TransmitFrame hanging sometimes about can-go HOT 4 CLOSED

Note that writing multiple frames doesn't help. If I attach a timeout to the write call, I get a continual stream of "transmit frame: write can0: I/o timeout" until a frame is transmitted by another device on the bus, and then everything starts working again.

from can-go.

This is possibly due to a "bus off" condition. If the bus is completely disconnected, it will hang, but if I even have a device monitoring the bus, it seems to turn back on.

from can-go.

Hi @johnnyb,

One of the prerequisites of the CAN protocol is that there must be at least two devices listening on the bus for correct communication (i.e. two devices must be "bus on"). Trying to transmit on a bus with only one device is not possible.

from can-go.

I would think there would need to be something that happened besides "hang indefinitely" but since this is known and I have found a workaround for myself I'll close this out.

from can-go.