Comments (7)
EtteGit
commented on August 18, 2024
Hi,
As discussed in the discord channel, I think this is totally doable. The only issue this can cause is during a clog. I'm afraid of filament grinding by the ERCF gears before the encoder can sense the clog. But this is something worth a try! Have you tried something alredy?
from enragedrabbitproject.
RickDnamps
commented on August 18, 2024
Any news for this Enhancement ??? It would be a nice add-on !
from enragedrabbitproject.
RickDnamps
commented on August 18, 2024
I tried to do it but we cannot declare a pin two times in the .CFG :( I wanted to do it quickly by simply make it follow the principale extruder (there is a new klipper code who allow it now) and activate the servo and release it sometime to remove any tension or synchro. I'm not the best in programmation maybe I should work harder on that!
from enragedrabbitproject.
baccula
commented on August 18, 2024
Klipper supports duplicate pin configuration (see here
<https://www.klipper3d.org/Config_Reference.html#duplicate_pin_override> for
info). Not sure if that would accomplish what you're looking for or not.
…On Tue, Nov 15, 2022 at 1:43 PM RickDnamps ***@***.***> wrote:
I tried quickly to do So but we cannot declare a pin two times in the .CFG
:( I wanted to do it quickly by simply make it follow the principale
extruder (there is a new klipper code who allow it now) and activate the
servo and release it sometime to remove any tension or synchro. I'm not the
best in programmation maybe I should work harder on that!
—
Reply to this email directly, view it on GitHub
<#120 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AFIO24YV3LM4SS2A2CY333TWIPYWDANCNFSM53FXKN4Q>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
from enragedrabbitproject.
RickDnamps
commented on August 18, 2024
I just try the dupplicate pins like that:
[duplicate_pin_override]
pins: ercf:gpio10, ercf:gpio9, ercf:gpio8, ercf:gpio20
also tried it without ercf in front...
but that doesn't work.
Still have error message:
!pin gpio10 used multiple times in config
Once the underlying issue is corrected, use the "RESTART"
command to reload the config and restart the host software.
Printer is halted!
I try to use the gear stepper motor of the ERCF to help the filament by pushing it and by synchronize it with the main extruder.... if you can help me !!
from enragedrabbitproject.
porklander
commented on August 18, 2024
I just try the dupplicate pins like that:
[duplicate_pin_override] pins: ercf:gpio10, ercf:gpio9, ercf:gpio8, ercf:gpio20
also tried it without ercf in front...
but that doesn't work.
Still have error message: !pin gpio10 used multiple times in config
Once the underlying issue is corrected, use the "RESTART" command to reload the config and restart the host software. Printer is halted!
I try to use the gear stepper motor of the ERCF to help the filament by pushing it and by synchronize it with the main extruder.... if you can help me !!
Do you have success with this?
from enragedrabbitproject.
Anathema-Device
commented on August 18, 2024
Do you have more than one [duplicate_pin_override] defined maybe?
from enragedrabbitproject.
Related Issues (20)
- initial loading issue
- 'log_level' is not valid in section 'ercf' HOT 1
- Discord Link inactive HOT 1
- 80t pulley interference
- Please include include the BoM in files
- "Extruder not configured" with "M104 T1 S230"
- Is it possible to use ERCF without toolhead sensor? HOT 2
- MMU
- support HOT 2
- ...
- Is there an Assembly Manual for the ERP? HOT 1
- Is there an ERP discussion group in Spanish?
- How to adapt for other extruders? e.g. Microswiss ng. HOT 3
- What connects the ecas insert block to the ERCP sliding arm. HOT 1
- Dimensions of completed ERCF HOT 1
- Official CW2 support. HOT 1
- Documentation: 80T Pulley centering instructions
- tolerances of .stl parts good for resin printing? HOT 3
- Warning about EOL of toolhead sensor component
- Enraged Rabbit Carrot Feeder for Bambu Lab P1S HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from enragedrabbitproject.