IP and Port number in snmp simulator about snmpsim HOT 6 OPEN

the ip addr and port number is in the commandline that you specify to run the simulator.

from snmpsim.

Thank you for your message tkekan.

To simulate a network I run the command (snmpsim-command-responder --data-dir=./Desktop/snmprec --agent-udpv4-endpoint=127.0.0.1:1024)

./Desktop/snmprec is the directory where my snmprec file is.
Is 127.0.0.1 and 1024 are the ip address and port number of the simulated network?

This is a screenshot of the snmp simulator running. Is it correct?

from snmpsim.

Yes the simulator runs on 127.0.0.1 and port 1024. You can test this out doing a simple snmpget against that ip:port

from snmpsim.

I did a snmpwalk v2c and got an error. Is the command correct that I have used?

from snmpsim.

The community string "public" is incorrect. You will see in the output when you start the simulation that the community string is "device_192_168_184_21".

from snmpsim.

This is answered and resolved.

from snmpsim.