Comments (30)
lucazade
commented on May 17, 2024
not fixed.. i believe it is a different bug
from tilix.
gnunn1
commented on May 17, 2024
Thanks, can you do the following for me.
- Can you post your .zshrc file here in case it is related to that.
- Can you run the app in gdb and get a backtrace using the sequence below:
gdb terminix
This will drop you into the gdb prompt, type 'run' to start the program. It should then immediately halt and bring you back to the prompt in gdb due to the error. Type the command 'backtrace' to get the backtrace and paste the backtrace into this bug report.
from tilix.
lucazade
commented on May 17, 2024
luca@archos [01:50:00] [~]
-> % gdb terminix
GNU gdb (GDB) 7.10.1
Copyright (C) 2015 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-unknown-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from terminix...(no debugging symbols found)...done.
(gdb) run
Starting program: /usr/bin/terminix
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
[New Thread 0x7fffeb3d3700 (LWP 5712)]
[New Thread 0x7fffeabd2700 (LWP 5713)]
[New Thread 0x7fffe8a66700 (LWP 5714)]
[New Thread 0x7fffdac0f700 (LWP 5717)]
[Thread 0x7fffe8a66700 (LWP 5714) exited]
[Thread 0x7fffeabd2700 (LWP 5713) exited]
[Thread 0x7fffeb3d3700 (LWP 5712) exited]
[Thread 0x7ffff7fbb3c0 (LWP 5708) exited]
[Inferior 1 (process 5708) exited normally]
(gdb) backtrace
No stack.
(gdb)
from tilix.
lucazade
commented on May 17, 2024
luca@archos [01:51:51] [~]
-> % cat .zshrc
# Path to your oh-my-zsh installation.
export ZSH=$HOME/.oh-my-zsh
# Set name of the theme to load.
# Look in ~/.oh-my-zsh/themes/
# Optionally, if you set this to "random", it'll load a random theme each
# time that oh-my-zsh is loaded.
ZSH_THEME="crcandy"
# Uncomment the following line to use case-sensitive completion.
# CASE_SENSITIVE="true"
# Uncomment the following line to disable bi-weekly auto-update checks.
# DISABLE_AUTO_UPDATE="true"
# Uncomment the following line to change how often to auto-update (in days).
# export UPDATE_ZSH_DAYS=13
# Uncomment the following line to disable colors in ls.
# DISABLE_LS_COLORS="true"
# Uncomment the following line to disable auto-setting terminal title.
# DISABLE_AUTO_TITLE="true"
# Uncomment the following line to enable command auto-correction.
# ENABLE_CORRECTION="true"
# Uncomment the following line to display red dots whilst waiting for completion.
# COMPLETION_WAITING_DOTS="true"
# Uncomment the following line if you want to disable marking untracked files
# under VCS as dirty. This makes repository status check for large repositories
# much, much faster.
# DISABLE_UNTRACKED_FILES_DIRTY="true"
# Uncomment the following line if you want to change the command execution time
# stamp shown in the history command output.
# The optional three formats: "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd"
# HIST_STAMPS="mm/dd/yyyy"
# Would you like to use another custom folder than $ZSH/custom?
# ZSH_CUSTOM=/path/to/new-custom-folder
# Which plugins would you like to load? (plugins can be found in ~/.oh-my-zsh/plugins/*)
# Custom plugins may be added to ~/.oh-my-zsh/custom/plugins/
# Example format: plugins=(rails git textmate ruby lighthouse)
# Add wisely, as too many plugins slow down shell startup.
plugins=(git colored-man)
