garystofer Goto Github PK

51113a

Automatically exported from code.google.com/p/51113a

air_lcd-3oil

3x oil temp measurment with NTC, 2x8 LCD display and rotary knob for menu navigation

air_lcd_all

A bunch of applications for the AIR_LCD_uino board -- select which features to show up in the menu with #defines

air_lcduino

Uino based LCD instrument to display Atmosphere and Wind related measurments.

air_tft_12adc

12x ADC for EGT and CHT on a TFT display using an ATMEGA 328P controller

aprs_nanomodem

Hardware and software for APRS modem used on WX station

arduino__mysensors

MySensors Arduino Library and examples

arduino_magnetometer

3D magnetometer code using quaternions to resolve full 3D 360 range of indication propely

arduino_nds

Arduino interface to Nintento NDS -- read and controls all NDS buttons from Arduino program

arduino_quad_encoder

Eaxample of how to read a quadrature encoder know in the Arduino environment

arduino_windsensor_lcd

Arduino based wind instrument that reads out on LCD -- High res solid state sensors from http://wws.us.to

arunimkii

PCB run ERSKY firmware on old RC transmitters -- Originated from AR9X and ARUni schematic as designed by flygear -- on RCgroups

avr_8bit

camerawebserver

ESP32 camera webserver for AI-Thinker ESP32 camera board. Example project from Espresive

diy-multiprotocol-tx-module

Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.

diyspy_2_4_ghz

Wifi spectrum scanner based on MSP430-RF2500 device and Processing for display on PC

ds2502_dell_ps

Arduino script for programming a one wire DS2502 device so that it identifies itself as a 90W power AC powersupply

eagle4_pcb

eagle5_pcb

edgestar

SSU cubesat project

fppool

freecut

Free cutting firmware replacement for cricut hardware that supports gcode and hpgl

freeexpression

Alternate Firmware for CriCut Expression and Cake machines

geiger

Geiger Counter using Air_LCD Arduino for display -- Daugher module for Geiger circuit

gnu_makefile

My simple Makefile with automatic target and dependency creation from .c files found in a specified source directory tree.

gse-ufo-18f2540

Automatically exported from code.google.com/p/gse-ufo-18f2540

hygdisp

ir_solder_controller

IR reflow solder temperature controller, arduino based,

jq_h2ometer

lightring

LED light ring for Microscope