Comments (18)
martonsagi
commented on June 19, 2024
1
I have experienced this today as well. Can you take look at the "Output / AL Studio" windows? Do you see any .NET Exceptions perhaps?
Investigation is underway. :)
Thanks!
from alstudio.
martonsagi
commented on June 19, 2024
1
On a side note: Window Reload (CTRL+R) command is also sufficient to escape from such situation, you don't have to actually close VSCode.
from alstudio.
NKarolak
commented on June 19, 2024
1
Thanks, the installation from OneDrive was successful. Please give me some time to observe the changes (currently I am not developing).
from alstudio.
NKarolak
commented on June 19, 2024
1
No I didn't, but on the other hand I didn't have much possibilities to observe.
Anyway, I'll close the issue, and if I encounter it again ... I'll know what to do ;-)
from alstudio.
NKarolak
commented on June 19, 2024
I needed to close VS Code right after, since it looked like an endless loop, hence I am not sure whether the following logs are really related, but the time stamp looks plausible:
[AL Studio][2020-10-14T13:02:02.072Z][Debug]: info: Microsoft.AspNetCore.Hosting.Diagnostics[1]
Request starting HTTP/1.1 POST http://localhost:30001/alstudio/negotiate?negotiateVersion=1 0
info: Microsoft.AspNetCore.Routing.EndpointMiddleware[0]
Executing endpoint '/alstudio/negotiate'
dbug: Microsoft.AspNetCore.Http.Connections.Internal.HttpConnectionManager[1]
New connection 0DfMQM8xfdjADUP74xQlXQ created.
dbug: Microsoft.AspNetCore.Http.Connections.Internal.HttpConnectionDispatcher[10]
Sending negotiation response.
info: Microsoft.AspNetCore.Routing.EndpointMiddleware[1]
Executed endpoint '/alstudio/negotiate'
[AL Studio][2020-10-14T13:02:02.096Z][Debug]: info: Microsoft.AspNetCore.Hosting.Diagnostics[2]
Request finished in 100.0044ms 200 application/json
[AL Studio][2020-10-14T13:02:02.103Z][Debug]: info: Microsoft.AspNetCore.Hosting.Diagnostics[1]
Request starting HTTP/1.1 GET http://localhost:30001/alstudio?id=u7mVmIoOtSTW7jfyYPw53g
[AL Studio][2020-10-14T13:02:02.107Z][Debug]: info: Microsoft.AspNetCore.Routing.EndpointMiddleware[0]
Executing endpoint '/alstudio'
[AL Studio][2020-10-14T13:02:02.526Z][Debug]: dbug: Microsoft.AspNetCore.Http.Connections.Internal.HttpConnectionDispatcher[4]
Establishing new connection.
dbug: Microsoft.AspNetCore.SignalR.HubConnectionHandler[5]
OnConnectedAsync started.
dbug: Microsoft.AspNetCore.Http.Connections.Internal.Transports.WebSocketsTransport[1]
Socket opened using Sub-Protocol: '(null)'.
[AL Studio][2020-10-14T13:02:02.555Z][Debug]: dbug: Microsoft.AspNetCore.SignalR.Internal.DefaultHubProtocolResolver[2]
Found protocol implementation for requested protocol: json.
[AL Studio][2020-10-14T13:02:02.562Z][Debug]: dbug: Microsoft.AspNetCore.SignalR.HubConnectionContext[1]
Completed connection handshake. Using HubProtocol 'json'.
[AL Studio][2020-10-14T13:02:03.352Z][Debug]: dbug: Microsoft.AspNetCore.SignalR.Internal.DefaultHubDispatcher[1]
Received hub invocation: InvocationMessage { InvocationId: "0", Target: "HasValidLicense", Arguments: [ ], StreamIds: [ ] }.
[AL Studio][2020-10-14T13:02:03.655Z][Debug]: dbug: Microsoft.AspNetCore.SignalR.Internal.DefaultHubDispatcher[1]
Received hub invocation: InvocationMessage { InvocationId: "1", Target: "QueryObjects", Arguments: [ System.Collections.Generic.List`1[System.String], ], StreamIds: [ ] }.
