HS13M - probably works the same about loctekmotion_iot HOT 8 OPEN

Not really. But if you have a RJ45 port on your controller, big chance protocol is supported. You could also open your display/remote and see what the pinout is.

from loctekmotion_iot.

Sadly no spesific Information under the cables

from loctekmotion_iot.

@SaiCode-DEV the easiest way to test this is to just hook up an ESP32 to your control box. See #67.

from loctekmotion_iot.

Hello, I also own the Flexispot E7 Pro desk. Unfortunately, with the new Office-desk.yaml configuration in ESPHome (https://github.com/iMicknl/LoctekMotion_IoT/blob/6a1da5dc22688cd4eb8ca8e90e5c4b123c4354d9/packages/office-desk.yaml), only the desk height functionality is working. All other features such as Alarm, Desk position, Preset 1, Preset 2, Sit, and Stand are non-functional.
The "desk height" however, is working perfectly and updates in real-time

I've utilized an ESP32 with this RJ45 connector layout: https://github.com/iMicknl/LoctekMotion_IoT?tab=readme-ov-file#hs01b-1

from loctekmotion_iot.

@MauiR have you tried the new configuration and pin-out from #67?

from loctekmotion_iot.

@MauiR have you tried the new configuration and pin-out from #67?

Yes, I've chosen the new configuration and pinout. However, I haven't connected SWIM and RES because there were no specifications provided for them on the ESP32.

from loctekmotion_iot.

I can say that I have now managed to get it running with the Flexispot 7 Pro. However, it only works with an ESP8266. I haven't been able to get it running with an ESP32. I'll take another closer look.

from loctekmotion_iot.