# User configuration
export PATH=$HOME/bin:/usr/local/bin:$PATH
# export MANPATH="/usr/local/man:$MANPATH"
source $ZSH/oh-my-zsh.sh
# You may need to manually set your language environment
# export LANG=en_US.UTF-8
# Preferred editor for local and remote sessions
# if [[ -n $SSH_CONNECTION ]]; then
# export EDITOR='vim'
# else
# export EDITOR='mvim'
# fi
# Compilation flags
# export ARCHFLAGS="-arch x86_64"
# ssh
# export SSH_KEY_PATH="~/.ssh/dsa_id"
# Set personal aliases, overriding those provided by oh-my-zsh libs,
# plugins, and themes. Aliases can be placed here, though oh-my-zsh
# users are encouraged to define aliases within the ZSH_CUSTOM folder.
# For a full list of active aliases, run `alias`.
#
# Example aliases
# alias zshconfig="mate ~/.zshrc"
# alias ohmyzsh="mate ~/.oh-my-zsh"
export HISTSIZE=9999
export HISTFILESIZE=999999
export HISTTIMEFORMAT="%F %T "
export EDITOR=nano
# aliases
alias ls="ls -Alh --color=auto --group-directories-first"
alias ps="ps -aufx"
alias osupdate="yaourt -Syua --devel --noconfirm"
alias osclean="sudo pacman -Qtdq;yes |sudo pacman -Scc; sudo pacman-optimize; sudo rm -rf ~/.cache/ ~/.thumbnails; sudo journalctl --vacuum-time=2d"
alias osglx="glxinfo | grep -i vendor; export vblank_mode=0; export __GL_SYNC_TO_VBLANK=0; glxgears"
alias osgit="git add *; git commit; git push"
alias osjournal="journalctl -b | grep -i 'error\|fail\|critical\|no \|not\|unable\|could\|doesn\|disabl' --color -A1 -B1"
alias osxorg="cat -v /var/log/Xorg.0.log | grep -i 'error\|fail\|critical\|no \|not\|unable\|could\|doesn\|disabl' --color -A1 -B1"
from tilix.
lucazade
commented on May 17, 2024
even using an empty .zshrc terminix doesn't startup
from tilix.
gnunn1
commented on May 17, 2024
Thanks for all the info, I'll do some investigation today but without a backtrace it might be challenging to figure out what is going on. I'm not sure this is related to zsh or is something else as another user has reported that zsh is working fine for him with the latest release. I assume gnome-terminal works fine for you?
from tilix.
gnunn1
commented on May 17, 2024
I'm not able to reproduce, please try the new release I just pushed. If the problem still exists I'll build a special debug version that will include some tracing to try to track this down.
from tilix.
lucazade
commented on May 17, 2024
gnome-terminal works correctly with both bash and zsh (with oh-my-zsh extension), terminix works only with bash.
I tried new terminix release but without luck, same crash at startup.
if you have a debug version I can try it.
from tilix.
phw
commented on May 17, 2024
I just tried terminix today with zsh as default. Worked as expected on my up-to-date Arch installation.
from tilix.
gnunn1
commented on May 17, 2024
I've created a dub release that includes a bunch of tracing so hopefully I can get an idea where it is failing. You can download it at http://www.gexperts.com/files/terminix.zip.
Note to install it you will need to unzip it into your / as per non-package release instructions as follows:
sudo unzip terminix.zip -d /
from tilix.
lucazade
commented on May 17, 2024
-> % terminix
2016-01-19T05:00:05.357:app.d:main:22 Starting terminix...
2016-01-19T05:00:05.357:app.d:main:43 Reading command parameters...
2016-01-19T05:00:05.357:cmdparams.d:this:36 Command Line Options:
workingDirectory:
2016-01-19T05:00:05.357:app.d:main:51 Running application...
2016-01-19T05:00:05.394:application.d:onAppStartup:212 Startup App Signal
2016-01-19T05:00:05.394:util.d:findResource:150 looking for resource /usr/local/share/terminix/resources/terminix.gresource
2016-01-19T05:00:05.394:util.d:findResource:150 looking for resource /usr/share/terminix/resources/terminix.gresource
2016-01-19T05:00:05.394:util.d:findResource:154 Resource found and registered /usr/share/terminix/resources/terminix.gresource
2016-01-19T05:00:05.412:application.d:onAppActivate:207 Activate App Signal
2016-01-19T05:00:05.413:appwindow.d:updateVisual:299 Setting rgba visual
2016-01-19T05:00:05.418:appwindow.d:createUI:746 Popover CreateUI called
2016-01-19T05:00:05.418:appwindow.d:initialize:590 Initializing with command line parameters
(terminix:3763): GLib-GIO-ERROR **: Settings schema 'com.gexperts.Terminix.Keybindings' does not contain a key named 'terminal-copy'
from tilix.
gnunn1
commented on May 17, 2024
Sorry I missed one step you need to do before running it:
sudo glib-compile-schemas /usr/share/glib-2.0/schemas/
That will fix the schema error, my apologies for missing that and thanks for your patience.
from tilix.
lucazade
commented on May 17, 2024
now it started correctly...
luca@archos [09:14:44] [~]
-> % terminix
2016-01-19T09:14:47.180:app.d:main:22 Starting terminix...