[AL Studio][2020-10-14T13:02:06.308Z][Debug]: fail: Microsoft.AspNetCore.SignalR.Internal.DefaultHubDispatcher[8]
Failed to invoke hub method 'QueryObjects'.
System.AggregateException: One or more errors occurred. (One or more errors occurred. (One or more errors occurred. (One or more errors occurred. (Destination array was not long enough. Check the destination index, length, and the array's lower bounds. (Parameter 'destinationArray'))) (Destination array was not long enough. Check the destination index, length, and the array's lower bounds. (Parameter 'destinationArray')))) (Destination array was not long enough. Check the destination index, length, and the array's lower bounds. (Parameter 'destinationArray'))
---> System.ArgumentException: Destination array was not long enough. Check the destination index, length, and the array's lower bounds. (Parameter 'destinationArray')
at System.Array.Copy(Array sourceArray, Int32 sourceIndex, Array destinationArray, Int32 destinationIndex, Int32 length, Boolean reliable)
at System.Collections.Generic.List`1.set_Capacity(Int32 value)
at System.Collections.Generic.List`1.EnsureCapacity(Int32 min)
at System.Collections.Generic.List`1.AddWithResize(T item)
at ALObjectParser.Library.ALObjectReaderNew.OnGetObjectProperty(String Line, IALSection Target, String pattern)
at ALObjectParser.Library.ALObjectReaderNew.<>c__DisplayClass21_0.<GetSectionProperties>b__2(String result)
at System.Linq.Parallel.ForAllOperator`1.ForAllEnumerator`1.MoveNext(TInput& currentElement, Int32& currentKey)
at System.Linq.Parallel.ForAllSpoolingTask`2.SpoolingWork()
at System.Linq.Parallel.SpoolingTaskBase.Work()
at System.Linq.Parallel.QueryTask.BaseWork(Object unused)
at System.Linq.Parallel.QueryTask.RunTaskSynchronously(Object o)
at System.Threading.Tasks.Task.InnerInvoke()
at System.Threading.Tasks.Task.<>c.<.cctor>b__274_0(Object obj)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
--- End of stack trace from previous location where exception was thrown ---
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.Tasks.Task.ExecuteWithThreadLocal(Task& currentTaskSlot, Thread threadPoolThread)
--- End of inner exception stack trace ---
at System.Linq.Parallel.QueryTaskGroupState.QueryEnd(Boolean userInitiatedDispose)
at System.Linq.Parallel.OrderPreservingSpoolingTask`2.Spool(QueryTaskGroupState groupState, PartitionedStream`2 partitions, Shared`1 results, TaskScheduler taskScheduler)
at System.Linq.Parallel.OrderPreservingMergeHelper`2.System.Linq.Parallel.IMergeHelper<TInputOutput>.Execute()
at System.Linq.Parallel.MergeExecutor`1.Execute()
at System.Linq.Parallel.MergeExecutor`1.Execute[TKey](PartitionedStream`2 partitions, Boolean ignoreOutput, ParallelMergeOptions options, TaskScheduler taskScheduler, Boolean isOrdered, CancellationState cancellationState, Int32 queryId)
at System.Linq.Parallel.PartitionedStreamMerger`1.Receive[TKey](PartitionedStream`2 partitionedStream)
at System.Linq.Parallel.SortQueryOperatorResults`2.ChildResultsRecipient.Receive[TKey](PartitionedStream`2 childPartitionedStream)
at System.Linq.Parallel.WhereQueryOperator`1.WrapPartitionedStream[TKey](PartitionedStream`2 inputStream, IPartitionedStreamRecipient`1 recipient, Boolean preferStriping, QuerySettings settings)
