When switching instantly between tab A and B, tab B isn't stored as the current tab until 750ms elapses about quickey HOT 7 CLOSED

Thanks for the detailed feedback! You're right, the 750ms timeout that applies while navigating through the recent stack with the Switch to next/previous tab commands can also apply after using the Switch instantly command if you then switch to another tab using some other method (like manually clicking). If you wait at least 750ms after switching from tab A to tab C with the command, clicking tab B and then pressing the shortcut will switch between B and C, as desired.

I've fixed this in a branch I've been working on for awhile, so I'd forgotten it was happening. I'm not sure how easy it would be to bring that fix into the main branch without everything else.

from quickey.

Great! I'm happy my explanation actually made sense.

It would be great to decrease this time or make it possible to do so with a slider, etc.

from quickey.

Looks like it may just be a one line change to fix this use case, so I should probably just bring it into the main branch and do a point release.

from quickey.

That would be 🧙

from quickey.

Hmm, the one line fix didn't fix this in all cases, so I'm looking into it some more.

from quickey.

Wait, nvm, it was fixed. I just confused myself with too many test versions of the extension installed. :|

from quickey.

👌

from quickey.