RaspberriPI Zero: not work led about assistants HOT 1 OPEN

First of all, Building of an Assistants with Raspberry Pi Zero is so difficult and require a lot of time.

I write several advices but no guarantee you succeed to build.

1. You must execute whole installation process of an Assistants with raspberry pi zero.
   In other words, you can't use an Assistants that is built with other Raspberry pi(3,3A,3B,4 etc...).
   (for example you can't port a SD card that installed Assistants from another Pi)

2. If you use Respeaker 6-Mic, when Respeaker setup, you must specify "Respeaker4Mic_Setup.sh"

3. You can use seeed official installation procedure to check whether LED of your Respeaker work. Check it especially "Play with LEDs".
   http://wiki.seeedstudio.com/ReSpeaker_6-Mic_Circular_Array_kit_for_Raspberry_Pi/

4. Power supply, I recommended you use a USB AC adapter with a supply capacity of 5V/2A or more.

I have succeeded turn on LED of 6-Mic with Pi Zero with an installation procedure of an Assistants properly.

As a comment, if you use 6-Mic, I recommend using Raspberry Pi 3. When using 6-Mic, there is no advantage with Pi Zero.

from assistants.