at System.Linq.Parallel.UnaryQueryOperator`2.UnaryQueryOperatorResults.ChildResultsRecipient.Receive[TKey](PartitionedStream`2 inputStream)
at System.Linq.Parallel.SelectManyQueryOperator`3.WrapPartitionedStreamNotIndexed[TLeftKey](PartitionedStream`2 inputStream, IPartitionedStreamRecipient`1 recipient, QuerySettings settings)
at System.Linq.Parallel.SelectManyQueryOperator`3.WrapPartitionedStream[TLeftKey](PartitionedStream`2 inputStream, IPartitionedStreamRecipient`1 recipient, Boolean preferStriping, QuerySettings settings)
at System.Linq.Parallel.UnaryQueryOperator`2.UnaryQueryOperatorResults.ChildResultsRecipient.Receive[TKey](PartitionedStream`2 inputStream)
at System.Linq.Parallel.WhereQueryOperator`1.WrapPartitionedStream[TKey](PartitionedStream`2 inputStream, IPartitionedStreamRecipient`1 recipient, Boolean preferStriping, QuerySettings settings)
at System.Linq.Parallel.UnaryQueryOperator`2.UnaryQueryOperatorResults.ChildResultsRecipient.Receive[TKey](PartitionedStream`2 inputStream)
at System.Linq.Parallel.UnaryQueryOperator`2.UnaryQueryOperatorResults.GivePartitionedStream(IPartitionedStreamRecipient`1 recipient)
at System.Linq.Parallel.UnaryQueryOperator`2.UnaryQueryOperatorResults.GivePartitionedStream(IPartitionedStreamRecipient`1 recipient)
at System.Linq.Parallel.UnaryQueryOperator`2.UnaryQueryOperatorResults.GivePartitionedStream(IPartitionedStreamRecipient`1 recipient)
at System.Linq.Parallel.UnaryQueryOperator`2.UnaryQueryOperatorResults.GivePartitionedStream(IPartitionedStreamRecipient`1 recipient)
at System.Linq.Parallel.SortQueryOperatorResults`2.GivePartitionedStream(IPartitionedStreamRecipient`1 recipient)
at System.Linq.Parallel.QueryOperator`1.GetOpenedEnumerator(Nullable`1 mergeOptions, Boolean suppressOrder, Boolean forEffect, QuerySettings querySettings)
at System.Linq.Parallel.QueryOpeningEnumerator`1.OpenQuery()
at System.Linq.Parallel.QueryOpeningEnumerator`1.MoveNext()
at System.Linq.ParallelEnumerable.ToList[TSource](ParallelQuery`1 source)
at ALObjectDesigner.Library.ALObjectCollector.DiscoverLocalFiles(List`1 wkspcePaths, Boolean asFilePaths)
at ALObjectDesigner.Library.ALObjectCollector.GetCollectorItems(List`1 wkspcePaths, Boolean localFiles)
at ALObjectDesigner.Library.ALObjectCollector.Discover(List`1 wkspcePaths)
at ALObjectDesigner.Library.ALObjectCollectorCacheService.LoadObjects()
at ALObjectDesigner.Library.ALObjectCollectorCacheService.GetObjects(Boolean reload)
at ALStudio.Server.ALStudioHub.QueryObjects(IEnumerable`1 paths, Nullable`1 reload)
at Microsoft.AspNetCore.SignalR.Internal.DefaultHubDispatcher`1.ExecuteHubMethod(ObjectMethodExecutor methodExecutor, THub hub, Object[] arguments)
at Microsoft.AspNetCore.SignalR.Internal.DefaultHubDispatcher`1.<>c__DisplayClass13_0.<<Invoke>g__ExecuteInvocation|0>d.MoveNext()
[AL Studio][2020-10-14T13:02:10.820Z][Debug]: dbug
[AL Studio][2020-10-14T13:02:10.820Z][Debug]: : Microsoft.AspNetCore.SignalR.Internal.DefaultHubDispatcher[1]
Received hub invocation: InvocationMessage { InvocationId: "2", Target: "QueryProjects", Arguments: [ System.Collections.Generic.List`1[System.String] ], StreamIds: [ ] }.
[AL Studio][2020-10-14T13:02:12.069Z][Debug]: dbug: Microsoft.AspNetCore.SignalR.Internal.DefaultHubDispatcher[1]
Received hub invocation: InvocationMessage { InvocationId: "3", Target: "QueryDashboard", Arguments: [ ], StreamIds: [ ] }.
