I2S_MODE_DAC_BUILT_IN was not declared in void audio_init about galagino HOT 8 CLOSED

Issues with I2S have also been reported in #1. I'll check that. I am using ESP32 board support 1.0.6 which comes from https://dl.espressif.com/dl/package_esp32_index.json . Where does 2.06 come from?

The main README.md now has links to the romconv and samples directory. These now have their own romconv/README.md samples/README.md. But I have added another sentence to the main README which points to these. This should be more obvious now.

from galagino.

It seems 2.0.6 comes from here. I'll have a look at that.

from galagino.

You need the latest 2.0.6 ESP32 board support as described e.g. here: https://docs.espressif.com/projects/arduino-esp32/en/latest/installing.html

Please test and close this issue of that solves your problem.

from galagino.

I was able to downgrade to 1.0.6 and successfully verify the build. I don't have the board yet so I can't check if everything else went correctly. Thanks for updating the readme and letting me know which version to try. I recommend adding which libraries have been tested with the project to the readme, as even future updates could break compatibility further. Are you planning on updating it to work with the current latest version?

from galagino.

I just updated it to work with 2.0.6 which is the latest. I actually haven't tested if this still works with 1.0.6 but I don't expect it to work. So you might have to update to 2.0.6

from galagino.

Thank you for clarifying, I was able to start from scratch and successfully compile using the updated readme instructions and latest versions of your project with the 2.0.6 esp32 library.

I forgot to mention another dependency you may want to add to the readme, which is using "pip3 install imageio" before converting the logos with Python.

Thanks again!

from galagino.

Thank you for updating the documentation. I was able to complete my project. (The original screen was broken and the board was corroded).

The only other documentation issue I had was figuring out the buttons, which is listed in the code but unlabeled on the breadboard schematic. I did end up flipping the screen, so that feature was a perfect inclusion.

But you can close this issue, now. Thank you for making this! It was a very fun and easy project to build! I look forward to any future updates!

from galagino.

Great. Thanks for sharing.

from galagino.