Solid Black Barcodes When Printing about dymo-connect-framework HOT 11 OPEN

Wish I knew. We waiting 30 min on hold to schedule a DYMO support call, and the support agent didn't seem to know the DYMO Web Service + this SDK even existed. It's apparently being updated at times, but simultaneously feels neglected.

from dymo-connect-framework.

Is this Windows or Mac? When we've seen issues with labels printing all black, our recommendation to users is to uninstall and reinstall the DYMO software and that usually clears it up.

Note that the 550 series requires DYMO Connect, and on Mac DYMO Connect does not have the DYMO Web Service supported yet, so it is not possible to use the 550s on Mac with web printing just yet.

from dymo-connect-framework.

This is happening on Windows. It's happens on two separate computers with a fresh install of Dymo connect.

from dymo-connect-framework.

Sorry, I don't have any other ideas for you. If you open that XML label in DCD software does it still print the black box?

from dymo-connect-framework.

I'll try that. What DCD software can you recommend? I've attached example XML below in case its helpful. Thanks for all the help so far.

<?xml version="1.0" encoding="utf-8"?>
<DieCutLabel Version="8.0" Units="twips">
  <PaperOrientation>Landscape</PaperOrientation>
  <Id>Address</Id>
  <PaperName>30252 Address</PaperName>
  <DrawCommands>
    <RoundRectangle X="0" Y="0" Width="1581" Height="5040" Rx="270" Ry="270" />
  </DrawCommands>
  <ObjectInfo>
    <BarcodeObject>
      <Name>123456</Name>
      <ForeColor Alpha="255" Red="0" Green="0" Blue="0" />
      <BackColor Alpha="0" Red="255" Green="255" Blue="255" />
      <LinkedObjectName></LinkedObjectName>
      <Rotation>Rotation0</Rotation>
      <IsMirrored>False</IsMirrored>
      <IsVariable>True</IsVariable>
      <Text>1234</Text>
      <Type>Code128Auto</Type>
      <Size>Large</Size>
      <TextPosition>Bottom</TextPosition>
      <TextFont Family="Arial" Size="5" Bold="False" Italic="False" Underline="False" Strikeout="False" />
      <CheckSumFont Family="Arial" Size="7.3125" Bold="False" Italic="False" Underline="False" Strikeout="False" />
      <TextEmbedding>None</TextEmbedding>
      <ECLevel>0</ECLevel>
      <HorizontalAlignment>Center</HorizontalAlignment>
      <QuietZonesPadding Left="0" Top="0" Right="0" Bottom="0" />
    </BarcodeObject>
    <Bounds X="331" Y="680.31494140625" Width="4622" Height="765.708679199219" />
  </ObjectInfo>
  <ObjectInfo>
    <TextObject>
      <Name>Test Barcode</Name>
      <ForeColor Alpha="255" Red="0" Green="0" Blue="0" />
      <BackColor Alpha="0" Red="255" Green="255" Blue="255" />
      <LinkedObjectName></LinkedObjectName>
      <Rotation>Rotation0</Rotation>
      <IsMirrored>False</IsMirrored>
      <IsVariable>True</IsVariable>
      <HorizontalAlignment>Center</HorizontalAlignment>
      <VerticalAlignment>Top</VerticalAlignment>
      <TextFitMode>ShrinkToFit</TextFitMode>
      <UseFullFontHeight>True</UseFullFontHeight>
      <Verticalized>False</Verticalized>
      <StyledText>
        <Element>
          <String>ItemDescription</String>
          <Attributes>
            <Font Family="Arial" Size="12" Bold="True" Italic="False" Underline="False" Strikeout="False" />
            <ForeColor Alpha="255" Red="0" Green="0" Blue="0" />
          </Attributes>
        </Element>
      </StyledText>
    </TextObject>
    <Bounds X="331" Y="163" Width="4622" Height="341.566925048828" />
  </ObjectInfo>
</DieCutLabel>

from dymo-connect-framework.

@andrewcottage Just in case you didn't see, DYMO updated the framework a few weeks back with a lot of references to the new 500 series. Mostly just seems like their support for this lib is abysmal, but if you're not using that latest update, might be worth seeing if it helps barcodes on 550's.

from dymo-connect-framework.

@trevdor thanks for that. We reverted our DCD to version 1.3.2.18 and that seems to fix the issue, but the only problem is that the 550 is not supported on that version, so we are stuck with using old hardware (which is becoming harder to buy). Is there someone I should escalate this issue with at DYMO?

from dymo-connect-framework.

@trevdor did you ever get an answer? Having the same issue.

from dymo-connect-framework.

I've never tried to print a barcode, @Jarrette, but have been fighting other DYMO issues for weeks on end.
But perhaps @andrewcottage got somewhere with this one?

from dymo-connect-framework.

I've found, even with the Dymo 450, if using Dymo Connect to print barcodes sideways (which depends on the label type), they come out as black bars. Only solution I've found is reverting to Dymo Label Web Connect. But I'm on 1.4.2.82 so maybe reverting to Dymo connect 1.3 will solve for us, too.

from dymo-connect-framework.

Anyone try the newer 1.4.3.x with this issue?
I notice that now, Web Connect prints barcodes 2X as thick as in designer app. you can design a label to print barcodes just fine, but then when you print through web connect they get clipped. I think this could be related to the black bar bug, which could indicate the barcode field is too small.

from dymo-connect-framework.