[AL Studio][2020-10-14T13:02:38.291Z][Debug]: Total time: 26,2077713
[AL Studio][2020-10-14T13:02:46.710Z][Debug]: dbug: Microsoft.AspNetCore.SignalR.Internal.DefaultHubDispatcher[1]
Received hub invocation: InvocationMessage { InvocationId: "4", Target: "QueryDashboard", Arguments: [ ], StreamIds: [ ] }.
[AL Studio][2020-10-14T13:02:48.739Z][Debug]: dbug: Microsoft.AspNetCore.SignalR.Internal.DefaultHubDispatcher[1]
Received hub invocation: InvocationMessage { InvocationId: "5", Target: "QueryDashboard", Arguments: [ ], StreamIds: [ ] }.
[AL Studio][2020-10-14T13:05:49.212Z][Debug]: dbug: Microsoft.AspNetCore.SignalR.Internal.DefaultHubDispatcher[1]
Received hub invocation: InvocationMessage { InvocationId: "6", Target: "QueryDashboard", Arguments: [ ], StreamIds: [ ] }.
[AL Studio][2020-10-14T13:05:58.465Z][Debug]: dbug
[AL Studio][2020-10-14T13:05:58.465Z][Debug]: : Microsoft.AspNetCore.SignalR.Internal.DefaultHubDispatcher[1]
Received hub invocation: InvocationMessage { InvocationId: "7", Target: "QueryDashboard", Arguments: [ ], StreamIds: [ ] }.
[AL Studio][2020-10-14T13:08:28.191Z][Debug]: dbug: Microsoft.AspNetCore.SignalR.Internal.DefaultHubDispatcher[1]
Received hub invocation: InvocationMessage { InvocationId: "8", Target: "QueryDashboard", Arguments: [ ], StreamIds: [ ] }.
[AL Studio][2020-10-14T13:08:33.525Z][Debug]: dbug: Microsoft.AspNetCore.SignalR.Internal.DefaultHubDispatcher[1]
Received hub invocation: InvocationMessage { InvocationId: "9", Target: "QueryDashboard", Arguments: [ ], StreamIds: [ ] }.
from alstudio.
martonsagi
commented on June 19, 2024
It is helpful, thank you.
from alstudio.
martonsagi
commented on June 19, 2024
@NKarolak do you have the following extensions activated?
- AL XML Documentation
- Waldo's CRS Extension
from alstudio.
martonsagi
commented on June 19, 2024
I have uploaded a new custom build with fixes, please check it: https://github.com/dynasist/ALStudio/blob/master/builds/al-studio-0.9.999-issue5.vsix
(It should also be a bit faster thanks to .NET 5 :)
from alstudio.
NKarolak
commented on June 19, 2024
I am using only Waldo's extension from your list.
Thanks, but I cannot install your VSIX:
Corrupt ZIP: end of central directory record signature not found
from alstudio.
martonsagi
commented on June 19, 2024
Strange. I just downloaded and installed it from the link, it worked. Can you download it again? Perhaps it was really a network issue for the first download. Alternatively, I sent you a OneDrive link on Twitter.
from alstudio.
NKarolak
commented on June 19, 2024
Still using the "issue5" version, the issue occurred again.
This time, I was on a Base Application 17.0 repository, SalesOrder.Page.al, and I searched for action names using the search function, probably before the AL Studio was completely loaded.
The following error was looped:
[AL Studio][2020-10-16T11:44:36.013Z][Debug]: fail: Microsoft.AspNetCore.SignalR.HubConnectionContext[6]
--
Failed writing message. Aborting connection.
