Comments (11)
After browsing the source of this repo, I fail to find any buildscripts :-/ Otherwise I'd be on my way to produce an arm build.
from dnsmasq-qpkg.
I am working on getting that together. In the meantime. I used debian 4, so I can say start there. https://wiki.debian.org/ArmEabiPort with http://archive.debian.org/debian/dists/Debian-4.0/main/installer-arm/20070308etch7/ if that helps you any that was where I was looking to begin. Definitely interested in trying it out.
from dnsmasq-qpkg.
Thanks! What should I read to get a general feeling of what is needed? I can certainly install an arm debian if that's required to build. I'm just a little lost in the whole build for qnap progress.
If you could share some pointers where to look and start, that would be awesome :)
from dnsmasq-qpkg.
@angerman Whew, I've been all over these past weeks for work, one more week of travel (Korea!) and then I am finally back. So sorry about the delay. I finally took the time this morning and got everything cleaned up a bit and a description typed up, I will add on, and once I get back make a go at an arm package. I hope this helps!
from dnsmasq-qpkg.
@angerman - Which NAS are you running? I want to make sure I looking at the proper architecture. Thanks! -Eric
from dnsmasq-qpkg.
@variab1e got TS-231+. Sorry for not replying earlier, things at my end are pretty crazy right now :-/
Cheers,
Moritz
Sent from my iPhone
On 28 Nov 2015, at 06:00, Eric Hiller [email protected] wrote:
@angerman - Which NAS are you running? I want to make sure I looking at the proper architecture. Thanks! -Eric
—
Reply to this email directly or view it on GitHub.
from dnsmasq-qpkg.
Hi @variab1e
Appreciate the hard work (and a bit jealous of that trip!)
:)
Much like Moritz ( @angerman ), I have an arm based system - TS-219P II running a single core Marvell Kirkwood @ 2Ghz. I believe we're looking at a ARMv5TE instruction set (not great, but its getting the job done.)
DNSMasq v2.62-1 is available via ipkg plugin, just not something with your great front end.
My Linux skills are lacking, but if there is anything I can do to assist with increasing compatibility, please let me know.
Thx,
Jordan
from dnsmasq-qpkg.
@angerman & @JFish222 Hey guys, this one took a bit longer than I was hoping, but i have an ARM version compiled now. I do not have a QNAP NAS for ARM, but I had a vm and an armv7 machine (same architecture as the QNAP ARM gear) and it tested good. So this should work from what I can tell. Please let me know if it does not. Check the new releases for the ARM version. Thank for the patience! Hope you're all having a good set of holidays.
from dnsmasq-qpkg.
Hi @variab1e ,
Much appreciated. Just one concern, the lower end units use Marvell Kirkwood chips.
These use the ARMv5TE instruction set (that just happens to be clocked extremely high).
I'll go ahead and test anyway this weekend, but if there's anything I can do on my end for ARMv5TE compilation, I'm happy to help.
from dnsmasq-qpkg.
@JFish222 Thanks much! The ARMv5TE These are what QNAP terms x09
isn't it? I just realized that today as I finally had a chance to decompress and research.
This is the processor I beleive for the TS-109 units
Your TS-231+ should be good though, it is ARMv7
from dnsmasq-qpkg.
Lol @variab1e, to many model numbers floating around . . .
@angerman has the TS-231+ (Armv7)
I have the TS-219P II
The TS-219P II uses the Kirkwood Core (ARMv5TE)
That said, QNap and Marvell had been shipping variations of the Sheeva ARMv5TE CPU for a few years, so it made it into a number of units (And these for example).
If it helps, there is already a ipkg for DNSMASQ - just lacks your front end.
If they can be deployed via 2 separate packages, it may simplify things for you a bit.
Update
I tried to install the existing package. Installation was successful, but the process refuses to start (nothing in the logs to indicate why).
I'm assuming this is an instruction set issue, but if not, I can provide a full set of notes in another ticket.
from dnsmasq-qpkg.
Related Issues (20)
- x86 architecture HOT 3
- Issue with static hosts
- Configuration Invalid / Start Failure
- Qnap TS-219PII (ARMv5e) Process Fails to Start HOT 2
- WEB UI not working on QTS 4.2.0 / TVS 863
- dnsmasq conflicts on start on ports (suspect QNAP Samba Active Directory)
- Installs, will not update any settings. TS-470Pro, v4.2.1 HOT 3
- Looking for QPKG for TS-231 HOT 2
- Can't save/edit static hostnames via web ui, get 404
- Looking for dnsmasq (qpkg) version that work with QTS 4.3.3 HOT 2
- dnsmasq not working on QTS 4.4.3
- Unable to connect when activating / opening the dnsmasq tab HOT 1
- Hardcoded to eth0 HOT 3
- Conflict with Container services HOT 2
- Web GUI Configuration issue HOT 4
- Feature Request: Tab with Start/Stop/Restart dnsmasq HOT 1
- Deletion of the conf file,log file readability HOT 2
- Server will not stop/start, not all interfaces populating HOT 2
- Installation issue on TS-109Pro HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from dnsmasq-qpkg.