Comments (10)
The flip HA value was set to what? 0?
from indi.
Yes. NGC6888 was supposed to transit at 2:13am UTC, and the astro twilight was at 2:17am UTC. So I figured that would be a good opportunity to test the flip at the time of transit, without risking a hit into the tripod (though I was a bit optimistic: I expected more than 10cm before hit!). Note that to be on the "safe" side for the test, I also disabled the twilight check in the scheduler.
from indi.
This is a master tip build for indilib, and 2.7.8 KStars win32 from the release page (so I should probably update KStars).
from indi.
The meridian flip should have timed out and exposure aborted, (after retrying a couple more times) but without Ekos logs not much can be said.
from indi.
Trying to reproduce. I thought I had succeeded, but instead got another issue :)
When the Ekos Scheduler finishes a job and shuts down INDI, if I reconnect INDI manually (clicking on the Start button) and restart a new Scheduler job, the job starts and says capture is in progress but nothing actually starts on INDI side (not a single INDI command sent). Of course, meridian flip doesn't occur but nothing occurs at all in fact, mount keeps tracking and goes reverse. That might be related, but is definitely not the same scenario. So let's keep this one for another session.
Still trying to reproduce :)
from indi.
Small related issue reproduced, completely minor but fun when it happens:
2017-06-21T08:04:58.328 - DEBG - V4L2 CCD : "Capture of one frame (0 stacked frames) took 120.023275 seconds. "
2017-06-21T08:04:58.468 - WARN - Audio notification requested, but sound file from notifyrc file was not found, aborting audio notification
2017-06-21T08:04:58.492 - DEBG - fits MIN: 185 - fits MAX: 255 - pixel range: 70 - bin width 0.126582 bin count 554
2017-06-21T08:04:58.501 - DEBG - FITHistogram: JMIndex 0.0314366
2017-06-21T08:04:58.505 - DEBG - Capture: "Received image 10 out of 10."
2017-06-21T08:04:58.508 - DEBG - Capture: "Current hour angle 0.02 hours exceeds meridian flip limit of 0 hours. Auto meridian flip is initiated."
2017-06-21T08:04:58.509 - DEBG - ISD:Telescope: Sending coords RA 0.155126 DEC 29.1834
2017-06-21T08:04:58.530 - DEBG - EQMod Mount : "Starting Goto RA=0.155126 DE=29.1834 (current RA=0.155126 DE=29.1834) "
2017-06-21T08:04:58.563 - DEBG - EQMod Mount : "Aligned Eqmod Goto RA=0.155126 DE=29.1834 (target RA=0.155126 DE=29.1834) "
2017-06-21T08:04:58.564 - DEBG - EQMod Mount : "Setting Eqmod Goto RA=0.155126 DE=29.1834 (target RA=0.155126 DE=29.1834) "
2017-06-21T08:04:58.605 - DEBG - EQMod Mount : "Slewing mount: RA increment = -4511994, DE increment = 3048939 "
2017-06-21T08:04:58.809 - DEBG - EQMod Mount : "Slewing to RA: 0:09:18 - DEC: 29:11:00 "
2017-06-21T08:04:58.869 - DEBG - Scheduler: Find next job...
2017-06-21T08:04:59.869 - DEBG - Scheduler: Checking Park Wait State...
2017-06-21T08:04:59.869 - DEBG - Scheduler: "1 job completed."
2017-06-21T08:04:59.870 - DEBG - Scheduler: "Scheduler complete. Starting shutdown procedure..."
2017-06-21T08:04:59.871 - DEBG - Scheduler: Checking shutown state...
2017-06-21T08:04:59.872 - DEBG - Scheduler: Starting shutdown process...
2017-06-21T08:05:00.868 - DEBG - Scheduler: "Shutdown complete."
2017-06-21T08:05:00.870 - DEBG - Scheduler: Stopping Ekos...
Ekos runs a meridian flip before checking if it was processing the last job of the scheduler. So I observed the flip, and Ekos shut INDI down while the flip was still in progress! Probably this would have been different if I had checked Park Mount for the end of the plan.
But this is clearly not INDI, so I'll post a bug at KStars instead for this one.
Still trying to reproduce.
from indi.
Yeah you're starting to get into the fringe cases that slipped past me. I'll take a look at them
from indi.
I fixed the small issue regarding performing meridian flip when the job is already over. Will look into the other issue next.
from indi.
Awesome, I'll check this :)
Reproduced again something different, I'll describe it on kstars. Scenario is still short captures around meridian. This time, Ekos requested a slew between two captures, and the mount chose to run a meridian flip by itself [EDIT: two meridian flips occured in fact]. However Ekos did not wait for the end of the slew to restart the exposure. Then at the next exposure, Ekos did request a meridian flip, which did not occur, and waited for its end before restarting the exposure.
from indi.
OK, opened 381544 and 381545 at KDE Bugzilla.
from indi.
Related Issues (20)
- ieaf-focus reversing direction doesn't work HOT 3
- Pegasus PPBA/M missing auto dew aggressiveness setting HOT 4
- "Fast Exposure" option undocumented and unclear HOT 5
- Sesto Senso 2 Bug on TimerHit breaking AF Overscan in Ekos Focus HOT 1
- Sesto Senso 2 Not reporting focuser position correctly
- indi-rpicam does not install HOT 1
- Change french translation for "Pier Side" HOT 1
- Build fails with LTO HOT 3
- SCT focuser interface compliance HOT 6
- Joystick support for SCT focuser HOT 2
- Bug in fli_pdf focuser driver not handling AF Overscan properly HOT 3
- JMI MotoFocus Plus connection error HOT 14
- Telescope properties are missing on version 2.0.6 HOT 1
- Takahashi Temma Driver Co-ordinates and Feedback Bug HOT 2
- Error when compiling sources from repo HOT 3
- USB_Dewpoint HOT 5
- Add Pulse Guiding to LX200 Classic Driver over Serial Port HOT 2
- indilib.org off ?
- FITS header HOT 2
- After KStars last update, indi_scopedome_dome driver crash HOT 13
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from indi.