TrueNas 13.0-U3.1 about iocage-fuji44-plugins HOT 6 CLOSED

I fixed anissue. Problem was with config as is. Not permissions. I replaced config with my working config from old system and right now all working fine.
Thanks a lot.

from iocage-fuji44-plugins.

Thanks for the report. It looks like it was EOL last March and no longer offered.

https://www.freebsd.org/ja/security/unsupported/

In my case, I migrated my host to TrueNAS 13.1, but did not notice it because I took over the Jail. Also, since I am using it on my internal network, I will continue to use it for a while.

It looks like you forked and upgraded to 13.1-RELEASE, did it work well?

from iocage-fuji44-plugins.

I don't have enough expiere with a jail. But I tried 13.1 and 12.3 ang got same
Stopped due to VNET failure
I'm not sure if this related to my own setting or something else.

from iocage-fuji44-plugins.

I looked at the help for the iocage command and found the --eol option to get the EOL version.
I actually ran it in my environment and was able to build flexget without any problems.

For reference, here is the command I ran

sudo iocage fetch -P flexget -n flexget2 --eol -g https://github.com/fuji44/iocage-fuji44-plugins.git ip4_addr="vnet0|192.168.10.254/24"

The -n option should be a name of your choice and the ip4_addr should be set according to your network environment.

from iocage-fuji44-plugins.

I installed success right now. Problem was with IP settings in my network.
But I got another problem. I cannot change config file. I got "Error" message in right down side of the screen. I found a file config.yml in jail and set 777 permission and flexget like an owner but without a luck

from iocage-fuji44-plugins.

I installed a new plugin and tried it. It is true that only "Error" is output. I can't figure out how to fix it, since the cause of the error is not output in the log either.

I tried manually starting flexget with the log level set to "debug," but it still did not output any useful logs.

By the way, the plugin I installed a few years ago can save config without any problem. flexget is version 3.3.38 and the permissions on config.yml were the same as in the newly installed state.

As it is, I can't determine if it's a flexget issue, permissions, or something else. First, I think you need to figure out what the flexget error is, and I suggest you talk to the flexget community.

https://flexget.com/en/NeedHelp

from iocage-fuji44-plugins.