2016-01-19T09:14:47.180:app.d:main:43 Reading command parameters...
2016-01-19T09:14:47.181:cmdparams.d:this:36 Command Line Options:
workingDirectory:
2016-01-19T09:14:47.181:app.d:main:51 Running application...
2016-01-19T09:14:47.215:application.d:onAppStartup:212 Startup App Signal
2016-01-19T09:14:47.215:util.d:findResource:150 looking for resource /usr/local/share/terminix/resources/terminix.gresource
2016-01-19T09:14:47.215:util.d:findResource:150 looking for resource /usr/share/terminix/resources/terminix.gresource
2016-01-19T09:14:47.215:util.d:findResource:154 Resource found and registered /usr/share/terminix/resources/terminix.gresource
2016-01-19T09:14:47.233:application.d:onAppActivate:207 Activate App Signal
2016-01-19T09:14:47.234:appwindow.d:updateVisual:299 Setting rgba visual
2016-01-19T09:14:47.238:appwindow.d:createUI:746 Popover CreateUI called
2016-01-19T09:14:47.239:appwindow.d:initialize:590 Initializing with command line parameters
2016-01-19T09:14:47.249:terminal.d:setupDragAndDrop:901 Setting up drag and drop
2016-01-19T09:14:47.249:terminal.d:setupDragAndDrop:923 Drag and drop completed
2016-01-19T09:14:47.249:terminal.d:this:1169 Apply preferences
2016-01-19T09:14:47.249:terminal.d:this:1171 Profile Event Handler
2016-01-19T09:14:47.250:terminal.d:this:1173 Finished creation
2016-01-19T09:14:47.250:terminal.d:initTerminal:1184 Initializing Terminal
2016-01-19T09:14:47.250:terminal.d:spawnTerminalProcess:869 Argument: /bin/zsh
2016-01-19T09:14:47.251:terminal.d:initTerminal:1188 Set VTE Size for rows 24
2016-01-19T09:14:47.251:terminal.d:initTerminal:1189 Set VTE Size for columns 80
2016-01-19T09:14:47.251:terminal.d:initTerminal:1192 Terminal initialized
2016-01-19T09:14:47.251:terminal.d:updateTitle:579 Terminal not initialized yet, no path available
2016-01-19T09:14:47.366:terminal.d:__dgliteral1:485 Window title changed, pid=6002 'luca@archos: ''
2016-01-19T09:14:47.366:terminal.d:updateTitle:577 Current directory is
2016-01-19T09:14:47.366:terminal.d:__dgliteral2:490 Icon title changed, pid=6002 '
2016-01-19T09:14:47.366:terminal.d:updateTitle:577 Current directory is
from tilix.
gnunn1
commented on May 17, 2024
That's awesome, I spent some time tweaking things to get it closer to how gnome-terminal interacts with the VTE back-end so maybe that did the trick. Can you confirm that the new 0.38.0 release in AUR works for you as well and if so close this issue.
from tilix.
lucazade
commented on May 17, 2024
removed terminix from my machine and then installed 0.38.0 from AUR but it doesn't work..
there is something in the debug release that solve the issue
from tilix.
gnunn1
commented on May 17, 2024
That's disappointing, the only thing I can think of that is causing this is a compiler optimization in the release version. If you have the time to help with this, what I can do is start with the debug version and then add the release compiler switches to it one at a time to try to find which one is causing the issue.
