No documentation for hardware configuration about doorbot-setup HOT 6 CLOSED

@helicalbytes soldered up another PCB over the weekend and the soundcard worked fine on that - it's now installed on the Kitchen doorbot. So the remaining testing for this is done.

from doorbot-setup.

The schematic in https://github.com/DoESLiverpool/doorbot-setup/tree/master/hardware should be correct, and fairly soon we should have a finished PCB design to go with it (and to upgrade the existing doorbots)

from doorbot-setup.

With e998aa4 we have the first version (or at least the first version to make into a PCB to try...). @goatchurchprime is going to use it to test making PCBs on the Arcitype mill.

from doorbot-setup.

Latest PCB design sent off to DirtyPCBs. We can update this if/when it works.

from doorbot-setup.

PCBs have arrived. We need a few more parts to fully populate them, so they're on order from Farnell and should be with us tomorrow.

from doorbot-setup.

As can be seen in the comments on DoESLiverpool/somebody-should#162 the PCB design works, apart from the soundcard (which might work, but hasn't been demonstrated to yet). DoESLiverpool/somebody-should#576 will cover the remaining testing work for this.

from doorbot-setup.