No or Incomplete Data showing in Home Assistant about ha-hildebrandglow-dcc HOT 8 OPEN

having the same issue...

from ha-hildebrandglow-dcc.

Same issue. Signed up to Bright yesterday, after an hour or so data was appearing in the app. Installed the Home Assistant integration and all that is being pulled through is the daily standing charge in DCC Sourced smart electricity meter Cost (today)
The DCC Sourced smart electricity meter Usage (today) is stuck on zero all the time.
In the bright app I can see the half-hourly meter data OK

from ha-hildebrandglow-dcc.

Same issue. Signed up yesterday and the Bright App is showing good data. I get standing charge and rate figures in Home Assistant but usage is showing unknown. This is for both gas and electricity.

from ha-hildebrandglow-dcc.

There is a fault with the integration not recognising the change to British Summer Time correctly. There's a fix in #331 that hasn't been merged into the core, and there's detailed instructions in #337 on how to manually install a corrected sensor.py file.
Having followed these I am now getting DCC sourced energy usage and cost into HA.
Comparing the kW import data to the same that I get from my battery inverter, the DCC data is very very similar, sometimes a touch higher, sometimes a touch lower BUT the DCC data is badly lagged and nowhere near as granular. Sometimes is 30 minutes delayed, sometimes its 3 hours delayed.
TBH this delay in the data makes the integration fairly useless as its so behind reality. At least it gives me confidence in being able to use my inverter import data

from ha-hildebrandglow-dcc.

Thanks for that. I had tried calling the API directly and had realised that it was returning two values not the one that was expected. I hadn’t realised it was providing one value for the last hour of the previous day and then the current day separately. Makes sense now and the new code summing the two values should work.

On the DCC, my understanding is the best we will get is data being pulled every 30 min for electricity. For gas it seems more like 3 or 4 times a day.

The value for me is getting the gas data into Home Assistant so I can have the complete view over time on the energy dashboard.

For electricity I am getting the inverter data every 15 seconds from the Solax-modus integration.

from ha-hildebrandglow-dcc.