System.NullReferenceException: Object reference not set to an instance of an object.
at ALObjectDesigner.Library.ALObjectCollector.<>c__DisplayClass19_2.<Discover>b__2(ALPropertyCollectionItem f)
at System.Linq.Enumerable.TryGetFirst[TSource](IEnumerable`1 source, Func`2 predicate, Boolean& found)
at ALObjectDesigner.Library.ALObjectCollector.<>c__DisplayClass19_0.<Discover>b__1(ALProperty x)
at System.Linq.Enumerable.SelectListIterator`2.MoveNext()
at System.Text.Json.Serialization.Converters.IEnumerableOfTConverter`2.OnWriteResume(Utf8JsonWriter writer, TCollection value, JsonSerializerOptions options, WriteStack& state)
at System.Text.Json.Serialization.Converters.IEnumerableDefaultConverter`2.OnTryWrite(Utf8JsonWriter writer, TCollection value, JsonSerializerOptions options, WriteStack& state)
at System.Text.Json.Serialization.JsonConverter`1.TryWrite(Utf8JsonWriter writer, T& value, JsonSerializerOptions options, WriteStack& state)
at System.Text.Json.JsonPropertyInfo`1.GetMemberAndWriteJson(Object obj, WriteStack& state, Utf8JsonWriter writer)
at System.Text.Json.Serialization.Converters.ObjectDefaultConverter`1.OnTryWrite(Utf8JsonWriter writer, T value, JsonSerializerOptions options, WriteStack& state)
at System.Text.Json.Serialization.JsonConverter`1.TryWrite(Utf8JsonWriter writer, T& value, JsonSerializerOptions options, WriteStack& state)
at System.Text.Json.Serialization.Converters.ListOfTConverter`2.OnWriteResume(Utf8JsonWriter writer, TCollection value, JsonSerializerOptions options, WriteStack& state)
at System.Text.Json.Serialization.Converters.IEnumerableDefaultConverter`2.OnTryWrite(Utf8JsonWriter writer, TCollection value, JsonSerializerOptions options, WriteStack& state)
at System.Text.Json.Serialization.JsonConverter`1.TryWrite(Utf8JsonWriter writer, T& value, JsonSerializerOptions options, WriteStack& state)
at System.Text.Json.Serialization.JsonConverter`1.WriteCore(Utf8JsonWriter writer, T& value, JsonSerializerOptions options, WriteStack& state)
at System.Text.Json.Serialization.JsonConverter`1.WriteCoreAsObject(Utf8JsonWriter writer, Object value, JsonSerializerOptions options, WriteStack& state)
at System.Text.Json.JsonSerializer.WriteCore[TValue](JsonConverter jsonConverter, Utf8JsonWriter writer, TValue& value, JsonSerializerOptions options, WriteStack& state)
at System.Text.Json.JsonSerializer.WriteCore[TValue](Utf8JsonWriter writer, TValue& value, Type inputType, JsonSerializerOptions options)
at System.Text.Json.JsonSerializer.Serialize(Utf8JsonWriter writer, Object value, Type inputType, JsonSerializerOptions options)
at Microsoft.AspNetCore.SignalR.Protocol.JsonHubProtocol.WriteArguments(Object[] arguments, Utf8JsonWriter writer)
at Microsoft.AspNetCore.SignalR.Protocol.JsonHubProtocol.WriteInvocationMessage(InvocationMessage message, Utf8JsonWriter writer)
at Microsoft.AspNetCore.SignalR.Protocol.JsonHubProtocol.WriteMessageCore(HubMessage message, IBufferWriter`1 stream)
at Microsoft.AspNetCore.SignalR.Protocol.JsonHubProtocol.WriteMessage(HubMessage message, IBufferWriter`1 output)
at Microsoft.AspNetCore.SignalR.Protocol.HubProtocolExtensions.GetMessageBytes(IHubProtocol hubProtocol, HubMessage message)
at Microsoft.AspNetCore.SignalR.Protocol.JsonHubProtocol.GetMessageBytes(HubMessage message)
at Microsoft.AspNetCore.SignalR.SerializedHubMessage.GetSerializedMessage(IHubProtocol protocol)
at Microsoft.AspNetCore.SignalR.HubConnectionContext.WriteCore(SerializedHubMessage message, CancellationToken cancellationToken)
Scrolling up the log, the first error was
See ****** NEW LINE *******
[AL Studio][2020-10-16T11:43:04.267Z][Debug]: fail: Microsoft.AspNetCore.SignalR.HubConnectionContext[6]
--
Failed writing message. Aborting connection.
