[Feature]: Add a flag for `ios run` to allow for building with Rosetta enabled about capacitor HOT 4 OPEN

My problem has been solved by the kind folks over at capawesome, however, I needed to edit the Podfile to make it work. This means I have to check in my ios folder, which I'd rather not do to make sure the ios and android configurations are automated (for example with Trapeze). Would it still make sense to add such a future for during development?

from capacitor.

+1

from capacitor.

My problem has been solved by the kind folks over at capawesome, however, I needed to edit the Podfile to make it work. This means I have to check in my ios folder, which I'd rather not do to make sure the ios and android configurations are automated (for example with Trapeze). Would it still make sense to add such a future for during development?

Podfile changes should be ok to commit to git, in my experience. You will have to make these modifications again if you ever remove the iOS platform and re-add it.

What specific changes did you add? I'm running into the same issue.

Also, will you be able to deploy to device? iOS devices run arm64.

from capacitor.

The solution to my problem was posted here:

capawesome-team/capacitor-mlkit#148

from capacitor.