I've uploaded a baseline version at http://gexperts.com/files/terminix-test.zip, this uses a custom build setting that is functionally equivalent to the debug. Can you try this and confirm that it works and if it does I'll upload a new version with one of the switches enabled.
from tilix.
lucazade
commented on May 17, 2024
it works :)
from tilix.
gnunn1
commented on May 17, 2024
Thanks, can you try this one next, I disabled bounds checking
http://gexperts.com/files/terminix-test2.zip
from tilix.
lucazade
commented on May 17, 2024
i confirm it works also this one!
from tilix.
gnunn1
commented on May 17, 2024
To try to speed this up a bit I went ahead and pre-built three more versions with each one having a different flag enabled:
"buildOptions": ["noBoundsCheck", "releaseMode", "debugInfo"]
http://gexperts.com/files/terminix-test3.zip
["noBoundsCheck", "optimize", "releaseMode", "debugInfo"]
http://gexperts.com/files/terminix-test4.zip
["noBoundsCheck", "optimize", "inline", "releaseMode", "debugInfo"]
http://gexperts.com/files/terminix-test5.zip
Please try them out and let me know if any fail, thanks for your time in doing this, really appreciate it.
from tilix.
lucazade
commented on May 17, 2024
Tried and all of these releases work correctly.
I'm wondering if it is just related to debugInfo and not to compiler flags (I'm saying because official release doesn't show output in terminal and it doesn't work)
luca@archos [04:42:15] [/mnt/Estesa/Scaricati]
-> % sudo unzip terminix-test3.zip -d /
[sudo] password di luca:
Archive: terminix-test3.zip
replace /usr/bin/terminix? [y]es, [n]o, [A]ll, [N]one, [r]ename: A
inflating: /usr/bin/terminix
inflating: /usr/share/applications/com.gexperts.Terminix.desktop
inflating: /usr/share/terminix/schemes/tango.json
inflating: /usr/share/terminix/schemes/solarized-light.json
inflating: /usr/share/terminix/schemes/solarized-dark.json
inflating: /usr/share/terminix/schemes/orchis.json
inflating: /usr/share/terminix/schemes/linux.json
inflating: /usr/share/terminix/resources/terminix.gresource
inflating: /usr/share/glib-2.0/schemas/com.gexperts.Terminix.gschema.xml
luca@archos [04:42:25] [/mnt/Estesa/Scaricati]
-> % sudo glib-compile-schemas /usr/share/glib-2.0/schemas/
luca@archos [04:42:32] [/mnt/Estesa/Scaricati]
-> % terminix
2016-01-20T16:42:35.036:app.d:main:22 Starting terminix...
2016-01-20T16:42:35.037:app.d:main:43 Reading command parameters...
2016-01-20T16:42:35.037:cmdparams.d:this:36 Command Line Options:
workingDirectory:
2016-01-20T16:42:35.038:app.d:main:51 Running application...
2016-01-20T16:42:35.119:application.d:onAppStartup:212 Startup App Signal
2016-01-20T16:42:35.120:util.d:findResource:150 looking for resource /usr/local/share/terminix/resources/terminix.gresource
2016-01-20T16:42:35.125:util.d:findResource:150 looking for resource /usr/share/terminix/resources/terminix.gresource
2016-01-20T16:42:35.126:util.d:findResource:154 Resource found and registered /usr/share/terminix/resources/terminix.gresource
2016-01-20T16:42:35.169:application.d:onAppActivate:207 Activate App Signal
2016-01-20T16:42:35.171:appwindow.d:updateVisual:299 Setting rgba visual
2016-01-20T16:42:35.180:appwindow.d:createUI:746 Popover CreateUI called
2016-01-20T16:42:35.187:appwindow.d:initialize:590 Initializing with command line parameters
2016-01-20T16:42:35.205:terminal.d:setupDragAndDrop:901 Setting up drag and drop
2016-01-20T16:42:35.209:terminal.d:setupDragAndDrop:923 Drag and drop completed
2016-01-20T16:42:35.210:terminal.d:this:1169 Apply preferences
2016-01-20T16:42:35.210:terminal.d:this:1171 Profile Event Handler
2016-01-20T16:42:35.210:terminal.d:this:1173 Finished creation
