Zero Index rate about emsoft HOT 12 CLOSED

Can you post the namelist file ?

Thanks,
Marc.

from emsoft.

Dear Prof. Graef,

Thanks for the quick reply.

Here are the namelist files I used.
EMEBSDDI-Ni1_test.txt
EMgetADP-Ni1_test.txt
EMEBSDDIpreview-Ni1_test.txt
EMEBSDmaster-Ni1_test.txt

Jie

from emsoft.

Can you post the output image of the EMgetADP program ? Does it look correct?

from emsoft.

Here it is. It looks correct to me.

Seems Github do not support .tiff, so I convert it into a .jpg.

from emsoft.

can you try and set numsx and numsy to 60 and binning to 1 in the EMEBSDDI namelist file ?

from emsoft.

Thanks, Prof. Graef,

I guess it is working!

Here are some screenshots. Are they correct?

Does this mean that I should always input the pixel dimensions of the pattern (instead of that of the camera) and set the binning to 1?

Jie

from emsoft.

It does not look good again. The index rate is ~14%

from emsoft.

yes, you should always enter the actual size of the patterns in the experimental file and set binning to 1.

It is possible that you need to change the sign of the pcx pattern center coordinate... there were some changes in the code after the tutorial paper was published, and I think this is one of them...

from emsoft.

I just changed the xpc from 3.4848 to -3.4848 as you suggested. The index rate increased from ~14% to ~15%.

Here is what the IPF looks like. On the top is the .ang output by EMsoft and the other one is the original data.

from emsoft.

ok, the change in the pattern size and binning parameters also requires that you multiply the detector pixel size delta by 8, and that you divide xpc and ypc by 8 ... I think those parameters were valid for the full size patterns and they must be scaled for smaller patterns.

from emsoft.

I didn't realize the connections between these parameters. Now the problem is solved. Thank you very much for your detailed explanation!

Jie

from emsoft.

No problem. Glad to help.

I will close this issue then.

from emsoft.