Comments (6)
Hello @saberioon, as @clemgoyens said in #8 , we had the same error with Blankaart and fixed it by using lov account instead rbins one ; not sure why it worked.
Can you provide the outputs of the following command please :
awk -F "= " '/credentials/ {print $2}' config_hypernets.ini
Also the content of config_hypernets.ini could help.
Thanks,
from hypernets_tools.
These are the outputs of the following command :
ernets.ini
credentials@ip_cam_sky
credentials@ip_cam_site
[email protected]
the config file is attached too.
config_hypernets.txt
from hypernets_tools.
Okay, so I see you didn't configure your webcams yet. Maybe try to delete the the [webcam] section and related lines, then try again please
from hypernets_tools.
Okay, so I see you didn't configure your webcams yet. Maybe try to delete the [webcam] section and related lines, then try again please
I have removed the webcam section but still cannot sync. This is the output of systemctl
Mär 04 10:19:57 gfz-pc1 systemd[1]: Started Hypernets Sync Config Server and Send Data.
Mär 04 10:19:57 gfz-pc1 hello_server.sh[1560]: Sleep 30 sec
Mär 04 10:20:28 gfz-pc1 systemd[1]: hypernets-hello.service: Main process exited, code=exited, status=255/EXCEPTION
Mär 04 10:20:28 gfz-pc1 systemd[1]: hypernets-hello.service: Failed with result 'exit-code'.
from hypernets_tools.
We are having the same error:
[hypernets@hypernets-cnr1 hypernets_tools]$ sudo ./install/08_setup_server_communication.sh
[sudo] password for hypernets:
Read from config_hypernets.ini :
* Server credentials : credentials@ip_cam_sky
credentials@ip_cam_site
[email protected]@192.168.10.70
* Remote directory : /store3/HYPERNETS/incoming/
Confirm (y/n) ?y
Copy ssh-id ? \n (NPL server : yes / RBINS server : no)n
-- Journal begins at Tue 2020-09-22 19:07:01 CEST. --
mar 08 16:15:41 hypernets-cnr1 systemd[1]: Started Hypernets Sync Config Server and Send Data.
mar 08 16:15:41 hypernets-cnr1 hello_server.sh[672]: Sleep 30 sec
mar 08 16:16:13 hypernets-cnr1 systemd[1]: hypernets-hello.service: Main process exited, code=exited, status=255/EXCEPTION
mar 08 16:16:13 hypernets-cnr1 systemd[1]: hypernets-hello.service: Failed with result 'exit-code'.
-- Boot 6cb38fcfcf1c42758b84d8f87f7d903b --
mar 08 16:30:42 hypernets-cnr1 systemd[1]: Started Hypernets Sync Config Server and Send Data.
mar 08 16:30:42 hypernets-cnr1 hello_server.sh[668]: Sleep 30 sec
mar 08 16:31:14 hypernets-cnr1 systemd[1]: hypernets-hello.service: Main process exited, code=exited, status=255/EXCEPTION
mar 08 16:31:14 hypernets-cnr1 systemd[1]: hypernets-hello.service: Failed with result 'exit-code'.
mar 08 16:33:21 hypernets-cnr1 systemd[1]: Started Hypernets Sync Config Server and Send Data.
mar 08 16:33:21 hypernets-cnr1 hello_server.sh[964]: Sleep 30 sec
mar 08 16:33:52 hypernets-cnr1 systemd[1]: hypernets-hello.service: Main process exited, code=exited, status=255/EXCEPTION
mar 08 16:33:52 hypernets-cnr1 systemd[1]: hypernets-hello.service: Failed with result 'exit-code'.
We are sure we can scp to the server:
[hypernets@hypernets-cnr1 DATA]$ scp -r SEQ20210308T151625 [email protected]@192.168.10.70:/store3/HYPERNETS/incoming/
01_002_0090_2_0180_128_00_0000_03_0000.spe 100% 12KB 729.6KB/s 00:00
01_010_0090_2_0140_128_16_0000_03_0000.spe 100% 12KB 3.0MB/s 00:00
01_016_-001_2_-001.jpg 100% 260KB 11.7MB/s 00:00
01_015_0090_2_0180.jpg 100% 189KB 15.1MB/s 00:00
01_014_0090_2_0180_128_00_0000_03_0000.spe 100% 12KB 3.7MB/s 00:00
01_001_0090_2_0180_128_08_0000_03_0000.spe 100% 12KB 2.7MB/s 00:00
01_012_0090_2_0140.jpg 100% 189KB 14.6MB/s 00:00
01_013_0090_2_0180_128_08_0000_03_0000.spe 100% 12KB 2.3MB/s 00:00
01_003_0090_2_0180.jpg 100% 189KB 17.6MB/s 00:00
01_007_0090_2_0040_128_16_0000_06_0000.spe 100% 24KB 6.4MB/s 00:00
01_009_0090_2_0040.jpg 100% 670KB 28.4MB/s 00:00
01_011_0090_2_0140_128_00_0000_03_0000.spe 100% 12KB 2.9MB/s 00:00
01_008_0090_2_0040_128_00_0000_03_0000.spe 100% 12KB 3.0MB/s 00:00
01_004_0090_2_0140_128_16_0000_03_0000.spe 100% 12KB 3.6MB/s 00:00
01_017_0000_0_0000.jpg 100% 688KB 27.9MB/s 00:00
01_006_0090_2_0140.jpg 100% 189KB 19.4MB/s 00:00
01_005_0090_2_0140_128_00_0000_03_0000.spe 100% 12KB 3.5MB/s 00:00
meteo.csv 100% 37 13.5KB/s 00:00
metadata.txt 100% 1954 569.8KB/s 00:00
from hypernets_tools.
Okay, so I see you didn't configure your webcams yet. Maybe try to delete the the [webcam] section and related lines, then try again please
After deleting the webcam section, it is working now. We are trying to upload the data to a local machine for now, as we have not received the credential for the definite server yet.
from hypernets_tools.
Related Issues (20)
- Naming the webcams files with prefix HOT 3
- Reorganising the structure of /DATA HOT 1
- error:ytcp:650:tcp(111):Connection refused HOT 6
- VEIT branch stop rsync with RBINS server with new commit HOT 3
- How to access the webcams remotely HOT 2
- "voila installation_on_site.ipynb --no-browser" not working with the beta branch
- call_radiometer.py script not available in beta branch HOT 2
- beta branch: relay script without output for option -g HOT 1
- Negative absolute zenith angles HOT 1
- Add way to know when rsync is complete HOT 4
- error "3 is not a valid EntranceType" while taking picture with the GUI HOT 1
- Wrong sequence folder name HOT 1
- python 10.3.1 HOT 1
- Unable to connect to server (ytcp:489)
- UTC time / Local time
- Terminate a sequnce in middle of acquisition ?
- Crash on repeated opening of capture graphs HOT 2
- Waiting for yoctopus message !
- 00_install_yoctohub.sh not picking Yocto firmare version HOT 1
- Why does the instrument port have to be a link?
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from hypernets_tools.