Panic! about asrock-z370m-pro4-hackintosh HOT 5 CLOSED

1. Please read this article for setup details - https://khronokernel-2.gitbook.io/opencore-vanilla-desktop-guide/config.plist/coffee-lake

2. Remember to change CPU0 in this file accordingly - https://github.com/acidanthera/OpenCorePkg/blob/master/Docs/AcpiSamples/SSDT-PLUG.dsl

3. Did you set the platform-id correctly? since you only have iGPU, I think the correct platform-id for you should be 07009B3E https://github.com/corpnewt/Hackintosh-Guide/blob/master/config.plist-per-hardware/coffee-lake.md#properties

from asrock-z370m-pro4-hackintosh.

I've updated the config file, my Hackintosh works great now, wish you luck.

from asrock-z370m-pro4-hackintosh.

Could you upload your EFI folder to GitHub? it's really hard to read the text on the image.

from asrock-z370m-pro4-hackintosh.

Hi. Thanks for answering. I was going to answer you but I have seen that you have modified the ACPI folder and the config.plist and I have decided to try it before responding to this.

With this new one that you have uploaded, the PC now restarts when it tries to load. It doesn't give me time to see what the error is or why it restarts. I have entered verbose mode but I fail to see the fault that reboots the PC with your new OC.

Thank you. Regards.

from asrock-z370m-pro4-hackintosh.

Hi! Indeed, as you said, it worked for me by changing platform-id to 07009B3E and, above all, so that there were no glitches or pulls, also changing the SMBios. In my case it worked perfectly with iMac 19.1 (although I also think it would have worked with 19.2).

Thank you for your efforts and your advices. I find this change from Clover to Opencore a bit difficult xD. I had already understood how it was placed and how Clover worked.

from asrock-z370m-pro4-hackintosh.