2016-01-20T16:42:35.210:terminal.d:initTerminal:1184 Initializing Terminal
2016-01-20T16:42:35.211:terminal.d:spawnTerminalProcess:869 Argument: /bin/zsh
2016-01-20T16:42:35.212:terminal.d:initTerminal:1188 Set VTE Size for rows 24
2016-01-20T16:42:35.212:terminal.d:initTerminal:1189 Set VTE Size for columns 80
2016-01-20T16:42:35.213:terminal.d:initTerminal:1192 Terminal initialized
2016-01-20T16:42:35.213:terminal.d:updateTitle:579 Terminal not initialized yet, no path available
2016-01-20T16:42:35.413:terminal.d:__dgliteral1:485 Window title changed, pid=30906 'luca@archos: ~'
2016-01-20T16:42:35.413:terminal.d:updateTitle:577 Current directory is
2016-01-20T16:42:35.413:terminal.d:__dgliteral2:490 Icon title changed, pid=30906 '~'
2016-01-20T16:42:35.413:terminal.d:updateTitle:577 Current directory is
2016-01-20T16:42:38.443:terminal.d:isProcessRunning:1209 fg=30906 gpid=30906
2016-01-20T16:42:38.448:application.d:onAppShutdown:232 Quit App Signal
luca@archos [04:42:47] [/mnt/Estesa/Scaricati]
-> % sudo unzip terminix-test4.zip -d /
Archive: terminix-test4.zip
replace /usr/bin/terminix? [y]es, [n]o, [A]ll, [N]one, [r]ename: A
inflating: /usr/bin/terminix
inflating: /usr/share/applications/com.gexperts.Terminix.desktop
inflating: /usr/share/terminix/schemes/tango.json
inflating: /usr/share/terminix/schemes/solarized-light.json
inflating: /usr/share/terminix/schemes/solarized-dark.json
inflating: /usr/share/terminix/schemes/orchis.json
inflating: /usr/share/terminix/schemes/linux.json
inflating: /usr/share/terminix/resources/terminix.gresource
inflating: /usr/share/glib-2.0/schemas/com.gexperts.Terminix.gschema.xml
luca@archos [04:43:11] [/mnt/Estesa/Scaricati]
-> % sudo glib-compile-schemas /usr/share/glib-2.0/schemas/
luca@archos [04:43:16] [/mnt/Estesa/Scaricati]
-> % terminix
2016-01-20T16:43:18.361:app.d:main:22 Starting terminix...
2016-01-20T16:43:18.361:app.d:main:43 Reading command parameters...
2016-01-20T16:43:18.361:cmdparams.d:this:36 Command Line Options:
workingDirectory:
2016-01-20T16:43:18.362:app.d:main:51 Running application...
2016-01-20T16:43:18.438:application.d:onAppStartup:212 Startup App Signal
2016-01-20T16:43:18.438:util.d:findResource:150 looking for resource /usr/local/share/terminix/resources/terminix.gresource
2016-01-20T16:43:18.438:util.d:findResource:150 looking for resource /usr/share/terminix/resources/terminix.gresource
2016-01-20T16:43:18.438:util.d:findResource:154 Resource found and registered /usr/share/terminix/resources/terminix.gresource
2016-01-20T16:43:18.474:application.d:onAppActivate:207 Activate App Signal
2016-01-20T16:43:18.476:appwindow.d:updateVisual:299 Setting rgba visual
2016-01-20T16:43:18.507:appwindow.d:createUI:746 Popover CreateUI called
2016-01-20T16:43:18.513:appwindow.d:initialize:590 Initializing with command line parameters
2016-01-20T16:43:18.536:terminal.d:setupDragAndDrop:901 Setting up drag and drop
2016-01-20T16:43:18.540:terminal.d:setupDragAndDrop:923 Drag and drop completed
2016-01-20T16:43:18.540:terminal.d:this:1169 Apply preferences
2016-01-20T16:43:18.541:terminal.d:this:1171 Profile Event Handler
2016-01-20T16:43:18.542:terminal.d:this:1173 Finished creation
2016-01-20T16:43:18.542:terminal.d:initTerminal:1184 Initializing Terminal
2016-01-20T16:43:18.543:terminal.d:spawnTerminalProcess:869 Argument: /bin/zsh
2016-01-20T16:43:18.556:terminal.d:initTerminal:1188 Set VTE Size for rows 24
2016-01-20T16:43:18.556:terminal.d:initTerminal:1189 Set VTE Size for columns 80
2016-01-20T16:43:18.556:terminal.d:initTerminal:1192 Terminal initialized
2016-01-20T16:43:18.556:terminal.d:updateTitle:579 Terminal not initialized yet, no path available
