HydraBus an open source multi-tool hardware

You can Buy HydraBus/HydraNFC Online: http://hydrabus.com/buy-online

Wiki Getting Started: https://github.com/hydrabus/hydrafw/wiki/Getting-Started-with-HydraBus

Wiki for HydraFW: https://github.com/hydrabus/hydrafw/wiki

See https://github.com/hydrabus/hydrafw

To build hydrafw see instructions here:

• Windows: https://github.com/hydrabus/hydrafw/wiki/how-to-build-flash-and-use-hydrafw-on-windows
• Linux: https://github.com/hydrabus/hydrafw/wiki/how-to-build-flash-and-use-hydrafw-on-linux

See https://github.com/micropython/micropython Tested with GCC ARM 4.9 2015q3(GNU_ARM_4_9_2015q3)

• See https://github.com/hydrabus/hydrafw_hydranfc_shield_v2/wiki How to Build/Flash/Use HydraFW for more details

To build micropython for HydraBus do:

git clone --recursive https://github.com/micropython/micropython
cd micropython/ports/stm32
make BOARD=HYDRABUS

• At end of build you shall have:
• GEN build-HYDRABUS/firmware.dfu
• GEN build-HYDRABUS/firmware.hex
• In order to flash the *.dfu follow steps here: https://github.com/hydrabus/hydrafw/wiki/Getting-Started-with-HydraBus

For more details on official micropython hydrabus port see: https://github.com/micropython/micropython/tree/master/ports/stm32/boards/HYDRABUS

See https://github.com/blacksphere/blackmagic.git

Before to build the firmware check this issue (as you need a new GCC ARM Compiler >=4.9): blackmagic-debug/blackmagic#128 Tested with GCC ARM 4.9 2015q3(GNU_ARM_4_9_2015q3)

• See working version for reference blackmagic_branch_hydrabus_Firmware 1.5-00319-g49390fe-dirty.zip:
  • https://github.com/hydrabus/hydrabus/files/11436416/blackmagic_branch_hydrabus_Firmware.1.5-00319-g49390fe-dirty.zip
• Note: Latest version of blackmagic have "Device failed enumeration" issue see #4
• See https://github.com/hydrabus/hydrafw_hydranfc_shield_v2/wiki How to Build/Flash/Use HydraFW for more details

To build Black Magic for HydraBus do:

git clone --recursive https://github.com/blacksphere/blackmagic.git
cd blackmagic
make PROBE_HOST=hydrabus

• At end of build you shall have:
• OBJCOPY blackmagic.bin
• OBJCOPY blackmagic.hex
• Creating blackmagic.dfu
• In order to flash the *.dfu follow steps here: https://github.com/bvernoux/hydrafw/wiki/Getting-Started-with-HydraBus

For more details on official blackmagic hydrabus port see: https://github.com/blacksphere/blackmagic/tree/master/src/platforms/hydrabus