Doube data send in matter of few seconds about vetercek_ws HOT 5 CLOSED

It might very well be that arduino reset itself because of problem with serial print buffer. Some changes have been made to enable/disable debug mode. Few days of testing will show if error is fixed...

from vetercek_ws.

I tested with turned off serial print and increased posting frequency (to increased chances of error if issue still persist) and it appears the issue is still there

from vetercek_ws.

Some debugging has showed that error is caused by arduino board reset. Now the question is, if reset is because hardware malfunction or memory error. I will make an update in the evening with the function to display available memory on every post to see which one is it.

from vetercek_ws.

Latest commit seems to fix the issue. The problem was that somewhere down the line i removed the water sensor initial command by mistake. I also split water and temperature sensor reading to two different functions. Now battery is much more stable, error haven't shown up until now. Hope this is finally fixed.

from vetercek_ws.

After minor software update and checking the pins the error didn't appear in few days. Mark as solved. Fingers crossed.

from vetercek_ws.