2016-01-20T16:43:18.821:terminal.d:__dgliteral1:485 Window title changed, pid=30965 'luca@archos: ~'
2016-01-20T16:43:18.821:terminal.d:updateTitle:577 Current directory is
2016-01-20T16:43:18.821:terminal.d:__dgliteral2:490 Icon title changed, pid=30965 '~'
2016-01-20T16:43:18.821:terminal.d:updateTitle:577 Current directory is
2016-01-20T16:43:23.987:terminal.d:isProcessRunning:1209 fg=30965 gpid=30965
2016-01-20T16:43:23.991:application.d:onAppShutdown:232 Quit App Signal
luca@archos [04:43:31] [/mnt/Estesa/Scaricati]
-> % sudo unzip terminix-test5.zip -d /
Archive: terminix-test5.zip
replace /usr/bin/terminix? [y]es, [n]o, [A]ll, [N]one, [r]ename: A
inflating: /usr/bin/terminix
inflating: /usr/share/applications/com.gexperts.Terminix.desktop
inflating: /usr/share/terminix/schemes/tango.json
inflating: /usr/share/terminix/schemes/solarized-light.json
inflating: /usr/share/terminix/schemes/solarized-dark.json
inflating: /usr/share/terminix/schemes/orchis.json
inflating: /usr/share/terminix/schemes/linux.json
inflating: /usr/share/terminix/resources/terminix.gresource
inflating: /usr/share/glib-2.0/schemas/com.gexperts.Terminix.gschema.xml
luca@archos [04:44:13] [/mnt/Estesa/Scaricati]
-> % sudo glib-compile-schemas /usr/share/glib-2.0/schemas/
luca@archos [04:44:15] [/mnt/Estesa/Scaricati]
-> % terminix
2016-01-20T16:44:17.796:app.d:main:22 Starting terminix...
2016-01-20T16:44:17.796:app.d:main:43 Reading command parameters...
2016-01-20T16:44:17.797:cmdparams.d:this:36 Command Line Options:
workingDirectory:
2016-01-20T16:44:17.797:app.d:main:51 Running application...
2016-01-20T16:44:17.875:application.d:onAppStartup:212 Startup App Signal
2016-01-20T16:44:17.875:util.d:findResource:150 looking for resource /usr/local/share/terminix/resources/terminix.gresource
2016-01-20T16:44:17.875:util.d:findResource:150 looking for resource /usr/share/terminix/resources/terminix.gresource
2016-01-20T16:44:17.875:util.d:findResource:154 Resource found and registered /usr/share/terminix/resources/terminix.gresource
2016-01-20T16:44:17.921:application.d:onAppActivate:207 Activate App Signal
2016-01-20T16:44:17.928:appwindow.d:updateVisual:299 Setting rgba visual
2016-01-20T16:44:17.943:appwindow.d:createUI:746 Popover CreateUI called
2016-01-20T16:44:17.943:appwindow.d:initialize:590 Initializing with command line parameters
2016-01-20T16:44:17.962:terminal.d:setupDragAndDrop:901 Setting up drag and drop
2016-01-20T16:44:17.963:terminal.d:setupDragAndDrop:923 Drag and drop completed
2016-01-20T16:44:17.963:terminal.d:this:1169 Apply preferences
2016-01-20T16:44:17.964:terminal.d:this:1171 Profile Event Handler
2016-01-20T16:44:17.964:terminal.d:this:1173 Finished creation
2016-01-20T16:44:17.964:terminal.d:initTerminal:1184 Initializing Terminal
2016-01-20T16:44:17.965:terminal.d:spawnTerminalProcess:869 Argument: /bin/zsh
2016-01-20T16:44:17.971:terminal.d:initTerminal:1188 Set VTE Size for rows 24
2016-01-20T16:44:17.971:terminal.d:initTerminal:1189 Set VTE Size for columns 80
2016-01-20T16:44:17.971:terminal.d:initTerminal:1192 Terminal initialized
2016-01-20T16:44:17.971:terminal.d:updateTitle:579 Terminal not initialized yet, no path available
2016-01-20T16:44:18.174:terminal.d:__dgliteral1:485 Window title changed, pid=31019 'luca@archos: ~'
2016-01-20T16:44:18.174:terminal.d:updateTitle:577 Current directory is
2016-01-20T16:44:18.174:terminal.d:__dgliteral2:490 Icon title changed, pid=31019 '~'
2016-01-20T16:44:18.174:terminal.d:updateTitle:577 Current directory is
2016-01-20T16:44:27.426:terminal.d:isProcessRunning:1209 fg=31019 gpid=31019
2016-01-20T16:44:27.431:application.d:onAppShutdown:232 Quit App Signal
from tilix.
