Sector alarm Norway about sector HOT 12 CLOSED

Ok. Then I have a good guess what’s incorrect in the update function.
Will sort it tonight and then make a comment here when I released a new version.
Thanks

Don’t forget to turn off the debug :)

from sector.

No. As far as I know it’s all the same platform/api.
Perfect if you can try and report back.

from sector.

My first attempt was not successful. Maybe i did somethings wrong.
Isn't the alarm_id number required?

from sector.

Hi.
No, it finds the panel id itself from login.
Can you turn on debug for sector and restart and check the log file (search for “sector”) where it should report where it goes wrong.
Maybe also do a check that the credentials you put in config really works if you login on sector homepage.

from sector.

I've set it up for Norway as well. I got an id and it looks ok (I think?), but state is always pending, with this information:

code_format: '^\d{4,6}$
changed_by: null
code_arm_required: true
supported_features: 3
friendly_name: Sector Alarm 12345678

(12345678 is obv not the actual value, just placeholder for this comment.. 🙃)

from sector.

Any error in the log file or even better can you turn on debug for this component?
Search for “sector” until you see an error.
Do you have last version installed?
Do you use temp sensors and locks?

from sector.

I set debug, I could only find one thing:
2020-06-07 15:50:31 DEBUG (MainThread) [custom_components.sector] Sector: Failed to get locks update: 500

It gets a good response from the IR sensors (temperatur etc). The only error I was able to find was the 500 status. I installed it today so I would assume it's the latest version. I use temp sensor & alarm, not locks.

Edit:
And I turned on debug for the component, but it still only showed up in the full log file, so RIP my mobile texteditor holy shit.

from sector.

Yep, turning off now! :)

from sector.

I did just release a bet which should address this issue.
Please switch to allow beta in the integration and install the new v0.1.6-beta version.
Please let me know if it's working after install and reboot.

from sector.

Installed, worked perfectly now. I havent tried arming it (just put the kids to bed), but the status is correct!

from sector.

Installed, worked perfectly now. I havent tried arming it (just put the kids to bed), but the status is correct!

Cool. Thanks for confirming. I close this issue now. If anything please raise a new issue ticket

from sector.

@gjohansson-ST wasnt solved after all - I tried arming today, and it failed because "lock is not defined"

from sector.