System.NullReferenceException: Object reference not set to an instance of an object.
at ALObjectDesigner.Library.ALObjectCollector.<>c__DisplayClass19_2.<Discover>b__2(ALPropertyCollectionItem f)
at System.Linq.Enumerable.TryGetFirst[TSource](IEnumerable`1 source, Func`2 predicate, Boolean& found)
// ****** NEW LINE ******* at System.Linq.Enumerable.FirstOrDefault[TSource](IEnumerable`1 source, Func`2 predicate)
at ALObjectDesigner.Library.ALObjectCollector.<>c__DisplayClass19_0.<Discover>b__1(ALProperty x)
at System.Linq.Enumerable.SelectListIterator`2.MoveNext()
at System.Text.Json.Serialization.Converters.IEnumerableOfTConverter`2.OnWriteResume(Utf8JsonWriter writer, TCollection value, JsonSerializerOptions options, WriteStack& state)
at System.Text.Json.Serialization.Converters.IEnumerableDefaultConverter`2.OnTryWrite(Utf8JsonWriter writer, TCollection value, JsonSerializerOptions options, WriteStack& state)
at System.Text.Json.Serialization.JsonConverter`1.TryWrite(Utf8JsonWriter writer, T& value, JsonSerializerOptions options, WriteStack& state)
at System.Text.Json.JsonPropertyInfo`1.GetMemberAndWriteJson(Object obj, WriteStack& state, Utf8JsonWriter writer)
at System.Text.Json.Serialization.Converters.ObjectDefaultConverter`1.OnTryWrite(Utf8JsonWriter writer, T value, JsonSerializerOptions options, WriteStack& state)
at System.Text.Json.Serialization.JsonConverter`1.TryWrite(Utf8JsonWriter writer, T& value, JsonSerializerOptions options, WriteStack& state)
at System.Text.Json.Serialization.Converters.ListOfTConverter`2.OnWriteResume(Utf8JsonWriter writer, TCollection value, JsonSerializerOptions options, WriteStack& state)
at System.Text.Json.Serialization.Converters.IEnumerableDefaultConverter`2.OnTryWrite(Utf8JsonWriter writer, TCollection value, JsonSerializerOptions options, WriteStack& state)
at System.Text.Json.Serialization.JsonConverter`1.TryWrite(Utf8JsonWriter writer, T& value, JsonSerializerOptions options, WriteStack& state)
at System.Text.Json.Serialization.JsonConverter`1.WriteCore(Utf8JsonWriter writer, T& value, JsonSerializerOptions options, WriteStack& state)
at System.Text.Json.Serialization.JsonConverter`1.WriteCoreAsObject(Utf8JsonWriter writer, Object value, JsonSerializerOptions options, WriteStack& state)
at System.Text.Json.JsonSerializer.WriteCore[TValue](JsonConverter jsonConverter, Utf8JsonWriter writer, TValue& value, JsonSerializerOptions options, WriteStack& state)
at System.Text.Json.JsonSerializer.WriteCore[TValue](Utf8JsonWriter writer, TValue& value, Type inputType, JsonSerializerOptions options)
at System.Text.Json.JsonSerializer.Serialize[TValue](Utf8JsonWriter writer, TValue& value, Type type, JsonSerializerOptions options)
at System.Text.Json.JsonSerializer.Serialize(Utf8JsonWriter writer, Object value, Type inputType, JsonSerializerOptions options)
at Microsoft.AspNetCore.SignalR.Protocol.JsonHubProtocol.WriteArguments(Object[] arguments, Utf8JsonWriter writer)
at Microsoft.AspNetCore.SignalR.Protocol.JsonHubProtocol.WriteInvocationMessage(InvocationMessage message, Utf8JsonWriter writer)
at Microsoft.AspNetCore.SignalR.Protocol.JsonHubProtocol.WriteMessageCore(HubMessage message, IBufferWriter`1 stream)
at Microsoft.AspNetCore.SignalR.Protocol.JsonHubProtocol.WriteMessage(HubMessage message, IBufferWriter`1 output)
at Microsoft.AspNetCore.SignalR.Protocol.HubProtocolExtensions.GetMessageBytes(IHubProtocol hubProtocol, HubMessage message)
at Microsoft.AspNetCore.SignalR.Protocol.JsonHubProtocol.GetMessageBytes(HubMessage message)
at Microsoft.AspNetCore.SignalR.SerializedHubMessage.GetSerializedMessage(IHubProtocol protocol)
at Microsoft.AspNetCore.SignalR.HubConnectionContext.WriteCore(SerializedHubMessage message, CancellationToken cancellationToken)
from alstudio.