gnunn1
commented on May 17, 2024
OK, two more versions with the last one being semantically identical to how DUB builds the release but just me specifying the flags directly. If the last version works, that means either I've accidentally fixed your issue or DUB is doing more flags in then what the documentation states.
Also, that trace output is from my logging, there is a build flag to compile it out for the release version. Version 7 that I uploaded will not have this trace anymore.
Finally, you don't need to compile the schema anymore, it hasn't changed in these test versions.
(http://gexperts.com/files/terminix-test6.zip)[http://gexperts.com/files/terminix-test6.zip]
(http://gexperts.com/files/terminix-test7.zip)[http://gexperts.com/files/terminix-test7.zip]
from tilix.
lucazade
commented on May 17, 2024
both of them work correctly!
from tilix.
gnunn1
commented on May 17, 2024
Can you confirm one more time that the release version doesn't work? I'm in the middle of some changes now, but I'll do a build later tonite for you to test with the normal build release options in case I did something to fix this.
from tilix.
lucazade
commented on May 17, 2024
I confirm that 0.38.0 from AUR doesn't work.
from tilix.
gnunn1
commented on May 17, 2024
Thanks, I'll do a new build in the morning as I got distracted with some effort on localization.
from tilix.
gnunn1
commented on May 17, 2024
Here are two more, it is the same code with 8 being compiled using the switches that were the same as release and 9 being compiled with the normal release switch. If 8 works and 9 fails I'll just keep compiling it with the switches used in 8 from now on. Note you will need to compile schemas this time as I added some new preferences.
http://gexperts.com/files/terminix-test8.zip
http://gexperts.com/files/terminix-test9.zip
from tilix.
lucazade
commented on May 17, 2024
tested 8 and 9 and both works...
so i tried 0.38.0 from github tarball this time and not from aur and it works so I believe there is something broken in aur package.
from tilix.
gnunn1
commented on May 17, 2024
Thanks, there will be a new release tomorrow. Let me know if the issue still exists then and if I can look into the package in more detail.
from tilix.
lucazade
commented on May 17, 2024
0.40 from aur works correctly.. thanks for your time.. bug can be closed!
from tilix.
Related Issues (20)
- "restart the command" should not grab the focus
- Tilix fails to build with LDC HOT 1
- Enhancement: mobile friendly
- no sound on wayland
- Switching profile does not change terminal size
- Keep terminal open after command is executed from outside
- "cd .." doesn't work [finally my mistake, not an issue] HOT 7
- Adding padding?
- po4a-translate is deprecated
- Question: why these commands opens in a new Split but Split closed after finished the process? HOT 2
- Incorrect display of zsh when resizing the window
- Launch a quake window with a command executed?
- Doesnt work with Ueberzug++ for image preview
- Mouse scroll events and mouse copying requiring [Shift] HOT 2
- How do I test "scroll on output" setting?
- Copy Paste from editor over SSH - OSC 52 support HOT 3
- Titlebar too large HOT 2
- How to edit/remove the context menu
- "TerminalNot Enabled" is displayed on the screen HOT 2
- My own keyboard shortcuts don't work when Tilix is focused
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from tilix.