Comments (31)
What worked for me is setting the Desktop size manually to 1920x1080 and in the screen map Set Area to Full desktop.
from tabletdriver.
Here's my fix (I have two monitors, CTL-672, Win10):
https://youtu.be/NWMCEBjCSWs
Win+P select only one screen, in Hawku's tablet drivers select "DISPLAY1" save, and then you Win+P again a select "Extend"
from tabletdriver.
Here for the same reason the 4 posters above are here. Windows update that I didn't ask for ruined the fun. Hoping for a workaround.
Second update: When I finished playing osu, I re-enabled my second display by re-selecting extend these displays and the tablet still covers the entire main display area. My guess is until I restart.
Update: I got the tablet functioning on my Main Display as intended but had to set display properties to show only main display and not extend/duplicate, effectively disabling my second display while using the driver.
After I changed that setting, I unchecked "auto" on the Desktop Size field and manually entered my display resolution, hit apply. Nothing changed. I re-checked "auto," hit apply again, and then it worked. I hope this helps some of you, Win10/CTL-472 here.
from tabletdriver.
Which version of Windows are you using?
I had that problem with Windows 7 and made a fix for that, but haven't yet figured out why that also happens on other Windows versions.
Workaround for that problem is to edit the Config.xml and set the DeveloperMode to true.
<DeveloperMode>true</DeveloperMode>
After that you should have desktop size settings at the bottom of the GUI:
http://hwk.fi/TabletDriver/DesktopSize.png
Uncheck the "Auto" checkbox and edit values to match with the screen area the driver can reach.
Set the screen map size to those same values.
I think that the correct values for you should be Width=1920 Height=1080
from tabletdriver.
I'm using Windows 8.1
The DeveloperMode
workaround works partially- the tablet now maps the area correctly across the two monitors. However, the 2nd monitor is still inaccessible with the tablet - the cursor gets stuck at the right edge of monitor 1.
from tabletdriver.
Tbh, I would prefer a mapping solution which provide hot key to switch mapping with each screen.
This should even be easier for user who uses different screen resolution
from tabletdriver.
@kevinwlau You also have to set the screen map width to 1920.
I'm going to make a cursor position validator that checks if the vmulti can use the full desktop area.
That might need lots of testing with different Windows versions, so it isn't a quick fix.
from tabletdriver.
@hawku I want to clarify that the settings I have screenshotted with developer mode works just as I intended. Except that I can't do anything with the second monitor.
from tabletdriver.
@kevinwlau Windows USB/HID absolute mouse handling acts differently on different systems.
On Windows 7 the absolute mouse position maps only to main monitor, but on later Windows versions it should map to the whole virtual desktop space.
Haven't tested the driver on Windows 8 or 8.1, so it be that the 8 and/or 8.1 might have the same problem as Windows 7.
There also might be a 3rd party mouse driver that replaces the default Windows absolute mouse behavior.
I have now enabled the desktop size settings to everyone in the version 0.0.16.
from tabletdriver.
I've upgraded to Windows 10 and this issue no longer occurs.
Still valid for Win 8.1 though
from tabletdriver.
I didn't have this kind of issue when I was using Windows 10 Family on my HDD, but now that I use Windows 10 Education on my SSD instead I have this same issue.
I have 2 screens : 1920x1080 and 1680x1050, and the 1680 one now can't be reached by my tablet for some reasons, even when I modify the Desktop Size Width&Height and/or the Screen Map Width/Height to 1920x1080 or 1680x1050 with DeveloperMode true.
I am using a CTH-470 and the 0.1.5.4 driver version on Windows 10 Education.
Here is a screen of my TabletDriverGUI : https://i.imgur.com/P3Qa5Xw.png
from tabletdriver.
Nevermind, I updated my Windows and now it works!
from tabletdriver.
Latest driver versions does have SendInput/Compatibility mode that might fix this problem.
from tabletdriver.
my driver all of a sudden has stopped working properly. When i reach the end of my tablet, it only reaches halfway on my monitor.
I am running on Windows 10
from tabletdriver.
I have the exact same issue. Did you, found the Problem or a Solution ?
from tabletdriver.
my driver all of a sudden has stopped working properly. When i reach the end of my tablet, it only reaches halfway on my monitor.I am running on Windows 10
i am having the same exact issue aswell, i have no solution.
from tabletdriver.
Same problem, did u guys update windows? theres an windows update since today and after i did it, the drivers only worked half a monitor. im very sad i cant play osu :CC
from tabletdriver.
I am having the same problem as well. Didn't have this problem a few hours before the windows update. Still couldn't tell what exactly is causing the issue.
from tabletdriver.
Same issue aswell. Just updated my Windows.
from tabletdriver.
Yep me too, updated windows last night. The screen maps both my monitors on my main one. Temp fix for me was to use set area as full desktop but hoping for an actual fix as it just feels off. :/
from tabletdriver.
Hi, having the same problem since the windows update
from tabletdriver.
same issue here
from tabletdriver.
just swapped to OTD, it works fine seems like the windows update has broken it. #1087
from tabletdriver.
Any solutions ? I need to close one of my monitor if I want to use my tablet
from tabletdriver.
try downloading .NET runtime from https://dotnet.microsoft.com/download/dotnet/5.0/runtime/?utm_source=getdotnetcore&utm_medium=referral
you need to choose the one that says "run desktop apps"
from tabletdriver.
Tried downloading the .net didnt work and setting the desktop area didnt work too
from tabletdriver.
What worked for me is setting the Desktop size manually to 1920x1080 and in the screen map Set Area to Full desktop.
This fixed it for me. Thanks!
from tabletdriver.
Hey everyone, I was suffering with the same problem, what worked for me was downgrading windows. Here is the tutorial I used https://www.techadvisor.com/how-to/windows/downgrade-windows-10-3696498/ Good luck osu! gamers
from tabletdriver.
I'm having the same problem but my smoothing feels like its 125hz even though its put at 1000hz
from tabletdriver.
windows update broke it for me too, if I turn off auto for the desktop size and put in my main monitor manually it works, but it really feels off. My area is the same in the settings as it was
from tabletdriver.
Good work very helpful keep it up best projector for golf simulator
from tabletdriver.
Related Issues (20)
- My cursor moves properly, but it cant click anything HOT 1
- Can't change tablet area HOT 1
- XP-Pen StarG960Plus having issues with the driver HOT 1
- Driver won't work on Veikk S640 HOT 2
- The problem with smoothing the pen HOT 2
- Not finding my tablet, i try all metods and no one work. HOT 1
- Support for Huion420X HOT 1
- Cannot detect HUION HS64 HOT 1
- I need V0.2.4 HOT 2
- Opentabletdriver Tablet Area Doesn't Change HOT 1
- Pen "buttons" doesn't work HOT 2
- add tabel HOT 1
- Help man HOT 2
- Driver Settings reset every bootup HOT 1
- CAN GAOMON M106K TABLET WORKS ON UBUNTU? HOT 1
- No tablet Detection Parblo ninos N7 HOT 1
- Issue with dual monitors HOT 1
- cant move cursor
- everything reset itself out of nowhere
- Work in? HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from tabletdriver.