TV out support for the recovery menu? about recovery_menu HOT 6 CLOSED

It seems like TV output doesn't currently work properly if it wasn't properly setup previously.
Can you test if TV output works with the following build? The menu might look a bit blue now and gamepad output doesn't work, as this is still WIP, but maybe it will show TV output.
recovery_menu.zip

For everyone else stumbling across this issue:
Here is an updated build which has proper colors: recovery_menu.zip
Note that all of these builds don't support GamePad output and only output 480p, which is why they're not official releases yet.

If not you'll have to navigate the menu blindly, based on the screenshots I attached below :P

from recovery_menu.

Amazing! That one loaded up perfectly, I was able to reset the CHBC title, and this Wind Waker WiiU has new life!

Thank you, thank you, thank you!!!!

from recovery_menu.

Awesome! I'm going to keep this issue open until TV support is properly implemented.

from recovery_menu.

It worked perfectly with a wii u or error 160-0101, without a pad.

Console recovered. Thank you

from recovery_menu.

FYI: The video out does not work if the console is set to AV out, which is the factory default. So if you removed the CRC battery at some point, it will default to AV. The recovery_menu build then forces the output to HDMI, which shows either garbled or blank. But the menu is there and navigating it blind, thanks to the screenshots, helped fix my bricked console.

from recovery_menu.

Version 0.2 now comes with a display controller initialization build.

from recovery_menu.