martonsagi
commented on June 19, 2024
I was not able to reproduce this, however I tried to search within a file during extension activation. Did you refer to the built-in VSCode search functions?
I will let you know when a new internal build is available with possible fixes, I want to fix this before publishing the next beta build.
from alstudio.
NKarolak
commented on June 19, 2024
Did you refer to the built-in VSCode search functions?
Yes, Ctrl + F within the file.
from alstudio.
martonsagi
commented on June 19, 2024
@NKarolak I have published a new beta version on the Marketplace that contains all the previous fixes.
I leave this issue open until final confirmation and will publish hotfix build if the issue is still present.
from alstudio.
NKarolak
commented on June 19, 2024
OK, I am now using v0.9.564 and I would like to continue my observation, but ... AL Home does not load anymore, the page is empty, no error :-(
I have repeated it with a complete uninstall and reinstall again, but no success. No errors logged.
[AL Studio][2020-10-19T12:54:10.161Z][Debug]: AL Studio Backend is up and running.
[AL Studio][2020-10-19T12:54:10.305Z][Debug]: info: Microsoft.AspNetCore.Hosting.Diagnostics[1]
Request starting HTTP/1.1 POST http://localhost:30000/alstudio/negotiate?negotiateVersion=1 - 0
[AL Studio][2020-10-19T12:54:10.360Z][Debug]: info: Microsoft.AspNetCore.Routing.EndpointMiddleware[0]
Executing endpoint '/alstudio/negotiate'
[AL Studio][2020-10-19T12:54:10.379Z][Debug]: dbug: Microsoft.AspNetCore.Http.Connections.Internal.HttpConnectionManager[1]
New connection dj444aDQ1ephHZI7Wc3npg created.
[AL Studio][2020-10-19T12:54:10.404Z][Debug]: dbug: Microsoft.AspNetCore.Http.Connections.Internal.HttpConnectionDispatcher[10]
Sending negotiation response.
[AL Studio][2020-10-19T12:54:10.423Z][Debug]: info: Microsoft.AspNetCore.Routing.EndpointMiddleware[1]
Executed endpoint '/alstudio/negotiate'
[AL Studio][2020-10-19T12:54:10.429Z][Debug]: info: Microsoft.AspNetCore.Hosting.Diagnostics[2]
Request finished HTTP/1.1 POST http://localhost:30000/alstudio/negotiate?negotiateVersion=1 - 0 - 200 316 application/json 122.8479ms
[AL Studio][2020-10-19T12:54:10.433Z][Debug]: info: Microsoft.AspNetCore.Hosting.Diagnostics[1]
Request starting HTTP/1.1 GET http://localhost:30000/alstudio?id=9BU8MwB0oEfVPaL0gwIclg - -
info
[AL Studio][2020-10-19T12:54:10.433Z][Debug]: : Microsoft.AspNetCore.Routing.EndpointMiddleware[0]
Executing endpoint '/alstudio'
[AL Studio][2020-10-19T12:54:10.450Z][Debug]: dbug: Microsoft.AspNetCore.Http.Connections.Internal.HttpConnectionDispatcher[4]
Establishing new connection.
[AL Studio][2020-10-19T12:54:10.455Z][Debug]: dbug: Microsoft.AspNetCore.SignalR.HubConnectionHandler[5]
OnConnectedAsync started.
[AL Studio][2020-10-19T12:54:10.464Z][Debug]: dbug: Microsoft.AspNetCore.Http.Connections.Internal.Transports.WebSocketsTransport[1]
Socket opened using Sub-Protocol: '(null)'.
