p0636/ It took something like 15 hours to assemble
the thing into a working condition.

They ordered most parts from Farnell and the displays from two swedish
shops (http://www.lawicel-shop.se/ and https://www.electrokit.com/en/) but
had some problems finding the exact parts. (keys have different footprints,
and the M0 screws can't be found at all here)

/Anders H.
Ps. Since you showed how to use the ATMega1284 I'm currently trying to get
it to replace the ATMega328p in my own sensor GSM unit as I hit some not so
fun memory limits. Ds.

On Sat, Jun 8, 2013 at 5:21 PM, David A. Mellis [email protected]:

Thanks for the feedback! When I revise the board next I'll see about
incorporating these suggestions.

BTW, did you order all the parts / circuit board yourself? Or was this
part of a workshop or similar?

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/18#issuecomment-19150277
.

Anders Hedberg,
mobile +46 733 320 196

from cellphone2hw.