[AL Studio][2020-10-19T12:54:10.512Z][Debug]: dbug: Microsoft.AspNetCore.SignalR.Internal.DefaultHubProtocolResolver[2]
Found protocol implementation for requested protocol: json.
[AL Studio][2020-10-19T12:54:10.515Z][Debug]: dbug: Microsoft.AspNetCore.SignalR.HubConnectionContext[1]
Completed connection handshake. Using HubProtocol 'json'.
[AL Studio][2020-10-19T12:54:10.660Z][Debug]: dbug: Microsoft.AspNetCore.SignalR.Internal.DefaultHubDispatcher[1]
Received hub invocation: InvocationMessage { InvocationId: "0", Target: "HasValidLicense", Arguments: [ ], StreamIds: [ ] }.
[AL Studio][2020-10-19T12:54:10.803Z][Debug]: dbug: Microsoft.AspNetCore.SignalR.Internal.DefaultHubDispatcher[1]
Received hub invocation: InvocationMessage { InvocationId: "1", Target: "QueryObjects", Arguments: [ System.Collections.Generic.List`1[System.String], ], StreamIds: [ ] }.
[AL Studio][2020-10-19T12:54:15.046Z][Debug]: Total time: 4,2399897
[AL Studio][2020-10-19T12:54:15.700Z][Debug]: dbug: Microsoft.AspNetCore.SignalR.Internal.DefaultHubDispatcher[1]
Received hub invocation: InvocationMessage { InvocationId: "2", Target: "SetDirtyCache", Arguments: [ True ], StreamIds: [ ] }.
dbug: Microsoft.AspNetCore.SignalR.Internal.DefaultHubDispatcher[1]
Received hub invocation: InvocationMessage { InvocationId: "3", Target: "QueryTranslations", Arguments: [ System.Collections.Generic.List`1[System.String] ], StreamIds: [ ] }.
[AL Studio][2020-10-19T12:54:15.704Z][Debug]: Translation processing started...
[AL Studio][2020-10-19T12:54:15.933Z][Debug]: Translation processing update... 0,2281202
Translation processing ended...0,2282417
[AL Studio][2020-10-19T12:54:23.748Z][Debug]: dbug
[AL Studio][2020-10-19T12:54:23.748Z][Debug]: : Microsoft.AspNetCore.SignalR.Internal.DefaultHubDispatcher[1]
Received hub invocation: InvocationMessage { InvocationId: "4", Target: "QueryProjects", Arguments: [ System.Collections.Generic.List`1[System.String] ], StreamIds: [ ] }.
from alstudio.
martonsagi
commented on June 19, 2024
I see it, yes. It's not related to this issue, the build process did not include a webapp dependency, which was working like 3-4 hours ago :(
I'm on it, please downgrade to the previous version until then.
from alstudio.
martonsagi
commented on June 19, 2024
Fixed, autopublish should be finished within 20-25 minutes.
from alstudio.
martonsagi
commented on June 19, 2024
@NKarolak : are you still experiencing this issue?
from alstudio.
Related Issues (20)
- Tables Key List - Enabled property HOT 3
- NullReference Exception On CreateTable Extension HOT 2
- Navigate to WORD/RDCL layout that belongs to a report object that resides in a symbol file HOT 9
- Need to unblock for firewall on every update HOT 3
- Collapse all HOT 2
- An unexpected error occured invoking "querytranslations" HOT 5
- Cannot open "Fields" from AL Home HOT 1
- alstudio.scopes.json when no scopes? HOT 2
- Cannot open Layout (RDLC) of my own *.rdlc files HOT 2
- Cannot open Page Actions Source HOT 7
- test issue
- Add "scanWorkspace"-function to Api HOT 1
- Table Editor: Navigate to a field in the source code HOT 2
- Opening page designer fails HOT 5
- Extension causes high cpu load: Debugger affected HOT 3
- Interested to demo your extension in a joined Areopa webinar? HOT 1
- Translation
- Supported Check in?
- Problem with Translation Manager
- Unexpected Go To Definition when using the Ctrl key HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from alstudio.